Download Article
Download Article
If you've always struggled with using knitting needles or find them uncomfortable, knit with a loom. Start by wrapping yarn around each peg in a continuous motion. Then wrap another row and lift the bottom loops over the top loops in order to create knit stitches. If you want to purl stitch, you'll only need 1 row of loops on the pegs. Keep the working yarn in front and below the loops on the pegs and pull the yarn up through the existing loops. Once you have the hang of the stitches, try a beginner project and then bind off.
Steps
-
Make a slip knot and slip it onto a peg. Take your yarn and make form a loop to make a slip knot. Slide the knot onto a peg on your loom. If your loom has an anchor peg, place it on a peg that's closest to the anchor. [1] X Research source
- If your loom doesn't have an anchor peg, you'll just need to keep track of where you started the row. Place the slip knot on any of the pegs.
-
Wrap the yarn counter-clockwise if you're knitting clockwise. Use your right hand to pull the working yarn towards the center of the loom. Then wrap the yarn counter-clockwise around the peg that's next to it going in a clockwise motion. Keep wrapping the yarn around each peg until you've gone around the loom. Work clockwise if it's more comfortable for you. [2] X Research source
- The lines of yarn should be closest to the inside of the loom if you've wrapped the pegs correctly.
- If your pattern calls for making knit stitches first, wrap another row of yarn around each peg so you have 2 levels of yarn on the pegs.
Advertisement -
Wrap the yarn clockwise if you're knitting counter-clockwise. If you prefer to knit counter-clockwise around the loom, wrap the yarn around each peg in a clockwise motion. Continue in the clockwise motion around each peg until you've gone around the loom. [3] X Research source
- The line of yarn should be nearest to the inside of the loom and you'll end up with 2 distinct lines on each peg.
- If you're knitting the first row, wrap the yarn around each peg of the loom 1 more time so you have 2 levels of yarn on each peg.
-
Use knit and purl stitches to work a loom project. Once you've established your foundation row, you can wrap the loops around the loom again in order to make knit stitches. You can also begin wrapping and lifting stitches in order to make purl stitches. Follow pattern instructions to craft your own projects using a combination of these stitches.
- If you're just learning, consider choosing a project that only uses knit stitches. Then you can begin adding purl stitches once you're comfortable with working on a loom.
Advertisement
-
Insert a loom hook into the lower loop. Take a loom hook and insert the tip under the bottom loop of a peg. The hooked portion of the hook should catch on the yarn so it doesn't slip off. [4] X Research source
- If you're concerned that your working yarn will come loose, wrap it around the anchor peg to secure it while you knit.
-
Pull the bottom loop up over the top loop on the peg. Bring the loom hook up and over the top of the peg. This will bring the bottom loop over the top loop on the same peg. Now you can take away the loom hook to use on the next peg. [5] X Research source
- Avoid pulling the stitches too tightly or it will be difficult to bring the bottom loops over the top loops.
-
Repeat the knit stitch for the next peg or according to your pattern. Continue to knit each peg on your loom if you're making a garter stitch. If your pattern calls for some knit stitches and some purl stitches, follow its instructions. [6] X Research source
- To make the garter stitch, knit every row.
-
Push down the stitches to make room on the pegs. Once you've knit the first row on your loom, use your fingers to push the knit stitches down towards the base of the loom. If you're making a row of knit stitches, wrap the yarn around each peg as you did when you cast on the foundation row and work the stitches. If you'll be making purl stitches, you don't need to wrap another row. [7] X Research source
- Keep track of how many rows you've made, especially if you don't have an anchor peg to use as a reference.
Advertisement
-
Hold the working yarn in front and below the loop on a peg. If you're going to make purl stitches, you don't need to wrap another row around the pegs. Instead, bring the working yarn in front of the loom away from the center. Hold the yarn below the loop on the peg you're ready to work. [8] X Research source
- You'll need the working yarn below the loop so you can pull it up and through the loop.
-
Insert the loom hook through the loop down toward the working yarn. Point the tip of the loom hook down and behind the loop on your peg. Push the loom hook through the stitch so the loop catches on the hook. [9] X Research source
- It may help to guide the hook through the groove on the peg.
-
Twist the hook to catch the working yarn and bring it up. Turn the working hook so the tip points up and hooks onto the working yarn that's below the loop. Pull the working yarn up so it makes a loop. [10] X Research source
- Avoid pulling the loop so it's a lot larger than the peg.
-
Remove the purl stitch and slide the loop onto the peg. Keep the loop on the end of your loom hook and pull it up so any of the stitches on the peg are lifted off. Then take the loop you just made and push it onto the peg. It should now be the only loop on the peg and you can bring the working yarn down below the next peg to make another purl stitch. [11] X Research source
- If it's easier, use your fingers to lift the stitches off of the peg before you place the purl stitch loop onto it.
Advertisement
-
Cut the yarn to leave a 2 feet (61 cm) tail and thread it onto a needle. When you're ready to bind off your work, cut the working yarn and leave a long enough tail to sew the end shut. You'll need to leave about 2 feet (61 cm) of yarn for most projects. Then thread the yarn onto a tapestry needle. [12] X Research source
- Ensure that you only have 1 loop on each peg before you begin binding off.
-
Insert the needle under a loop on a peg. Take the tapestry needle with the yarn and place it under the loop on a peg. The tip of the needle should be pointed up towards the top of the peg. [13] X Research source
- If you don't have a tapestry needle, you can use a flexible plastic needle.
-
Bring the threaded needle through the loop and pull it off. Keep pulling up on the yarn so all of it is worked through the loop on the peg. Once you've pulled it all through, use your fingers to lift the loop off of the peg. [14] X Research source
- At this point it's fine to drop the loop towards the center of the loom because it won't unravel.
-
Bind off every loop around the loom. Continue to bring the threaded needle through each loop and pull off each stitch. Work your way around the loom and bind off the loop from the final peg. [15] X Research source
- Now you should be able to remove the fabric from the loom because it's not connected at all to any of the pegs.
-
Pull and gather the fabric to secure it. Hold onto the loop that's next to the working yarn and use your other hand to pull the working yarn. You should see the fabric begin to gather and tighten. Once you've pulled it as tightly as you'd like, insert the needle into the nearby loop and make a knot. [16] X Research source
- Now you can cut the tail and weave in the ends.
Advertisement
-
Make a basic hat using the knit stitch. Select bulky yarn that's comfortable and cast on a foundation row. Knit every stitch and then bind off the fabric. The knitted material will look like a tube. Then you can thread the end and pull it tightly to gather it together. Stitch on a pom pom to secure the end.
- To make a smaller hat, knit a smaller tube before gathering one end.
-
Use the knit stitch to make an infinity scarf . Choose a yarn in your favorite color and texture. Cast on a foundation row and then knit every row until the scarf is as long as you like. Bind off the fabric and sew the ends together to make an infinity scarf.
- For a multi-colored scarf, use several yarns or a single yarn that's been dyed multiple colors.
-
Work a garter stitch to make a blanket . Once you're comfortable with knitting and purling, work a combination of rows to create a garter stitch. Make blocks of fabric and stitch them together to form a blanket in any size. [17] X Research source
- To make a multi-colored blanket, use a different color of yarn for each square.
-
Create easy tube socks. Socks are notoriously tricky to knit with needles, but they work up quickly on a loom. Use worsted weight wool and work a combination of knit and purl stitches to make a sock. Bind it off and then gather the end to form the toe end. Make another sock and enjoy your hand-knit tube socks.
- Remember to follow the pattern closely so the socks are identical.
