PDF download Download Article PDF download Download Article

To install a staircase that will be functional, decorative, and safe, certain guidelines must be observed. The type of material to choose is a primary consideration. While stairs have been constructed using a variety of materials over the years, wood stairs remain the most common. Here's some suggestions on how to install wood stairs.

  1. Measuring the area where the stairs will be constructed is the best way to determine the kind of wood staircase you need. If there is plenty of space, you can choose a traditional split level with a landing, or a straight set of stairs. [1]
    • For a small, or more crowded area, you may need to install a spiral staircase. For the purpose of this article, we will choose the simplest, a diagonal up and down wood staircase.
  2. If possible, keep the lowest step away from doors or other obstacles such as vents, or busy passageways. The staircase can add beauty to a home as long as it isn't located in an inconvenient part of the room. Ideally, the staircase should be placed against a wall, which will give it more stability.
    Advertisement
  3. With 1 person on the floor, and another on a ladder, use a pencil with a straight edge or chalk line to mark a diagonal line for the stringer. The stringer is the part of the stairs that the steps, or threads, and risers will be attached. The risers are the vertical pieces perpendicular to the threads. [2]
  4. You will need 2 stringers and boards for the threads, as well as the risers, which can be purchased precut at a lumberyard. Ensure that you measure for the correct length and width. Avoid stringers and lumber for the threads and risers that is warped or splitting.
  5. With the help of at least 1 other person, place the stringer against the line on the wall. Place a level on the stringer where the thread will be attached. Locate the horizontal studs in the frame inside the wall. [3]
    • Using a framing hammer, nail the stringer to the wall studs, making sure each nail is securely in the stud. Further secure the stringer with braces all the way to the floor.
    • Align the second stringer for the correct width and height. The second stringer should be supported by a standard frame wall. Brace the wall under the stringer and secure with framing nails.
  6. Place the precut threads across the stringers and fasten with nails. Nail the precut risers vertically, between the threads to the stringers. [4]
  7. Fasten entire assembly to the stringers and to the wall at the top of the stairs.
  8. [5]
  9. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What is the angle or pitch of the stair stringers?
    Community Answer
    Store-bought is 45-degrees. Legally the pitch needs to be 39-45 degrees.
  • Question
    When would I need to get the building inspector look over the new set of stairs?
    Community Answer
    As soon as they're done temporarily or as soon as the stringers are installed. This provides the inspectors everything they need to know.
  • Question
    What is the normal measurement for how much the stair nose should stick out?
    Community Answer
    1.75 cm is the ideal, 3.8 cm is the max, and they should be rounded. Outside of this range, the stair is more dangerous and uncomfortable. The "bullnose" as it is called allows for the placement of the heel or toes slightly below the next/previous stair edge, which is more natural due to the way we walk on steps.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • To install a staircase wider than 36 inches (91.4 cm), use a third stringer in the middle for extra support.
      Advertisement

      Things You'll Need

      • Ladder
      • Pencil or chalk line
      • Level
      • Framing hammer and nails

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about home renovation, check out our in-depth interview with Agustin Renoj .

      About This Article

      Thanks to all authors for creating a page that has been read 143,097 times.

      Reader Success Stories

      • David H.

        Feb 24

        "I am going to tackle building a stair now. I need to design this for a friend. This has helped massively."
      Share your story

      Did this article help you?

      Advertisement