Download Article
Download Article
If you like a tree's fruit and want more of it, your best option may be grafting. This is the only way to guarantee the fruit will come out the same. There are various ways to graft, but with practice and these instructions, you can master the technique that's best for you.
Steps
-
Choose your cultivar and your rootstock. In order for your budding to be successful, you must cut a scion (small piece for grafting) from a healthy, disease-free cultivar (origin tree) as well as a suitable growing tree (rootstock). The rootstock in this case is an established tree that the scion can be spliced into. For T-budding, the bark of both trees must be "slipping." This means the bark is easily peeled off and the green layer underneath is moist, which usually occurs in the spring. Try irrigating them well to help them along. [1] X Trustworthy Source Royal Horticultural Society Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants Go to source
- T-Budding is typically used for fruit tree propagation.
-
Cut a scion. For T-budding, you must cut into the branch 1 ⁄ 2 inch (1.3 cm) below the bud to 3 ⁄ 4 inch (1.9 cm) beyond the bud. Make the cut as deep as needed to include the soft, green layer beneath the bark but not any deeper. This green material must be exposed on your scion for a successful graft. If you must store your scion bud, wrap it in a damp paper towel, place it in a polyethylene bag, and store it in a refrigerator. [2] X Trustworthy Source University of Kentucky College of Agriculture, Food, and Environment Program in the University of Kentucky devoted to scientific research and public education Go to sourceAdvertisement
-
Make a T-cut on your rootstock. Choose a space on a branch or sapling that is 1 ⁄ 4 inch (0.6 cm) to 1 inch (2.5 cm) in diameter. The space must be free of any buds, ideally far from any buds. Make a vertical slice in the bark about 1 inch (2.5 cm) long and deep enough to expose that green layer. Make a horizontal slice of the same depth that is about one third the distance around the rootstock. Twist the knife in the juncture of the slices to create flaps of the bark, making the green layer visible. [3] X Trustworthy Source Royal Horticultural Society Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants Go to source
-
Introduce the scion. Slip the scion containing the bud under the flaps you've just created on the rootstock, taking care not to introduce any dirt or germs. If part of the scion's bark sticks out above the T-cut, slice it off so that everything fits together snugly. [4] X Research source
-
Tie the scion to the rootstock. Wrap a stretchy rubber material such as grafting rubber around the rootstock to hold the scion in place. Be careful not to jostle or cover the bud. [5] X Research source
-
Remove the tie. In about a month, the rubber you wrapped around the rootstock may loosen and fall off. If it doesn't, gently remove it yourself so that the area will not be constricted.
-
Follow up on your bud. If the bud looks plump and healthy, it is probably alive. If it looks shriveled, then it has died and you'll have to start again.
-
Remove other material. The next spring, once the bud has begun to sprout leaves, make a sloped cut 1 ⁄ 2 inch (1.3 cm) above the successful bud. Remove all other side shoots below the bud. This will promote growth of the grafted bud since it will be the only thing being nourished by the rootstock.
Advertisement
-
Choose your cultivar and your rootstock. In chip budding, the diameters of the scion and the rootstock should be the same diameter. If they're not, you'll have to cut them differently so that the green layers match up when combined.
- Chip Budding is one of the easiest ways to graft, and is particularly good for fruit trees.
-
Cut a slice from your rootstock. Make a small angled cut about 1/5 to 1/4 the rootstock's diameter into the rootstock. Slice your knife downward at this depth for 1 1 ⁄ 4 to 1 1 ⁄ 2 inches (3.2 to 3.8 cm). Remove your knife without severing the bark. Move the knife upward a small amount and then cut back in and downward to meet the end of the initial slice to create a small notch. Remove the chunk of bark from the rootstock.
-
Cut a scion from your cultivar. Use the chunk cut from your rootstock as the model for your scion, using the scion bud as the center point of the new cutting. You want the scion to fit into the space made in the rootstock as neatly as possible.
-
Introduce the scion to the rootstock. Slip the scion down into the notch at the bottom of the rootstock cut. Make sure that the green layers of the scion and rootstock are touching all the way around the edges. If they are not, the graft will fail. [6] X Trustworthy Source Royal Horticultural Society Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants Go to source
-
Secure the scion. Wrap a stretchy rubber material around the rootstock to hold the scion in place. Polyethylene tape is preferable. Be careful not to jostle or cover the bud.
- Some of the specifics of this process will depend on what kind of tree you are growing and what kind of material you're using. For example, if you use grafting tape and grafting an apple tree, you had better cover the whole thing with the tape, as the tape will protect the bud from drying, and it will be torn by the bud as it grows. But other materials may not give the same protection, and may be more difficult to tear. Large buds are difficult to fully cover, and can be exposed to air. It depends on the fruit.