Advertisement
Expert Q&A
Search
-
QuestionWhat can I use if I don't have a loom tool?Suzi Quillen is a Knitting and Crochet Expert based in Granite Falls, Washington. After honing a love of knitting and crochet and becoming a crochet pattern designer, Suzi founded Perfectly Knotty in 2014, an online hub for knitting and crochet learners and enthusiasts. Perfectly Knotty offers multiple avenues to inspire creativity in its customers, selling allergy-conscious yarns and fibers, offering crochet and knitting patterns, and providing stitching support via tips and resources.If you find yourself without the proper knitting tools, a crochet hook can serve as a suitable alternative, provided it matches the required size for your project.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Work clockwise or counter-clockwise around the loom depending on what your pattern calls for. If the pattern doesn't specify, work whichever way is most comfortable for you.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Round loom
- Yarn
- Loom hook
- Tapestry needle
- Scissors
Expert Interview
Thanks for reading our article! If you’d like to learn more about knitting and crochet, check out our in-depth interview with Suzi Quillen .
References
- ↑ https://www.montana.edu/extension/blaine/4-h/4h_documents/CrochetMadeEasy.pdf
- ↑ https://www.montana.edu/extension/blaine/4-h/4h_documents/CrochetMadeEasy.pdf
- ↑ https://honolulumuseum.org/app/uploads/2021/06/Creative-Activity-Tube-Knitting.pdf
- ↑ https://static1.squarespace.com/static/5754f47fcf80a16bffa02c45/t/60a2e00a46aeda15367e2ed6/1621286930158/Handout-French_Knitting.pdf
- ↑ https://ilove.ebpl.org/ebcreate/knitting-loom-kit
- ↑ https://www.missiontoseafarers.org/wp-content/uploads/MtS-Knitting-Patterns.pdf
- ↑ https://honolulumuseum.org/app/uploads/2021/06/Creative-Activity-Tube-Knitting.pdf
- ↑ https://www.craftyarncouncil.com/standards/how-to-read-knitting-pattern
- ↑ https://www.youtube.com/watch?v=lsrAA4djRlA&list=PLLALQuK1NDrh5bCuGCRkg3VU6QuI_9ovw
- ↑ https://www.youtube.com/watch?v=lsrAA4djRlA&list=PLLALQuK1NDrh5bCuGCRkg3VU6QuI_9ovw
- ↑ https://www.youtube.com/watch?v=f66Rk8ZKS_4&list=PLLALQuK1NDrh5bCuGCRkg3VU6QuI_9ovw&index=2
- ↑ https://americanenglish.state.gov/files/ae/resource_files/49_1_6_feature-article.pdf
- ↑ http://www.gov.pe.ca/photos/original/4h_knithotdogLG.pdf
- ↑ https://americanenglish.state.gov/files/ae/resource_files/49_1_6_feature-article.pdf
- ↑ https://www.youtube.com/watch?v=qQh63oLASZk
- ↑ https://static1.squarespace.com/static/5754f47fcf80a16bffa02c45/t/60a2e00a46aeda15367e2ed6/1621286930158/Handout-French_Knitting.pdf
- ↑ https://honolulumuseum.org/app/uploads/2021/06/Creative-Activity-Tube-Knitting.pdf
About This Article
Article Summary
X
To knit on a loom, start by making a slip knot and putting it onto a peg of your loom. Next, wrap your yarn around every peg on the loom. Once you have your foundation row, make a knit stitch. To make a knit stitch, insert a loom hook into the lower loop of a peg. Pull the bottom loop up over the top loop on the peg to bring the bottom loop over the top loop on the same peg. Now you can take away the loom hook to use on the next peg. Repeat this process according to your pattern. If you’re just learning how to use a loom, consider picking a project that only uses knit stitches so you can become comfortable with them. To learn how to make purl stitches, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 108,308 times.
Reader Success Stories
- "I had some looms that I didn't know how to use, and these clear instructions helped me understand how to use them. It also has great ideas for projects at the end!" ..." more
Advertisement
91%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I had some looms that I didn't know how to use, and these clear instructions helped me understand how to use them. It also has great ideas for projects at the end!"
..."
more
"Nowhere else on the web is there a better visual description on which direction (clockwise & counterclockwise) to go and how to knit on a loom."
..."
more
"I've been crocheting for almost a year, I found some looms at a thrift store, and this article is super helpful!"
..."
more
"I finally understand how to take it off the loom, thank the Lord."
"Nice clear instructions, easy to follow. Thank you."
