Download Article
Repair your bathtub on a budget with this simple step-by-step guide
Download Article
Fixing a chipped bathtub is a do-it-yourself project that can save you from hiring an expensive professional. If you’re repairing small chips or cracks, all you need is an epoxy compound repair kit, a disposable tool to apply it with, and painter’s tape. For minor stains, scratches, or other imperfections, you can refinish your bathtub with a refinishing kit or hire a professional to do the job safely. We interviewed home renovation and repair specialist Art Frick to see how you can repair your tub and make it look like new in just a matter of days!
Things You Should Know
- Buy an epoxy compound bathtub repair kit in your tub’s material and color. Clean the area with a sponge and tub cleaner and apply painter’s tape around the chip.
- Follow the directions in your kit to mix the components. 2-part kits require you to mix both components while 1-part kits just require you to shake the bottle.
- Apply the compound to the chipped area with a disposable paintbrush, plastic knife, or spatula. Let the epoxy dry, then sand the area down until it’s flush.
Steps
-
Buy a bathtub chip repair kit that matches your tub’s color and material. You can either buy a 1-part compound kit or a 2-part compound kit that requires you to mix the two bottles before applying. There are epoxy compound repair kits for all kinds of tub materials, including ceramic, porcelain, fiberglass, and enamel. Most kits come in shades of white, black, or gray to match the most common bathtub colors. [1] X Research source
- Repairing a small chip in your bathtub usually costs $10 to $35 for the entire project.
- Home renovation and repair specialist Art Fricke says that if your tub “has a lot of scratches or is discolored or has a lot of dings and dents,” you may want to get it refinished instead. [2]
X
Expert Source
Art Fricke
Home Renovation & Repair Specialist Expert Interview. 14 August 2020.- Art Fricke also says that a steel or acrylic tub “can't really be sanded and recoated.” You may want to replace it instead. [3]
X
Expert Source
Art Fricke
Home Renovation & Repair Specialist Expert Interview. 14 August 2020.
- Art Fricke also says that a steel or acrylic tub “can't really be sanded and recoated.” You may want to replace it instead. [3]
X
Expert Source
Art Fricke
- If your tub is leaking, overly worn, or cracked, you may have to replace it instead. [4] X Research source
- The repair might not match your tub completely. Sanding it down helps blend out the patch, but you might still see a difference between the tub and the compound.
-
Clean the damaged area and apply painter’s tape around the chip. Use warm water and dish detergent or a household tub cleaner to clean the chipped area. Thoroughly dry the area with a clean lint-free cloth. Use painter’s tape or masking tape to outline the edge of the chip and protect the rest of the area from the epoxy compound. [5] X Research source
- If the chip is on the wall of the tub, apply extra pieces of tape to the area below it to catch any dripping epoxy.
- You can also use acetone or rubbing alcohol to clean the area. Any product that removes grease and soap scum can work to clean the chip.
Advertisement -
Follow the directions in your epoxy kit to mix the components. For 2-part compounds, follow the instructions to mix together both parts on a scrap piece of cardboard or paper until the compound reaches an even color and consistency. [6] X Research source For 1-part compounds, mix the bottle according to the directions—this typically requires shaking the bottle.
- Some 2-part epoxy compound comes in a putty, while others come in a paste. [7] X Research source
- Each kit can make several repairs, so try not to use the compounds all at once.
-
Apply a thin layer of compound with a small paint brush or plastic knife. Scoop up a small amount of the epoxy with your chosen utensil. Spread it in a thin layer over the chip by working in 1 direction and smooth out any spots where it pools. [8] X Research source
- Start with a small amount of epoxy and add more layers so you don’t put too much on, which takes more time to dry and can cause the epoxy to run.
- If the color of the epoxy is slightly off when you put on the first coat, it might be the metal showing through. However, if it seems like the color is way off, stop and order a different color.
- Make sure that anything you use to apply the epoxy is disposable. It can be difficult to get the epoxy off of anything it touches.
-
Let the epoxy dry and sand the area with 400 to 600 grit sandpaper. Follow the directions on your epoxy kit to let it fully dry. Remove the painter’s tape around the chip and spray the area with water. Gently sand the surface with 400- or 600-grit sandpaper until it feels flush with the rest of the tub. [9] X Research source
- Some epoxy compounds set within 2 to 3 hours. Other kits may advise you to wait up to 24 hours before sanding.
- If you can still feel the chip after sanding, apply more compound and repeat this process.
- After you’re done, rinse away any dust from the sanding process or wipe it down with a damp towel and your tub is ready to use!
Advertisement
-
Buy a bathtub refinishing kit at a home improvement center. Most kits come with tub cleaner, sandpaper, primer, refinishing paint, a paint tray, a brush, and a roller. If your kit only comes with paint, you may need to purchase additional supplies. Buy a caulk gun and shower caulk to finish the job. [10] X Research source
- Check that the kit comes with a durable resin coating for your tub. Some cheaper kits come with an epoxy coating, which can chip and discolor faster.
