PDF download Download Article PDF download Download Article

Hanging plants are a great decoration for any room to create a cozy, boho vibe. But let's be real, hanging planters are expensive. Luckily, you don’t need to buy one! Macrame plant hangers are super easy to make yourself with just a few dollars and some rope. In a few minutes–and with a few simple knots–you’ll have your very own DIY macrame plant hangers.

1

Gather Your Materials

PDF download Download Article
  1. For a standard planter about 10 in (25 cm) high, you’ll need each piece of rope to be 100 in (250 cm), or a little more than 8 ft (2.4 m) long. Get at least 25 ft (7.6 m) of 3 16  in (0.48 cm) cotton rope. Most hardware or craft stores have rolls of rope for just a few dollars, so this shouldn’t be hard to find. [1]
    • You could also use a different type of rope for this activity. Jute or polyester are popular choices. Also look for colored rope if you want to be more decorative.
    • Make sure the rope is thin enough for you to tie knots with. If it’s too thick, it won’t work for this project.
  2. Advertisement
2

Cut the Rope

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Unroll the rope and measure out 100 in (250 cm), then cut the rope. Repeat this to get 3 equal pieces. [2]
    • It’s always best to cut each strand a bit longer so you have plenty of room to work. You can always trim away any excess when you’re finished.
    • The original length of the rope will give you a hanger a little less than half as long. 100 in (250 cm) of rope will give you a planter about 4 ft (1.2 m) long. If you want it shorter or longer, you can adjust the rope length. 80 in (200 cm), for example, will give you a 40 in (100 cm) hanger, or a little over 3 ft (0.91 m).
    • You could also use 4 strands, or even more, depending on the look you're going for. The process isn't much different. You'd just have to tie a few more knots if you have more rope. [3]
3

Loop the Rope Through the Carabiner

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Pull the pieces through until you reach the halfway point. [4] Fold the rope so you have 6 individual strands in total.
    • Remember that the number of strands will be different if you use more rope.
    • You could also use a plain metal ring if you don’t have a carabiner.
  2. Advertisement
4

Tie a Knot

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Hold all 6 strands in one hand. Then loop the carabiner around them and pull it to make a knot. Make sure it’s tight so all the strands are held together. [5]
    • Try to get this knot as close to the carabiner as possible. Feel free to undo the knot and try again if you have to.
    • If you're using more strands, then make sure you loop all of them into a knot. Don't leave any sticking out.
    • For a more decorative approach, you could also tie colored string below the carabiner to hold the strands together. [6]
5

Divide the Rope

PDF download Download Article
  1. It’ll be much easier to work on the hanger this way. Lay the rope out on a long table or the floor. Spread each strand out straight. Then group them into 3 pairs of 2 by pairing each strand with the one next to it. [7]
    • For this project, the pairs would be the 1st and 2nd strands, the 3rd and 4th strands, and the 5th and 6th strands.
    • You'll have more pairs if you use more pieces of rope. For example, if you used 4 pieces instead of 3, then you'll have 4 pairs. [8]
    • Some people prefer to work on the planter while it’s hanging. In this case, you can hang it up by the carabiner and tie the rope afterward.
  2. Advertisement
6

Attach the Strands

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Take a ruler or tape measure and measure 18 in (46 cm) down from the top knot. Then take the first pair and loop them around each other to make a simple knot. Repeat this for the other 2 pairs of rope. [9]
    • Make sure each knot is at the same height or your hanger will be uneven.
    • These knots are where the top of your planter will rest, so you can adjust the height if you want to.
7

Tie the Strands Together

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Once again, take your ruler or tape measure and measure 5 in (13 cm) down from the knots you just tied. This time, don’t tie together each pair. Instead, tie the 2nd and 3rd strands together. Then tie the 4th and 5th strands together as well. This creates a tiered hanger for more support and decoration. [10]
    • These knots are about where the middle of the planter will sit. If you’re not liking the height for your hanger so far, you can always untie the knots and make adjustments.
  2. Advertisement
8

Complete the Pattern

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Complete this pattern by folding the 1st strand across the other strands to the 6th one. Then tie these 2 together. [11]
    • This pattern will be a bit different if you use more strands for your hanger. If there are 4 pieces and 8 strands, for example, then you'd tie the 1st and 8th ones together. [12]
9

Make a Finishing Knot

PDF download Download Article
  1. Watermark wikiHow to Make a Plant Hanger
    Measure 6 in (15 cm) more down from the previous knots and hold all 6 strands. Loop them around each other and pull to make a knot at the bottom of the hanger. [13]
    • Make sure this knot is tight. If it comes undone, the planter will fall.
    • You could also use less space in between the knots and add more for decoration. You can try this if you make more than 1 hanger.
  2. Advertisement
10

Trim Extra Rope

PDF download Download Article
  1. This depends on what you prefer. If you like the look of the extra rope dangling at the bottom, then leave it. If not, then trim it away with scissors. [14]
    • You could always wrap colored string around the excess rope to make a decorative pattern. [15]
11

Install Your Hook

PDF download Download Article
  1. You can use either of these to mount your hanger. Find the spot where you want to hang the planter, then locate the nearest stud. Drive a nail into the stud or screw a hook into the wall where you want to mount the hanger. [16]
    • You could also screw a hook into the ceiling if you prefer to mount the planter like this. [17]
  2. Advertisement
12

Hang Your Carabiner

PDF download Download Article
  1. Once the hook is mounted, then hanging the plant is easy. Start by taking the hanger and looping the carabiner over the nail or hook. Make sure the hanger is secure before putting the planter in. [18]
    • You can test the hook by giving the hanger a light tug to make sure it doesn’t come loose.
13

Hang Your Plant

PDF download Download Article
  1. Once you’re sure the hanger is secure, you can mount the planter. Pick up the planter and tuck it into the hanger so it rests on the bottom knot. Adjust the strands so they wrap around the planter and hold it in place. [19]
    • Hold onto the planter and let it go slowly to make sure it doesn’t fall out.
  2. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you hang plants off the wall?
    Amy Guerrero
    Arts & Crafts Specialist
    Amy Guerrero is an Arts and Crafts Specialist and the Owner of Sunshine Craft Co., a crafting studio based in Phoenix, Arizona. Amy specializes in macrame, DIY crafting, and teaching fiber arts. She offers monthly in-person and online workshops along with having developed a range of DIY craft kits for at-home projects. Amy holds a BS in Industrial Design from Philadelphia University. She worked as a graphic designer before starting her own business. Sunshine Craft Co. is a creative hub that offers a wide range of workshops, tools, and resources for any craft project to inspire creativity and community engagement.
    Arts & Crafts Specialist
    Expert Answer
    Use a shelf bracket! Using a shelf bracket allows you to hang your plant hanger away from your wall without having to hang it from the ceiling.
Ask a Question
      Advertisement

      Things You’ll Need

      • Rope or twine
      • Scissors
      • Nail
      • Carabiner
      • Ruler or tape measure

      Tips

      • You can also braid the strands together if you want to try a different style for your hanger. [20]
      • If you have a few planters to hang, then you can make several hangers at different lengths for a more decorative effect.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about gardening, check out our in-depth interview with Amy Guerrero .

      About This Article

      Thanks to all authors for creating a page that has been read 49,633 times.

      Did this article help you?

      Advertisement