Download Article
Download Article
Identifying steel is simple once you know the metal’s characteristics. Steel is both stronger and heavier than most metals. If you cannot tell what kind of metal you have by looking at it, test it by chipping or filing off a piece. Alternatively, use a grind wheel to perform a spark test. Once you know what to look for, you will be able to easily identify steel.
Steps
-
Check the metal for a number label. Inspect the surface of the metal first. If the metal has a number code printed on it, that may mean it is steel. This code may also be printed on the container or wrapping that protects the steel during shipping. If you don’t have that available, you will have to identify the metal through other means.- One code system is the AES system. It’s a 4-digit code where the first 2 numbers indicate the type of steel. Search online to find an identification chart that explains what these numbers mean. [1] X Research source
- The ASTM system is used on rebar. The first number in the code represents the size of the bar, while the letter under it indicates the type of steel. [2] X Research source
-
Look for metal that is dark brown, shiny silver, or red with rust. Steel comes in a small range of colors, but you can still get a sense of what metal you have by looking at it. Carbon steel, used in pipes and buildings, is a dark brown color. Stainless steel, used in kitchens, is silver and shiny. In addition, reddish rust spots are an indication that the metal is steel. [3] X Research source- Stainless steel is a hard metal that typically won't get corroded or damaged.
- Metal that has a red or yellow tint is copper or brass, not steel. Copper may also turn green as it ages.
Advertisement -
Chip the metal to look for a silver coloring inside. Before attempting a chip test, look for any fractures. These spots usually give you a view of the inside of the metal. Otherwise, use a hammer and chisel to break off a small piece. Steel’s inner portion is always bright gray. [4] X Research source- Hold the metal in place with clamps or vice grips before attempting to chip it.
Advertisement
-
Make sure the metal is magnetic. If you are still uncertain, press a small magnet against the metal. Steel is generally magnetic because it is made of iron. Most other common metals, including aluminum, aren't magnetic. If the magnet sticks, the metal is most likely steel. [5] X Research source- Other magnetic metals are either rare or not used in pure forms. Cobalt and nickel, for example, are often components in steel.
- Some stainless steel is not magnetic. When nickel is added during manufacturing, the magnetism fades. Identify this metal by color, by weight, or by trying another test.
-
Look for a heavier metal rather than a lighter one. Aluminum and stainless steel are both shiny and silver-colored, so they look similar. Distinguish between them by handling the metal. Stainless steel feels much heavier than aluminum. Steel feels stronger, more solid, and less prone to breaking in your hands.- To get used to the differences between these metals, compare household objects. For example, an aluminum can feels much different than a steel cup or utensil.
-
Test the hardness by filing the metal. Use a metal file to perform a file test. Lay the metal on a flat surface and rub the file against 1 end. Steel is a relatively hard metal, so filing off fragments should take some work. Depending on the file’s hardness, you may not even be able to wear off any of the metal this way. Look up the Moh’s scale for metals to compare hardness ratings. [6] X Research source- In contrast, lead, aluminum, silver, and many other metals are softer than steel. Wearing them down with the file is easier.
- Hardened steel, which has a medium to high carbon content, is stronger than all but a few metals. Most metal files won’t affect it.
Advertisement
-
Wear goggles and other safety gear. Take safety precautions before using a grinding wheel. Polycarbonate safety goggles protect your eyes from stray sparks and metal fragments. Also put on ear muffs to block out the machine’s noise and a respirator to avoid breathing in dust.- Steel-toed boots are also a good idea. Wear these in case you drop a heavy piece of metal.
-
Turn on a bench grinder. To test the metal, you need some sort of spinning wheel. The faster it rotates, the more sparks it will produce. Get a bench grinder or handheld grinder with a 24-grit carborundum wheel and wait for it to spin up to speed. [7] X Research source -
Hold the metal flat when pressing it against the wheel. Hold the ends of the metal in your hands directly in front of you. Keep a firm grip on the metal as you lower it onto the wheel. The contact produces sparks, which you should be able to see without moving your head. [8] X Research source- Adjust the metal’s position until you get a clear view of the spark pattern.
-
Note if the sparks branch out in a pattern. Maintain a light amount of pressure on the metal as you watch the sparks. Steel produces sparks that branch out into about 5 yellow streaks. All the streaks are different lengths. The ends of the sparks fan out into tiny branches or “leaves,” like on a tree. Search online for a visual aid by searching for the steel spark test. [9] X Research source- Both wrought iron and stainless steel produce long, even yellow streaks. The leaves on the end are smaller in stainless steel sparks.
- Steel made with less carbon produces yellow sparks with different lengths. The leaves on the end fan out more with a lot of extra little branches.
- Steel with high amounts of carbon produce sparks that begin spreading out near the grinding wheel. The sparks are duller or even red and fan out less at the end.
- Some metals, including nickel and aluminum, produce few or no sparks.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- The best way to learn how to identify steel is to practice on pieces you are already familiar with.Thanks
- Steel consists of a combination of other elements. These combinations vary widely, so knowing exactly which type of steel you have is difficult.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Always take safety precautions when breaking or grinding metal.Thanks
Advertisement
Things You’ll Need
Inspecting Metal Visually
- Clamp
- Hammer
- Chisel
Testing Other Metal Characteristics
- Small magnet
- Metal file
Performing a Spark Test
- Goggles
- Earmuffs
- Respirator
- Bench grinder
References
- ↑ https://www.engineeringtoolbox.com/aisi-sae-steel-numbering-system-d_1449.html
- ↑ http://www.crsi.org/index.cfm/steel/identification
- ↑ http://www.weldersuniverse.com/metals_steels.html
- ↑ https://www.marineinsight.com/guidelines/how-to-identify-metals-in-engine-room-observation-and-spark-test/
- ↑ https://sciencing.com/identify-metal-8527080.html
- ↑ https://sciencing.com/identify-metal-8527080.html
- ↑ http://www.capeforge.com/Spark%20testing.html
- ↑ https://www.marineinsight.com/guidelines/how-to-identify-metals-in-engine-room-observation-and-spark-test/
- ↑ http://www.capeforge.com/Spark%20testing.html
About This Article
Article Summary
X
You can identify steel by several properties, like its weight, color, and magnetism. Carbon steel, which is commonly used in pipes and buildings, is a dark brown color, while stainless steel is silver and shiny. Check your metal for a number code printed on it, which may indicate that it’s steel. Steel is also heavier than other silver metals like aluminum. It’s also magnetic, so if a magnet sticks to it, there’s a chance it’s steel. You can also rub the metal with a file to see how easily it breaks down. If it’s steel, it should take some effort to file off any fragments, while other silver metals will wear down more easily. For more tips, including how to do a spark test to identify steel, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 112,349 times.
Reader Success Stories
- "Buying steel from the scrap man for my projects has always been a problem, but with the spark test information, I now know what I've brought so I can use it appropriately. Thanks." ..." more
Advertisement
84%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Buying steel from the scrap man for my projects has always been a problem, but with the spark test information, I now know what I've brought so I can use it appropriately. Thanks."
..."
more
