PDF download Download Article PDF download Download Article

It’s sure to happen. Someone sets a glass on a wooden tabletop. Before you can slip a coaster underneath it, a ring appears on the wood. Before you spend a fortune in refinishing costs, you can learn a few inexpensive options to get stains out of wood.

Method 1
Method 1 of 2:

Quick & Easy Solutions

PDF download Download Article
  1. Baking soda is a great cleaning agent. To get rid of the dye, mix baking soda with distilled vinegar or lemon juice. Make a paste that is the consistency of toothpaste. Spread it over the stain. Use a sponge to gently rub it into the wood. When you're finished, wipe the paste from area. When you're finished, rinse with a rag and plain water. [1]
    • You can use your fingers instead of a sponge.
    • Add some more vinegar or water if the stain is being stubborn.
    • Repeat the process until the stain is removed.
    • You can also try a magic eraser to remove dye.
  2. For food and nail polish stains, try using dish detergent. Mix the soap in warm water, soak a rag in the solution, and then rub over the spot.
    • This method works best with non-greasy stains.
    Advertisement
  3. For greasy stains on wood, try using a little bit of ammonia mixed with cold water. Cover a rag with the solution, and then gently rub over the stain. [2]
  4. When pets mess on wood floors, bacteria must be removed. Bacteria causes stains and odor. To remove stains and bacteria, use a 5 percent phenol solution, which can be bought at hardware and home improvement stores. Clean the area by using a damp, soft cloth.
    • If your floor has a wax finish, use fine steel wool and mineral spirits to clean the area. Clean the area in a circular motion. Wax and buff the area afterwards. [3]
  5. Place a small amount of isopropyl alcohol onto a rag. Gently rub the stain to remove it. Wipe off with a damp rag afterwards to rinse.
    • Test on the underside of your table first to make sure it doesn't damage the table.
    • Try toothpaste on the permanent marker stain, too. [4]
  6. Use Oxalic Acid, which is found in wood bleach and some household cleaners. You can buy it at home improvement stores and some grocery stores. First, you need to strip the area with the stain of the finish so you can treat it. [5]
    • Mix the Oxalic Acid mixture with water to make a thick paste. Make sure not to do this in a metal bowl since Oxalic Acid can cause discoloration in metal. Apply to the stain with a rag or disposable paint brush. Let it sit until it dries. Add multiple applications. [6] Rinse the area between the applications. [7]
    • If the bleach doesn't remove it, the stain may be from something else, like food or wine. Try hydrogen peroxide or household bleach then.
    • Refinish the spot. Don't refinish the whole piece unless you have to.
    • Black stains are water stains that have penetrated deeper into the wood. They are much harder to get rid of. [8]
  7. Advertisement
Method 2
Method 2 of 2:

Removing White Rings

PDF download Download Article
  1. Empty the iron of all water. Lay a towel, t-shirt, or other cloth over the stain. This acts a barrier between the table and the iron. Turn the iron to low and rub it slowly over the fabric for a short period of time. Then lift the cloth to see if the stain has disappeared. If it hasn't, replace the cloth and repeat. [9]
    • Make sure the iron is set to no steam.
    • Act as quickly as possible. Dry as much of the table surface as you can before you begin.
    • Wipe away any moisture or water on the surface each time you remove the iron. [10]
    • White rings are caused by steam or liquid. The white color means they have only penetrated the wax or finish, which means they will be much easier to clean than a darker stain. [11]
  2. Buy a fine steel wool pad. Soak the pad in lemon oil. Very gently, rub the wool over the white ring. Then, rub over the stain with a cloth dabbed with denatured alcohol. [12]
    • The lemon oil is a lubricant and helps prevent the wood from scratching.
  3. Place toothpaste on your finger or a cloth. Rub the toothpaste with the grain of the wood until it heats. Dampen a cloth with water and then wipe away the toothpaste. Dry the water. [13]
    • Make sure the toothpaste you use is white and non-gel. [14]
    • You don't need a lot of toothpaste. Just a small dab will work.
    • Don't scrub too long. Try not to scrub outside of the stain area. This might wear the finish and top layer of wood. [15]
    • Repeat until the stains are gone.
  4. Take a blow dryer and turn it on high. Hold it close to the stain. The stain should start disappearing as the dryer dries the moisture. Make sure to move the dryer back and forth over the area. [16]
    • This will probably take 10-30 minutes.
    • Put a little olive oil on the wood afterwards to moisturize it.
  5. Products with oil, like mayonnaise, butter, and petroleum jelly, help seep into the wood and break up the moisture. [17] Place the mayonnaise or petroleum jelly on the stain. Leave for an hour up to overnight.
    • Make sure to put more mayonnaise on the stain if it dries out.
    • To add some abrasive stain removing power, mix cigarette ashes with the mayonnaise or petroleum jelly. [18]
  6. Mix baking soda with either toothpaste or water to remove the stain. If using water, mix 2 parts baking soda with 1 part water. Use a rag to gently scrub the stain. [19]
    • If using baking soda with toothpaste, mix equal parts together. Rub over the stain with a rag. Rinse with a damp cloth afterwards. [20]
  7. Advertisement

Video

Community Q&A

Search
Add New Question
  • Question
    People rest their bare feet on my wooden coffee table, and it is staining the wood. How can I get the marks out?
    Community Answer
    Put 1 tbsp disinfectant in a basin of hot soapy water, and scrub gently with an all-purpose sponge (not a scourer).
  • Question
    How can I get citrus stains out of white-painted wood?
    Community Answer
    Painting over it would be best. If that is not an option, try using a Mr Clean eraser.
  • Question
    How do I get rid off sellotape or scotch tape on a wooden cabinet?
    Community Answer
    Gently rub some non-gel toothpaste on the wood with a soft cloth. Then wipe it off with a damp cloth and let it dry before applying furniture polish. For even stronger cleaning power, mix equal parts white toothpaste and baking soda.
See more answers
Ask a Question
      Advertisement

      Reader Videos

      Tips

      • Test any of these methods on a section of the wood not visible before attempting to remove the stain. Depending on your type of wood, it might damage it further.
      • If the black stain has gone deep enough, you may have to strip the varnish. You also might have to strip it to remove it and then refinish it.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      About This Article

      Article Summary X

      To remove white rings from a wooden table, put a towel on the table and go over it with an empty iron. Remove the iron, wipe away any moisture, and repeat if necessary. Alternatively, gently rub the area with a fine steel wool pad soaked in lemon oil before dabbing the wood with a cloth and denatured alcohol. Another option you can try is to heat the area with a hairdryer on high for between 10 and 30 minutes. For food or nail polish stains, mix dish detergent with warm water and wipe the area with a cloth. To learn how to remove dye stains or greasy stains, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 564,997 times.

      Reader Success Stories

      • Kirsten Dye

        Sep 18, 2016

        "The suggestion to use a magic eraser worked on removing a red dye stain on my furniture this evening!"
      Share your story

      Did this article help you?

      Advertisement