How to Lay a Brick Patio

PDF download Download Article
Learn how to plan and install your own brick patio
PDF download Download Article

Adding a brick patio to your house is a good way to dress up a yard, and it can also add value to your house. Laying a simple sand and brick patio is not as complicated as it sounds. Follow the steps below to create one for your backyard.

Part 1
Part 1 of 2:

Planning for Your Patio

PDF download Download Article
  1. Watermark wikiHow to Lay a Brick Patio
    If you've decided to make a patio, you probably already have a location in mind. However, before you get started you should determine the requirements necessary to create the patio. Make sure water drains away from the area. Is the location you initially considered large enough to fit the patio you want? Will certain obstacles force you to use a different layout than you had initially intended? A little time thinking about these issues will make the later steps that much easier.
    • Take into consideration any electrical lines, gas lines for a barbeque, and water pipes that you might already have or are considering installing in the future.
  2. Watermark wikiHow to Lay a Brick Patio
    After you have determined the size, you must consider a few things like the pattern used to place the pavers (the bricks) and the material that will be used as a border. Here are a few points to consider.
    • There are a number of designs you can follow for the pavers. Some of the best known are the "basket weave," the "jack on jack," and the "herringbone." The basket weave or "pinwheel" design involves sets of eight total bricks laid in groups of two, with each pair set together left to right adjoining another pair set at an angle perpendicular to them. The "jack on jack" pattern is a uniform set columns and rows, with each paver set end-to-end and side by side. The herringbone design is a pattern involving pavers abutting to create a ninety-degree angle, with the end of one paver used to cover the end of another.
    • The pattern you select will have a very real impact on the amount of time and energy needed to complete this project. For example, certain paver pattern designs will require you to precisely cut half of the pavers as you reach the edges of your patio, or you will have to purchase specially sized pavers with this in mind.
    • You must also determine if you want a border made of pavers or of wood. Lumber can provide a nice contrast to the pavers, and it is comparatively quick and easy to install. Pavers will take quite a lot more time to install but will seamlessly match the rest of your patio.
    • Pavers made of light aluminum, plastic, or light gauge steel can be anchored down with 10-inch spikes. This kind of edging is great for curves and angles.
    Advertisement
  3. Watermark wikiHow to Lay a Brick Patio
    Use your estimate of the size and your thoughts regarding the design of the patio to determine the quantity of the pavers you will need. Of course, there are some additional supplies that will be necessary in order for you to finish this project. A full list of supplies will be provided at the end of this guide, but some in particular are listed here as well.
    • Crushed stone or gravel (typically a ¾ minus road base material) may be used to fill the deepest portions of the excavation floor after you have dug out the area for the patio, providing stability and aiding drainage. You can determine the quantity yourself, but you should use at least 4 inches (10 cm) of crushed stone as the base layer. [1] Calculate the necessary volume of crushed stone or gravel before you head to the home or garden shop.
    • Bedding sand will make up the layer just below the bricks and can be used to fill the gaps between them. Polymeric joint sand can be swept into brick joints to help lock them into place. If you don't use crushed stone or gravel, this will also be the foundation of your patio. Some suggest that a layer just one inch deep is adequate, but others suggest at least twice that amount. [2] [3] You will need to know the volume of sand necessary when you make your purchase.
    • You may want to lay landscape fabric underneath to discourage the growth of weeds. It would require a lot of effort to remove weeds growing through your patio, so it is probably best to stop it before it starts. [4]
    • If you will use lumber along the edges of your patio as support, determine the quality and quantity of pressure-treated lumber you will require. There are a number of varieties available, but for a job like this you will want one rated for ground contact.
  4. Watermark wikiHow to Lay a Brick Patio
    You may also want to rent certain equipment, such as a gas-powered tamper to compact the soil and sand (manual tampers are also available for purchase, if you prefer). If you need to do a lot of cutting, look for a diamond-bladed wet masonry saw.
    5. Advertisement
Part 2
Part 2 of 2:

Making the Patio

PDF download Download Article
  1. Watermark wikiHow to Lay a Brick Patio
    It may be useful to stake out the corners and sides in order clearly identify the area as you work.
    • Leave an appropriate gap along the outside edge of the bricks for the border (whether of lumber or pavers).
  2. Watermark wikiHow to Lay a Brick Patio
    The depth to which you dig will be determined in part by the number of layers you intend to lay down. [5] If you will only be laying down sand, just four inches or less may suffice. If you're going to deposit a layer of crushed rock or gravel first, it may be ideal to dig the area to a depth of eight inches. [6]
    • If the patio is going to be right next to your house, you may want to encourage water to run away from the foundation of your home. [7] In this case, as you dig you can slope the ground away from the direction of the house. For each foot of length, add an additional 1/4 inch of depth to the excavation. [8]
    • Remove any large roots that may be apparent, even those just at the planned base of the dig. These can grow up through the bottom layers and undermine the stability of the patio.
    • If you intend to use pavers for the border, dig deeper along the edge. This will allow you to stand the pavers up on end.
  3. Watermark wikiHow to Lay a Brick Patio
    The soil must be firmly in place if it is to support the weight of the patio. If you are using a manual tamper this process can take some time, but it cannot be rushed.
  4. Watermark wikiHow to Lay a Brick Patio
    It should be spread out up to a depth of four inches. Make sure to maintain the integrity of the slope you may have created earlier. The rock should also be tamped into place to solidify the foundation of the patio. [9]
  5. Watermark wikiHow to Lay a Brick Patio
    This should prevent the growth of weeds.
  6. Watermark wikiHow to Lay a Brick Patio
    If you are not digging deep or laying down a rock layer, you may want to do this immediately following the excavation.
    • It may be desirable to screw the boards together if lumber is being used as the border. The added stability will help hold the patio in shape.
    • If pavers are being used, stand them up in the trench you dug for the edge and tap them into place. Try to fit them as snugly together as you can.
    • Whether using boards or pavers, make sure that your border is installed at the desired angle (or, more likely, with no angle) by using a level.
  7. Watermark wikiHow to Lay a Brick Patio
    One to two inches are considered a reasonable amount, and it is no longer desirable to maintain the slope you may have created earlier. It is now necessary to level off the sand with a screed (which is a term used for any object used to scrape or level). [10]
    • You can make a screed out of spare lumber.
    • Tamp down the sand. Be careful not to disturb the level surface that you have created.
  8. Watermark wikiHow to Lay a Brick Patio
    Press them into the sand as you lay them. Lay the pavers as closely together as you can and use a rubber mallet to seat them into the sand. Use a small level to check the bricks in 2 directions, and use at least a 6-foot level for a drainage slope.
  9. Watermark wikiHow to Lay a Brick Patio
    Carefully sweep the sand to fill in the cracks between the bricks and along the edge. Only do this after all the bricks are in place. If some of the bricks aren't in yet, sweeping the sand into unstable joints will cause the bricks to move around. [11]
  10. Watermark wikiHow to Lay a Brick Patio
    Use only a small amount of water, as using too much will wash the sand away and loosen the joints. This will allow the material to settle between the bricks. Your project is now complete.
    • You can also sweep the sand away rather than spraying water.
    11. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you lay pavers directly on dirt?
    Scott Johnson
    Landscape & Design Consultant
    Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.
    Scott Johnson
    Landscape & Design Consultant
    Expert Answer
    No, you really don't want to do that. You need to excavate the area and lay a road base on the soil. Then, you pour a layer of sand over the road base. The pavers go on top of the sand. If you don't do this, the pavers will shift over time.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 4
  • Question
    I'm using surplus bricks with scalloped edge. Are there any concerns I should watch out for?
    Anthony "TC" Williams
    Experienced Landscaper
    Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.
    Anthony "TC" Williams
    Experienced Landscaper
    Expert Answer
    You should be fine! Just make sure there are no protruding edges that could cause tripping hazards.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    How do I calculate the amount of paver for area?
    Anthony "TC" Williams
    Experienced Landscaper
    Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.
    Anthony "TC" Williams
    Experienced Landscaper
    Expert Answer
    First, measure the area of one brick by multiplying its length by its width. Add about 10% extra for cuts or broken bricks. Then divide that by the square area of the location of your patio.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Get SW rated pavers if you live in an area where snow and ice is common in winter. These are bricks that are designed to withstand severe changes in temperature and resist cracking.
        Thanks
        Helpful 0 Not Helpful 0
      • Kneel either on the sand or on a piece of plywood as you lay the bricks. Kneeling directly on the bricks may dislodge or shift them.
        Thanks
        Helpful 1 Not Helpful 0
      • If you choose a rectangular pattern for your brick patio, an easy way to ensure a perfect rectangle would be to measure the two diagonals. The measurements should be of equal length.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Shovel
      • Measuring tape
      • 2 foot (0.6 m)-long (0.61 m) wooden stakes
      • A level
      • Gravel
      • Wood screws
      • 1 x 3 inch (2.5 cm x 7.5 cm) wooden strapping
      • Sand or stone dust
      • 2 x 4-inch (5 cm x 10.1 cm) piece of wood long enough for screeding with
      • Pavers
      • Rubber mallet
      • Mason's line
      • Broom

      You Might Also Like

      How to
      Build a Brick Wall
      How to
      Hang Something on Brick
      How to
      Build a Chimney
      How to
      Hang on Stucco Without Drilling
      How to
      Nail Into Brick
      How to
      Stucco a House
      How To Sculpt Stone Like an Artist
      How to
      Build Brick Columns
      An Expert-Approved Guide to Cutting Brick like a Pro
      How to
      Paint Cinder Blocks
      How to
      Make a Brick Kiln
      How to
      Remove Efflorescence from Brick
      How to
      Drill Into Brick: Preparation, Tools, and Best Methods
      How to
      Make Bricks from Concrete
      Advertisement

      References

      1. ↑ http://landscaping.about.com/cs/hardscapefences1/ht/brick_patio.htm
      2. ↑ https://www.hgtv.com/outdoors/outdoor-remodel/paver-patios
      3. ↑ http://landscaping.about.com/cs/hardscapefences1/ht/brick_patio.htm
      4. ↑ http://landscaping.about.com/od/weedsdiseases/ss/weed_fabrics.htm
      5. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      6. ↑ http://landscaping.about.com/cs/hardscapefences1/ht/brick_patio.htm
      7. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      8. ↑ http://landscaping.about.com/cs/hardscapefences1/ht/brick_patio.htm
      9. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      1. ↑ http://www.merriam-webster.com/dictionary/screed
      2. ↑ http://landscaping.about.com/cs/hardscapefences1/ht/brick_patio.htm

      About This Article

      Article Summary X

      To lay a brick patio, start by excavating the site with a shovel and packing it with soil to support the weight of the patio. Next, lay down gravel or crushed rock to solidify the foundation, and cover the top with landscaping fabric to prevent weeds. Then, install a border of wooden boards or brick pavers, lay down a layer of sand, and level off the sand before positioning the pavers into place. Once you’ve laid all the pavers, sweep a layer of sand into the cracks between the bricks, then sweep away the excess sand from the top of the patio. For more advice from our Landscaping reviewer, including how to design for your patio, keep reading.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 302,610 times.

      Reader Success Stories

      • Ed Key

        Jul 20, 2016

        "This how-to was like a Haynes manual, and that's the best praise I can give to this nicely detailed piece. Not ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement