Download Article
Download Article
Hammered copper can be an accent to tables, sinks, artistic projects or other various household items. Purchasing hammered copper from a third party, however, can be a very expensive undertaking. Read the following article to learn how to hammer copper at home for a fraction of the cost.
Steps
Download Article
-
Purchase a copper sheet appropriate to the specifications of your job.
- Get approximately 2 feet (about 61 cm) more copper sheeting than you need for the job. Allow 1 foot (about 30.5 cm) on each side. It will shrink with extensive hammering, and you'll need the excess on the ends for hammering in nails.
-
Choose a soft temper of copper sheet to allow you to hammer copper more easily. It can also be shaped by hand, if necessary.Advertisement
-
Select a copper sheet that is as thin as possible but still works for your job.
- The thinner the copper sheeting, the easier it will accept the indentations of your hammer. For ease of hammering, choose a 24-gauge thickness for your copper sheeting. This can also be called 16 oz. or .021 inches (about .05 cm).
-
Purchase a piece of plywood that is as long and wide as your copper sheeting.
-
Put on protective gloves to prevent cuts and protect your hands from any pieces of copper that may dislodge while hammering.
-
Unroll the copper sheeting onto the plywood.
-
Put on protective eyewear when hammering copper.
- This protects your eyes from any stray shards of copper that may dislodge while indenting copper.
-
Hammer a nail into both ends of the copper sheet and into the plywood.
- This will secure your copper sheeting in place while you are hamming the copper.
- You want the copper sheeting to be as flat and flush against the plywood as possible. This will give you the most control over your ability to hammer and indent the copper sheeting.
-
Place a towel over the portion of copper you're about to hammer.
-
Use a ball peen hammer to create the indentations. [1] X Research source
-
Hammer softly, letting the weight of the hammer create the indentations in the copper.
-
Indenting copper will not be difficult with a thin and soft enough sheet of copper. To avoid making too drastic of indentations in your copper sheeting, start soft and gradually apply greater and greater force until you've created the desired pattern. [2] X Research source
-
Hammer the copper sheeting with varying forces and patterns until the desired effect is achieved. [3] X Research source
Advertisement
Community Q&A
Search
-
QuestionCan I use copper pennies to create a sheet?Community AnswerNot easily. It would require melting and casting or possibly some kind of welding.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you choose to indent your copper with something other than a ball peen hammer, apply very light pressure. Overt force could rip or tear a hole in your copper sheeting.Thanks
- If the material you're using to support your copper has a pattern or texture, it will be embossed onto the back of your copper sheeting. Use concrete for a distressed, aged look.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Never use a product to support your copper sheeting that is in any way breakable or fragile. These prohibited materials could include glass, porcelain or ceramic.Thanks
- Hammering copper can be tiring work. Take a break so you don't injure yourself or compromise the overall design of the copper sheeting.Thanks
Advertisement
Things You'll Need
- Protective eyewear
- Protective gloves
- Copper sheeting
- Ball peen hammer
- Nails
- Plywood
- Towel
References
About This Article
Thanks to all authors for creating a page that has been read 85,801 times.
Reader Success Stories
- "It helps me in preparing DPR on copper products. It gives me a lot of information to prepare my project."
Advertisement
91%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It helps me in preparing DPR on copper products. It gives me a lot of information to prepare my project."
