How to Fix a Blunt Needle

PDF download Download Article
PDF download Download Article

It can be frustrating to get the darning pile together just to discover that your needle's point is blunt or any part of your needle's surface is microscopically or visibly rough for any reason. A blunt point or rough surface on a needle can damage fabric if you try to force it through. A microscopically or visibly rough surface on a needle can falsely make the needle appear to be blunt. A microscopically rough, scratched surface on a needle can masquerade as a blunt needle point. This article provides a fast and easy technique to sharpen (only if absolutely necessary) and polish the surface of a sewing needle.

Steps

PDF download Download Article
  1. Most of us have one of these sitting about in the bathroom cabinet. A finer-grit one is much better than a coarser-grit one for this purpose, since it will leave a smoother sharpened metal surface at the point of the needle, which is highly desirable. A very-fine-grit-diamond or very-fine-grit-stone tool/knife sharpener or scrap of very-fine-grit emery paper may have a finer grit than a fingernail emery board, and may leave a smoother point on the needle after grinding, which is highly desirable for this first step in repairing any kind of blunt needle. It is highly-desirable to create an extremely-smooth final metal surface everywhere on the needle.
  2. If the point is still as sharp as it can be, then the needle may only need to be polished to improve its performance. The needle's surface might be microscopically or visibly rough because of old scratches or corrosion, making the point falsely appear to be blunt. If the point is actually blunt, then rub the emery board around only the point area of the needle --- or pull the tip of the needle backward with some downward force (while turning the needle in your fingers) on the flat very-fine-grit sharpening surface at a shallow angle, as when sharpening a knife on a flat stone. This should sharpen the needle point. Be careful to grind only the area at the point. Be careful to not scratch the manufacturer's mirror-smooth finish anywhere else on the needle. Any scratches on the needle will need to be removed later by polishing, so don't add unnecessary scratches by grinding. [1]
    Advertisement
  3. Put a dab of toothpaste (that contains polishing grit) or automobile-paint-polishing paste or metal-polishing paste on a scrap of cloth lying on top of a rubber glove (as an impermeable pad) at the extreme edge of a kitchen or bathroom countertop. Pull the needle backward on the cloth repeatedly a large number of times, with some downward force, while turning it in your fingers to polish all sides of the needle. The gritty toothpaste or other gritty polishing paste on the cloth will become increasingly blackened, indicating that the metal is being microscopically polished. Eventually, the metal will become mirror-smooth. This is a long-proven, successful final procedure that is well-worth the effort. You can also polish the entire needle in this way, which is well-worth the effort. A sewing-machine needle, for example, absolutely must have a manufacturer's mirror finish if it is to work well in the machine. Clean the polishing paste off the polished needle and off your fingers using detergent or soap, and water.
  4. If you are still experiencing difficulties in pushing through the needle after using the emery board (only if necessary) --- or other very-fine-grit grinding surface (only if necessary) --- followed by the important final polishing-paste procedure to achieve a manufacturer's mirror-like surface, then you can rub the needle (entire length) across a bar of dry soap. [2] As you continue to work with your fabric, stick the needle point into the bar of soap occasionally to continue giving it a smooth surface. The soap does not damage the fabric.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do u sharpen syringe
    WikiHow International PM
    Community Answer
    Syringes are a single-use item; you should never try to sharpen a syringe and reuse it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 43 Helpful 17
  • Question
    How do I sharpen a syringe?
    C. M. Yocom
    Community Answer
    Syringes are a single-use item; you should never try to sharpen a syringe and reuse it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 68 Helpful 48
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • The entire needle should be polished using gritty polishing paste to obtain a mirror-like manufacturer's finish on the sharpened point and everywhere else. Any microscopic roughness from sharpening and any corrosion and any rust on the needle will be removed by the polishing paste. A point that has been sharpened using abrasive stone remains microscopically extremely rough until it has been polished to a manufacturer's mirror-like finish using polishing paste.
        Thanks
        Helpful 1 Not Helpful 0
      • Keep an emery board in the sewing basket for quick sharpening access, but only if absolutely necessary though, since the needle's true problem is more likely a microscopically-rough surface that deceivingly masquerades as a blunt point. Test the point against your skin before sharpening it. Any microscopic or visible scratches that are added by necessary or unnecessary grinding will later need to be removed by polishing. Final polishing using polishing paste should be done on a tabletop or countertop.
        Thanks
        Helpful 0 Not Helpful 1
      • It's helpful to sharpen (only if absolutely necessary) and then polish needles to achieve a manufacturer's mirror-like finish everywhere before putting them back so that they are ready for the next time that you need them.
        Thanks
        Helpful 0 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Needle to be sharpened and then polished to a smooth, mirror finish
      • Emery board for fingernails, or very-fine-grit emery paper, or very-fine-grit diamond tool-sharpener
      • Toothpaste containing fine polishing grit, or automobile-paint-polishing paste, or metal-polishing paste for polishing/smoothing the sharpened needle
      • Scrap of cloth, and a rubber glove underneath the cloth to provide an impermeable pad on a countertop for polishing the sharpened needle
      • Soap

      You Might Also Like

      A Simple Guide to Threading a Needle and Tying a Knot
      How to
      Use a Needle Threader
      How to
      Attach Sequins with Glue
      How to
      Use Eyelet Pliers
      How to
      Make a Pincushion
      How to
      Set Up a Sewing Room
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=NPtfwSjft84
      2. ↑ https://sewingmachineclub.com/how-to-sharpen-a-sewing-needle/

      About This Article

      Thanks to all authors for creating a page that has been read 128,198 times.

      Did this article help you?

      Advertisement