- Refinishing kits can cost from about $30 to $150. The average cost to hire a professional is about $480. [11] X Research source
- Tub refinishing kits work to refinish all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs. The kits will provide a new porcelain-like finish to these kinds of tubs.
-
Remove any tub hardware and scrape off the caulking around the edges. Remove the drain cover, lever plate, spout, and handles with a screwdriver. Use a putty knife to scrape away the caulking from the edges of the tub, and an abrasive pad to scrub away any remaining caulk on the bathtub. [12] X Research source
-
Clean the bathtub with a chemical bathroom cleaner . Use a cloth or sponge to remove any soap scum and stains. If your kit comes with its own cleaner, read the directions on the cleaner to apply it to the tub and use a sponge to scrub it clean. Rinse and dry the tub with a clean cloth. [15] X Research source
- Let the tub completely air dry, or speed up the process with towels and a hair dryer.
-
Ventilate the bathroom, cover the floors, and tape the area around the tub. Open up all the windows and put a box fan in a door or window to ventilate the area. Cover the floors with plastic drop cloths to protect them during the refinishing process. Tape off the edges of the wall surrounding the bathtub with painter’s tape. [16] X Research source
- If your tub is free-standing, slide a plastic sheet or drop cloth under or around the base of the tub to protect the floor.
- If you choose to use a paint sprayer for the tub refinishing process, wrap any objects or surfaces close to the tub with plastic secured with painter’s tape. [17] X Research source
-
Wear protective gloves , a full-face respirator , and goggles . Some DIY refinishing kits may contain harmful paint stripping agents which can be dangerous to use in an enclosed space. In addition, wear long pants, a long-sleeve shirt, and closed-toed shoes to keep your skin safe from potentially harmful chemicals in the refinishing kit. [18] X Research source
- Make sure to read all the directions provided in the refinishing kit and adhere to all the safety instructions. [19] X Research source
- Try to avoid leaning directly into the bathtub—some chemicals are heavier than air, so they can sink into the tub, putting you at risk of injury or death. [20] X Research source
-
Sand the whole tub with the sandpaper or etching powder in your kit. Starting with the lowest-grit sandpaper, sand the whole surface in circular motions by hand or with an electric sander. Work your way up to the highest-grit sandpaper. If your kit comes with etching powder, apply it to the bathtub and use an abrasive pad to dull the finish. [21] X Research source
-
Repair any chips or cracks with an epoxy compound repair kit . Follow the instructions to mix the epoxy. Use a small brush, spatula, or plastic knife to apply thin layers of epoxy to any chips. Wait the instructed amount of time to dry the area and sand the patches down with 2000-grit sandpaper to match the finish of the rest of the tub. [24] X Research source
- This ensures that the tub has no chips or cracks and seals the surface before you apply the new finish.
- Get a component epoxy chip repair kit from the bathroom remodeling or adhesive section of a home improvement store if your kit did not come with it.
-
Rinse the bathtub with water and apply primer with a brush and roller. When the putty is dry and the entire tub is sanded down, rinse the tub with water to remove any dust. [25] X Research source Use a roller to roll the primer onto the large, flat sections of the tub like the floor and sides, then use a brush to get into the corners and curved parts. Let it dry for at least 2 to 3 hours before you start to paint on the new finish. [26] X Research source
- If your refinishing kit only comes with a reglazer, then you don’t need a primer.
- Priming the surface is an important part of ensuring that the new finish adheres correctly so that you end up with the correct texture. Make sure that the primer is completely dry to the touch before you paint over it.
-
Paint the tub with 2 coats of the epoxy reglazer, a brush, and a roller. Use a roller to paint on the new finish until the flat area of the tub is completely covered. Fill in the corners and curves of the tub with the paintbrush. [27] X Research source Let each coat dry for 30 minutes to 1 hour before you put the next coat on.
- Most bathtubs can be refinished with just 2 coats, but if you’re concerned that the layers are too thin, apply a third coat. [28] X Research source
- Depending on the type of kit you purchased, you may need to follow the instructions on your kit to mix the reglazer before applying it to the tub. [29] X Research source
- Some kits may come with a spray-on finish. If you use a sprayer instead of a brush or roller, try to spray evenly and in 1 direction.
-
Let your tub dry for 2 to 3 days, then caulk and reinstall the hardware. Most reglazers take 24 to 48 hours to fully cure, but some may take more than 3 days—consult your kit's directions for the exact drying time. When everything is fully cured, reinstall the drain cover, lever plate, tub spout, and handles. Remove the tape and seal the edges with tub caulk . [30] X Research source
- Home renovation and repair specialist Art Fricke recommends staying away from the house for “a couple days… until [the reglazer is] fully cured and all the nasty chemicals have evaporated out of it.” [31]
X
Expert Source
Art Fricke
Home Renovation & Repair Specialist Expert Interview. 14 August 2020.- If you don't let the finish dry long enough, you could end up with streaks and bubbles in the new coating and may need to start the process over again.
