DIY Rabbit Cage: A Complete Tutorial

PDF download Download Article
Make your very own bunny cage with wood, wood screws, and screen material
PDF download Download Article

There are many different ways you can build your own rabbit cage, ranging from simple and cheap to complicated and expensive. If you’re building your first-ever rabbit cage, your best bet is a simple screened box with an open bottom for you to access the rabbits from. This cage design is easy to build using common hand tools and a few materials you can purchase from your local hardware store. You can use this cage inside your home or outdoors. If you choose to use it inside, you may want to lay a tarp beneath it to keep rabbit droppings from sticking to your floor.

Part 1
Part 1 of 3:

Building the Wooden Frames

PDF download Download Article
  1. The basic shape of the rabbit cage is made up of two wooden frames connected by four posts. Purchase 2 in (5.1 cm) by 4 in (10 cm) lumber from your local hardware store and use a wood saw to cut them to the appropriate lengths. Once completed, the cage will measure 6 feet (1.8 m) long by 3 feet (0.91 m) wide and 2 feet (0.61 m) tall, which is enough for 2 or 3 medium sized rabbits.
    • You will need 4 pieces that measure 3 feet (0.91 m) in length, 4 that measure 2 feet (0.61 m), and 4 that measure 6 feet (1.8 m).
    • You will also need one piece of plywood that measures 3 feet (0.91 m) by 2 feet (0.61 m). You can either cut that yourself or purchase a piece of that size from your local hardware store.
    • Always wear eye protection when sawing wood.
  2. Lay one of the 6 ft (1.8 m) pieces of wood on the ground on its side. Then position a 3 ft (0.91 m) piece perpendicular to it on one side, so the two pieces create the shape of an L. Use screws and a power drill or electric screwdriver to bind the two pieces together in this position.
    • Use screws that are at least 3 inches (7.6 cm) long to ensure they penetrate through both pieces of wood.
    • You can purchase wood screws at your local hardware store.
    Advertisement
  3. Position another 3 ft (0.91 m) piece of wood at a perpendicular angle to the 6 ft (1.8 m) piece you already used, but this time on the opposite side so the three pieces of wood form a U shape. Then secure the third piece in place with screws.
    • Make sure you position the 3 ft (0.91 m) pieces of wood on both sides of the 6 ft (1.8 m) piece in the same way so they match.
  4. Grab a second 6 ft (1.8 m) piece of wood and lay it on its side across the two extended 3 ft (0.91 m) pieces. With all four pieces laying on the ground, the wood should now take the shape of a rectangle.
    • Use screws to attach the second 6 ft (1.8 m) piece of wood to the others to create the rectangle shape.
    • Insert two screws into each corner to ensure the frame is strong and stable.
  5. Follow the same steps above when building a second frame that matches the first one. These two frames will serve as the top and bottom of the rabbit cage.
    • Repeat the steps exactly to ensure both frames are a perfect match for one another.
    • Once finished, you will have two matching wooden rectangular frames.
    6. Advertisement
Part 2
Part 2 of 3:

Constructing the Rabbit Hutch

PDF download Download Article
  1. This frame will serve as the bottom of the cage. Make sure you lay it down in an area where you have sufficient room to work, but it doesn’t have to be where the cage will remain permanently. [1]
    • Once finished, the frame will be small enough to move with a friend.
    • If you are building the cage indoors, make sure there’s enough room around the frame for you to easily move around to each of its four corners as you work.
  2. The 2 ft (0.61 m) pieces of wood are posts that will hold up the second frame as the top of the cage. Place the 2 ft (0.61 m) piece upright inside the four corners of the frame that’s on the ground, then use two 3 in (7.6 cm) wood screws on each post to secure them to the frame.
    • Align the posts so that they are standing perfectly upright before screwing them into place.
    • Mount all four posts to the bottom frame before moving on to the next step.
  3. Ask a friend to help you lift the second wooden frame up so you can slide it over the upright posts attached to the bottom frame. Position the upper frame so the posts are inside all 4 corners and lower the frame until the posts and the top of the frame are flush or even. [2]
    • Once you have the frame positioned, you and your friend will have to hold it in place until it is secured.
  4. Have your friend insert a 3 in (7.6 cm) wood screw through the upper frame and into each upright post to hold it in place. Once those first 4 screws are in, you and your other friend can let go of the frame. Then add an additional 3 in (7.6 cm) screw to each corner to ensure it’s secure and stable. [3]
    • You may be able to use just 1 screw per corner, but 2 will be sturdier.
    • With the screws in place, the basic frame of the cage is complete.
  5. A rabbit cage should include an area that’s elevated from the ground and offers the rabbits shelter. Lay a piece of plywood that measures 3 feet (0.91 m) by 2 feet (0.61 m) across the bottom frame on one side. Then use wood screws to secure it into place. [4]
    • This step will create a small portion of the cage with an elevated floor.
    • The remainder of the cage floor will be open to the ground.
  6. You can purchase pre-made rabbit shelters from your local pet store, but there are a number of inexpensive alternatives. Any overturned plastic container with a hole cut for a door can serve as a rabbit shelter for inside your cage. [5]
    • The shelter will give the rabbits a place to hide from rain or intense sunlight.
    • It is easier to put the shelter in place before enclosing the cage, but you’ll still be able to access it from the bottom when the cage is complete.
    7. Advertisement
Part 3
Part 3 of 3:

Enclosing the Cage

PDF download Download Article
  1. Just about any metal screen or wire chicken fence will do for the sides of your enclosure. Purchase a roll of your choice in screen material from your local hardware store and then unroll it across the top of your rabbit cage to cover the entire opening.
    • Choose a screen or mesh material with openings that are smaller than a rabbit will be.
    • You will need at least 24 feet (7.3 m) of screen material, but you’ll want to purchase a bit more than that to ensure you have slack to work with.
  2. Lay staples across the wire of the screen and into the wooden frame. Secure the screen to the entire top of the cage by placing a staple every 4 inches (10 cm) or so, while keeping the screen taught across the top. [6]
    • Be sure to keep the screen pulled tight over the frame as you stable it in place to avoid creating any loose portions a rabbit could escape through.
    • You can purchase a staple gun and staples at your local hardware store.
  3. Use wire cutters or metal shears to cut the screen that hangs over the sides of the frame away. Cut the screen so no metal extends beyond the wood; otherwise, it may snag your clothes or scratch you as you walk past the cage. [7]
    • You can also use pliers to fold any bits of metal extending out from the frame back onto itself so no sharp points are sticking out.
    • Cut the screen you secured to the top away from the roll so you can use the roll to cover the rest of the cage as well.
  4. The easiest way to secure the screen to the sides of the cage is to lay the cage frame on its side and roll the screen out over it just as you did with the top. Staple the screen in place, using one staple every 4 inches (10 cm) or so, then rotate the cage and do the same for the next side.
    • Repeat this process for all four sides until the cage now has a screen secured over everything but the very bottom.
  5. Use your shears or wire cutters to remove all the excess screen material hanging off of the sides you covered. The cage will not be completely enclosed except for the bottom. This open bottom is by design, so you can lift the cage up to get to the rabbits rather than installing a door. [8]
    • If you choose to screen in the bottom of the cage because you’re worried about animals digging their way in or out of the cage, consider zip tying the screen in place so you can remove it and gain access to the interior of the cage when necessary.
  6. With the cage flat on the ground or floor, lift up the opposite side from the rabbit shelter. Have a friend hold the cage up while you place your rabbits inside, then carefully lower the cage back down to enclose them in. [9]
    • To clean the cage, have a friend lift up the end opposite from the rabbit shelter and remove the rabbit. Then you can turn the cage onto its side or even upside down for easy cleaning.
    • To give the rabbit food or water in the cage, lift up the same end to slide the bowl in.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I use a fleece blanket as bedding for my rabbit?
    Community Answer
    Yes, you can. Make sure it is clean and does not have the scent of another rabbit on it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 48
  • Question
    How do you know when a rabbit is happy?
    Community Answer
    Rabbits are happy when they are well-cared for, and they will show it by having energy and hopping around.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 71
  • Question
    How often should I clean out my rabbit's cage?
    Community Answer
    There is no hard-and-fast rule. It depends on the size and breed of your rabbit, and the time of year. When the rabbit is shedding, more frequent cleaning is necessary. Clean the cage whenever it is more than half soiled.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 47
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • The best way to house a rabbit is to put the rabbit in a big doggy pen with plenty of free time, or, even better, free-roaming. But please understand that to free-roam rabbits, you have to make sure that your house is bunny-proof. Cover up wires, because if they're chewed, it can cause your rabbit to be electrocuted. But don't let that scare you from letting your bunny run around. It's very important for them to get out time.
        Thanks
        Helpful 3 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never let your rabbit live outside. The rabbit is exposed to predators and can get all kinds of sicknesses.
        Thanks
        Helpful 3 Not Helpful 2
      Advertisement

      Things You'll Need

      • 4 pieces of 2 in (5.1 cm) by 4 in (10 cm) wood cut to 3 feet (0.91 m) in length
      • 4 pieces of 2 in (5.1 cm) by 4 in (10 cm) wood cut to 2 feet (0.61 m) in length
      • 4 pieces of 2 in (5.1 cm) by 4 in (10 cm) wood cut to 6 feet (1.8 m) in length
      • Plywood measuring 3 feet (0.91 m) by 2 feet (0.61 m)
      • Power drill or screw driver
      • 3 in (7.6 cm) wood screws
      • Roll of screen material at least 24 feet (7.3 m) long
      • Wire cutters or shears
      • Staple gun and staples

      You Might Also Like

      How to
      Raise Rabbits
      How to
      Make a Backyard Fish Pond
      How to
      Care for Newborn Rabbits
      How to
      Build a Rabbit Hutch
      How to
      Prepare a Rabbit Cage
      How to
      Build an Outdoor Rabbit Cage
      Advertisement

      References

      1. ↑ https://youtu.be/aPWW47-iKQM?t=99
      2. ↑ https://youtu.be/aPWW47-iKQM?t=104
      3. ↑ https://youtu.be/aPWW47-iKQM?t=104
      4. ↑ https://youtu.be/aNflEpcXt-I?t=82
      5. ↑ https://youtu.be/aNflEpcXt-I?t=89
      6. ↑ https://youtu.be/aPWW47-iKQM?t=120
      7. ↑ https://youtu.be/aPWW47-iKQM?t=73
      8. ↑ https://youtu.be/aPWW47-iKQM?t=73
      9. ↑ https://youtu.be/aNflEpcXt-I?t=14

      About This Article

      Article Summary X

      To build your own rabbit cage, build 2 wooden frames that are 6 feet long by 3 feet wide. These will be the top and bottom of the cage. Attach the frames with a 2-foot post at each corner. Screw a 3 ft by 2 ft piece of plywood onto one side of the lower frame to create a raised floor, then place a rabbit shelter on the plywood. Once the cage is set up, attach a screen to the top and the sides of your enclosure. To put your rabbits in the cage, just lift up one side and slide them in. Read on to learn how much screen you’ll need for your cage!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 406,267 times.

      Reader Success Stories

      • Lillie Reneau

        Sep 14, 2018

        "I have two bunnies of my own, and one has learned how to escape his current cage. I've been looking for the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement