How to Hang Voile and Curtains Together

PDF download Download Article
PDF download Download Article

Hanging voile along with curtains is a simple way to add depth to your window treatments while also allowing more light to shine through. Also, if you want privacy without having to make your room dark, voile provides a sheer barrier between you and the outside world.

Method 1
Method 1 of 3:

Using a Double Curtain Rod

PDF download Download Article
  1. These kits come with 2 curtain rods and curtain rod holders with brackets to hang the second curtain. A double curtain rod will allow the curtains and voile to hang at the same length without having to measure multiple holders. A double curtain rod makes hanging a curtain and sheer voile easier. [1]
    • Choose decorative rods if you want the rods to add flair to the overall window treatment.
    • If you don’t want the rods showing, choose concealed rods.
    • Measure your windows first to make sure you get a rod that's the the right length.
  2. Add 6 in (15 cm) to 12 in (30 cm) from the top of your window. Make a mark on either end of the window based on these measurements. Then, measure from this mark to where you want the curtains to end on the floor. [2]
    • For a traditional look, have the curtains stop just above the floor or touch the floor.
    • If you prefer a luxurious look, consider having curtains long enough to puddle on the floor.
    Advertisement
  3. The width of your curtain should be bigger than the window. Include the window frame on each side when you measure the width. Add 10 in (25 cm) to either side of the window frame to create a balanced look.
  4. Follow the manufacturer’s instructions to make sure you attach the correct pieces to the wall and the correct brackets to each holder. Use the marks you made to screw the curtain rod holders into the wall with a screwdriver and screws.
  5. Put the curtains onto 1 rod and the voile onto the other rod. [3]
    • If the curtains have holes or several loops, you can choose to skip a hole or 2 to make fewer pleats in the curtain.
  6. The rod with the voile will go on the brackets closest to the window. The rod with the curtains will go on the bracket towards the front.
    7. Advertisement
Method 2
Method 2 of 3:

Using a Single Curtain Rod

PDF download Download Article
  1. Measure the width of the window and add 10 in (25 cm) to either side. Measure the length of the curtain you want by adding 6 in (15 cm) to 12 in (30 cm) from the top of your window. Make a mark on either end of the window based on these measurements. Then, measure from this mark to where you want the curtains to end. [4]
  2. Choose a decorative rod if you would like it to be visible. If you want the to be rod out of site, choose a concealed rod. Purchase a curtain rod that fits the measurements you have made.
    • Using an adjustable curtain rod will allow you to make sure the the rod fits your measurements.
  3. Hang the curtain rod and curtains using the instructions on the label. You will usually be told to use a screwdriver and screws to attach the curtain rod holder to the wall. Then thread the curtains onto the curtain rod.
  4. Use a bungee cord that has a hook on either end. Thread the voile through the bungee cord. Hook either end of the bungee cord to the curtain rod holders.
    • Opt for a light-colored (white, gray, beige) bungee cord so it won’t show through the sheer voile once it is hung.
  5. Find a tension rod that is thin enough to fit through the loops in the voile. Thread the voile through the tension rod.
    6. Advertisement
Method 3
Method 3 of 3:

Hanging Without Curtain Rod Holders

PDF download Download Article
  1. You can find these items at a home improvement store or bed and bath store. The rod and rod endings will usually be sold together. Use lightweight rods that are adjustable.
    • To add a personal touch, paint the wall hooks and pole endings using spray paint.
  2. Measure how far you want the curtain above the window by adding 6 in (15 cm) to 12 in (30 cm) from the top of your window. Make a mark on either end of the window based on these measurements.
  3. Follow the label's instructions to expose the adhesive and stick it to the wall. These hooks will hold the rod with the curtains.
  4. Place the a hook below and to the right of where you placed the first left hook. Place the last hook below and to the left of the first right hook. [5]
    • These two hooks will be used to hang the curtain with the voile.
  5. Thread the curtains and voile through the curtain rods. Place the rod with the voile on the bottom two hooks and the rod with the curtains on the top two hooks.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you whiten voile curtains?
    Kanika Khurana
    Interior Designer
    Kanika Khurana is an Interior Designer and the Owner of Kanika Design. With over 12 years of experience, Kanika specializes in remodeling, refurnishing, and color consulting. Kanika holds a Bachelor’s Degree in Psychology from San Francisco State University, a Redesign and Home Staging Certification, and an Associate Degree in Business Administration from Cañada College.
    Kanika Khurana
    Interior Designer
    Expert Answer
    If the fabric is washable, wash it. When in doubt, get the curtains dry cleaned. My real tip, though, is to not leave them hanging for years between cleanings, or they will get really dirty.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      Using a Double Curtain Rod

      • Double curtain rod kit
      • Measuring tape
      • Screwdriver
      • Screws

      Using a Single Curtain Rod

      • Single curtain rod kit
      • Measuring tape
      • Screwdriver
      • Screws
      • Bungee cord, optional
      • Tension rod, optional

      Hanging Without Curtain Rod Holders

      • Adhesive wall hooks
      • 2 curtain rods
      • Measuring tape

      You Might Also Like

      How to
      Hang a Curtain Rod: An Easy DIY Guide
      How to
      Hang Curtains
      How to
      Hang Curtains with Drapery Hooks & Curtain Rings
      2 Ways to Hang a Ceiling-Mount Curtain Rod (With or Without Drilling)
      How to
      Hang Curtains over Vertical Blinds
      How to
      Hang Pinch Pleat Curtains
      How to
      Hang Eyelet Curtains
      How to
      Hang Curtains in a Bay Window
      How to
      Hang a Curtain Swag
      How to
      Hang Blackout Curtains
      How to
      Divide a Room with Curtains
      How to
      Choose a Curtain Rod for Your Window Decor
      Advertisement

      References

      1. ↑ https://homesteady.com/how-12002175-install-sheer-curtains-regular-curtains.html
      2. ↑ https://stylebyemilyhenderson.com/blog/hanging-curtains-all-wrong
      3. ↑ https://homesteady.com/how-12002175-install-sheer-curtains-regular-curtains.html
      4. ↑ https://stylebyemilyhenderson.com/blog/hanging-curtains-all-wrong
      5. ↑ https://stylebyemilyhenderson.com/blog/hanging-curtains-all-wrong

      About This Article

      Thanks to all authors for creating a page that has been read 52,701 times.

      Did this article help you?

      Advertisement