- Move the caulk gun along the edges of the tub slowly to ensure an even bead, then allow the caulk to dry at least 24 hours before you use it. [32] X Research source
- Your new DIY finish can last 10 to 15 years. [33] X Research source
- Home renovation and repair specialist Art Fricke recommends staying away from the house for “a couple days… until [the reglazer is] fully cured and all the nasty chemicals have evaporated out of it.” [31]
X
Expert Source
Art Fricke
Advertisement
Expert Q&A
Search
-
QuestionHow do you fix a chip in a porcelain tub?Art Fricke is a home renovation and repair specialist and the owner of Art Tile & Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a single contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile.If you just have a small, isolated chip, you can get enamel fix from a home improvement store. Just dab a little on, then let it dry. However, keep in mind that you'll probably still be able to see the patch, especially if you're trying to cover a number of chips.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You'll Need
Repairing Small Chips with Epoxy
- Epoxy component chip repair kit
- Sponge
- Soap or household tub and tile cleaner
- Clean cloth
- Small spatula, brush, or plastic knife
- 400 and 600 grit sandpaper
Refinishing Badly-Damaged Tubs
- Bathtub refinishing kit
- Epoxy component chip repair kit
- 400 and 600 grit sandpaper (if not included in kit)
- Paint brush and roller (if not included in kit)
- Small spatula, brush, or matchstick
- Chemical bathroom cleaner
- Full-face respirator
- Goggles
- Disposable gloves
- Box fan
- Heavy-duty plastic drop cloths
- Painter's tape
- Tub and tile caulk
Tips
- If you’re not sure how to refinish your bathtub on your own, it may be best to hire a professional instead. [34] X Research sourceThanks
- Wear protective clothing, goggles, gloves, and a full-face respirator while refinishing a tub to protect yourself from potentially dangerous chemicals. [35] X Research sourceThanks
- Try to avoid using paint primer on the bathtub—only use the primer included in a bathtub refinishing kit. [36] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.familyhandyman.com/plumbing/how-to-fix-a-chipped-sink/view-all/
- ↑ Art Fricke. Home Renovation & Repair Specialist. Expert Interview. 14 August 2020.
- ↑ Art Fricke. Home Renovation & Repair Specialist. Expert Interview. 14 August 2020.
- ↑ https://www.bhg.com/bathroom/shower-bath/replace-a-bathtub/
- ↑ https://www.idealhome.co.uk/diy/how-to-repair-a-chip-in-bath
- ↑ https://youtu.be/g7v8ClKDRCM?t=145
- ↑ https://www.housedigest.com/996941/how-to-repair-a-chipped-porcelain-bathtub-yourself/
- ↑ https://www.familyhandyman.com/plumbing/how-to-fix-a-chipped-sink/view-all/
- ↑ https://www.housebeautiful.com/uk/renovate/diy/advice/a904/bath-repair-fix-chipped-bathtub/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.forbes.com/home-improvement/bathroom/bathtub-refinishing-cost/
- ↑ https://www.bhg.com/bathroom/shower-bath/bathtub-refinishing-tips/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.architecturaldigest.com/story/bathtub-refinishing
- ↑ https://www.bhg.com/bathroom/shower-bath/bathtub-refinishing-tips/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://blogs.cdc.gov/niosh-science-blog/2013/02/04/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/how-to-paint-a-bathtub/
- ↑ https://www.architecturaldigest.com/story/bathtub-refinishing
- ↑ https://www.architecturaldigest.com/story/bathtub-refinishing
- ↑ https://www.homeadvisor.com/cost/bathrooms/refinish-a-bathtub/
- ↑ https://www.architecturaldigest.com/story/bathtub-refinishing
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ Art Fricke. Home Renovation & Repair Specialist. Expert Interview. 14 August 2020.
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
- ↑ https://www.bhg.com/bathroom/shower-bath/bathtub-refinishing-tips/
- ↑ https://www.forbes.com/home-improvement/bathroom/bathtub-refinishing-cost/
- ↑ https://blogs.cdc.gov/niosh-science-blog/2013/02/04/bathtub-refinishing/
- ↑ https://www.bobvila.com/articles/bathtub-refinishing/
About This Article
Article Summary
X
If you have a small chip in your bathtub, you can fix it with an epoxy kit. Before you start, scrub the damaged area of your tub clean with a sponge and some soap and water. Follow the directions on your epoxy kit for mixing the 2 components together. Once they’re mixed, use a small spatula or a paintbrush to spread a thin layer of the epoxy over the chip. Wait for it to fully dry, which should take at least 2-3 hours, then use sandpaper to buff out the dried epoxy until its smooth. If your bathtub is badly damaged, you can use a bathtub refinishing kit to restore the finish. You’ll need to sand the whole tub to remove the old finish, repair all the cracks with epoxy, then paint on new primer and finish. To learn how to prevent paint from getting on you tile, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 135,993 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