-
Remove the tie. In about a month, the rubber you wrapped around the rootstock may loosen and fall off. If it doesn't, gently remove it yourself so that the area will not be constricted.
-
Follow up on your bud. If the bud looks plump and healthy, it is probably alive. If it looks shriveled, then it has died and you'll have to start again.
-
Remove other material. The next spring, once the bud has begun to sprout leaves, make a sloped cut 1 ⁄ 2 inch (1.3 cm) above the successful bud. Remove all other growth below the bud to promote growth through the grafted bud.
Advertisement
-
Choose your cultivar and your rootstock. Whip grafting can only be used to join rootstock and scions that are the same diameter, ideally between 1/4 and 1/2 inch in diameter.
- The graft must be made after the threat of cold but before the bark of the stock begins slipping (peels off easily).
- The scion must be dormant (not sprouting) at this time, and should be a twig about a foot long containing three to five buds.
-
Prepare the scion. Remove the terminal end of the scion. At the base of the scion, make a sloping cut to remove that end.
-
Prepare the rootstock. Make a sloping cut across the chosen branch that mirrors the one you made on the scion. They should fit together precisely.
-
Cut tongues. Make matching slices down into both the rootstock and the scion in such a way that they can hook into each other.
-
Introduce the scion. Place the scion slightly offset from the rootstock and slide it down so that the tongues overlap. Make sure that the layer of green wood beneath the bark of both parties aligns or the graft will not take. [7] X Trustworthy Source Royal Horticultural Society Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants Go to source
-
Secure the scion. Wrap a stretchy rubber material around the graft site to hold the scion in place. Grafting tape works well. If using a different material, be sure to remove it in about a month.
-
Look after the graft. Once the graft is planted, keep an eye out for new growth below the graft, as you may need to remove it. At first, you can leave some leaves on the rootstock so that nutrients keep flowing up the tree until the graft is successful. However, if you see an actual young branch/shoot forming on the trunk of the rootstock, remove it; this will help encourage the scion to grow.
- Once the scion really starts to grow and a few new leaves appear above the graft (5 or so healthy leaves), remove any further growths from the rootstock, below the graft. This removal will help the plant thrive with growth on the scion, rather than the rootstock, and has to be done as long as the tree is alive. Otherwise, the rootstock will try to make its own branches; you'll need to remove them whenever they grow.
Advertisement
-
Choose your cultivar and your rootstock. Scions should be up to three dormant, or not currently sprouting, twigs of about a foot long containing three to five buds. Don't cut scion and rootstock at the same time.
- Rootstock should be straight, smooth, vertical branches 1–2 inches (2.5–5.1 cm) in diameter.
- Bark grafts should be performed once the rootstock bark has begun slipping (when the bark is easily peeled off in spring).
- This graft is usually used for instances in which the rootstock is too big for whip grafting.
-
Amputate the rootstock. Above a crotch out of which several branches grow, cut straight across one branch with a very sharp saw so as not to crack or rip the bark or wood of the branch. Make sure you leave a branch nearby to keep nutrients moving up the tree.
-
Prepare the scions. Cut the scions down to around 5 inches (12.7 cm) in length while still retaining about 5 buds per scion. Around three inches from the base of the scion, make a sloping cut inward until you reach the base.
-
Prepare the rootstock. Hold each scion up against the rootstock so that about 1 ⁄ 8 inch (0.3 cm) of the cut surface of the scion shows above the rootstock. With a sharp knife, outline each scion on the rootstock. Remove the scions and finish cutting away this bark so that each will fit snugly into its space.
-
Introduce the scions. Place each scion in its space on the rootstock, taking special care to ensure the green wood of both parties aligns exactly. Once in place, hammer two wire nails into each scion to hold them into the tree.
-
Seal the graft. Pour grafting wax or asphalt water emulsion over the area to seal all cut surfaces from drying and bacteria. Check the seal again the next day to make sure no holes have formed.
-
Look after the graft. Keep removing all growth below the graft. Once one scion shows more promise than the other(s), leave that one as is while pruning the less successful graft(s). Two summers after grafting, remove all but the strongest scion.
Advertisement
-
Choose your cultivar and your rootstock. Scions should be two dormant, or not currently sprouting, twig of about a foot long containing three to five buds.
- Rootstock should be straight, smooth, vertical branches 1–2 inches (2.5–5.1 cm) in diameter.
- Cleft grafts should be performed right before the bark of the rootstock starts slipping (being easily peeled off) in spring.
- This graft is usually used for top working (changing the type of fruit) of a mature tree by being performed on a number of branches.
-
Amputate your rootstock. Choose a point below which the branch is straight and blemish-free for six inches and then make a clean perpendicular cut, removing the rest of the branch. Be careful not to tear or split the branch or bark. Be sure to leave a branch that has sprouted nearby to keep nutrients moving up the tree.
-
Cleave your rootstock. Use a cleft-graft knife or a hatchet to split the branch straight down the center for about 6 inches (15.2 cm).
-
Prepare the scions. Remove the tip and the base of the scion. Beginning just below the bottom bud, make a sloping cut on either side of the scion that reaches all the way to the bottom.
-
Insert the scions into the rootstock. Using a large screwdriver or small chisel to hold open the cleft in the rootstock, insert a scion into either side of the cleft. Make sure once again that the green layer of the wood, not the bark , is aligned. No cut surface on the scion should be visible above the top of the rootstock.
-
Seal the graft. Pour grafting wax or asphalt water emulsion over the area to seal all cut surfaces from drying and germs. Check the seal again the next day to make sure no holes have become exposed.
-
Look after the graft. Keep removing all growth below the graft. Once one scion shows more promise than the other, leave that one as is while pruning the less successful graft. Two summers after grafting, remove all but the strongest scion.
Advertisement
Expert Q&A
Search
-
QuestionWhen is the best time to graft peach trees?Andrew Carberry is a Food Systems Expert and the Senior Program Associate at the Wallace Center at Winrock International in Little Rock, Arkansas. He has worked in food systems since 2008 and has experience working on farm-to-school projects, food safety programs, and working with local and state coalitions in Arkansas. He is a graduate of the College of William and Mary and holds a Masters degree in public health and nutrition from the University of Tennessee.The best time to graft peach trees is during the Spring, when the bark is 'slipping'.
-
QuestionCan I graft a peach cutting to a plum tree?Community AnswerYou can make a tongue and groove graft to connect most types of closely related trees to the base of a more productive rootstock ( in your case, both are stone fruits). Do it while they are dormant. You may also take a budwood graft which has a higher success rate and is much easier. I graft apples in New York and have 2 trees with over 6 varieties of apples between the two - all done with budwood.
-
QuestionCan I graft a grapefruit on my olive trunk?Community AnswerTrees need to be compatible and of the same kind. You can graft a grapefruit on a citrus tree, orange or lemon tree, etc.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- T-budding is the easiest and most common method of budding, but inverted T-budding (completing the process entirely upside-down) produces stronger results. Chip budding is the most difficult, but produces the best grafts.Thanks
- Use very sharp tools to make a clean cut and clean them with rubbing alcohol to remove germs before use.Thanks
- Use aluminum labels to mark the variety, or cultivar, you grafted. This is especially useful if you graft more than one variety onto a tree.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be sure your trees are all able to survive in your climate.Thanks
- You must pay the propagation fee at a nursery that holds the license of a patented cultivar to avoid legal action by the Nursery Licensing Association. These fees are usually small.Thanks
Advertisement
Things You'll Need
- Sharp cutting instrument
- Rootstock
- Scions
- Tying material such as budding rubber or polyethylene tape
- Sealant such as grafting wax or asphalt water emulsion
- Cleaving instruments such as a hatchet and large screwdriver
References
- ↑ https://www.rhs.org.uk/advice/profile?pid=443
- ↑ http://www2.ca.uky.edu/agc/pubs/ho/ho39/ho39.pdf
- ↑ https://www.rhs.org.uk/advice/profile?pid=399
- ↑ http://www.fruitmentor.com/grafting-orange-trees-t-bud
- ↑ http://www.fruitmentor.com/grafting-orange-trees-t-bud
- ↑ https://www.rhs.org.uk/advice/profile?pid=400
- ↑ https://www.rhs.org.uk/advice/profile?pid=443
About This Article
Article Summary
X
To graft a tree, start by cutting a bud off of a healthy tree that has peelable bark that's green and moist underneath. Then, make a "T" shaped cut on the tree you want to graft onto and slip the bud into the flaps of bark you cut. Wrap some grafting rubber around the tree to hold the bud in place and leave it for a month. After a month, remove the grafting rubber and check on the bud, which should look plump and healthy. To learn other ways you can graft a tree, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 615,265 times.
Reader Success Stories
- "I was looking for the best way to graft a tree that was damaged by a storm. This article provided five different methods that allowed me to pick the one that I think will work best for my tree. Great article!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I was looking for the best way to graft a tree that was damaged by a storm. This article provided five different methods that allowed me to pick the one that I think will work best for my tree. Great article!"
..."
more
"Very useful for me as I am reading this kind of technique for the first time. The article gave me a lot of knowledge, thanks."
..."
more
"After reading this, I feel that my home grafting is going to improve my rose garden and my small orchard. Thank you. "
..."
more
"Great to get help fast, efficient and to the point with diagrams to assist with different ways of grafting."
"Your explanation of grafting is so well prepared that even novice gardeners can understand the context."
