Download Article
Download Article
Making a sock puppet is really quite fun. The thing that makes sock puppets so fun is making each one unique. Each one can have special characteristics! And they don't have to be human––animals and aliens and computers are great possibilities. Once you know how to make a simple sock puppet, you can even try a more advanced one!
Steps
-
Find a clean sock that's long enough to cover your arm. A crew sock or a knee sock would work great for this! The sock can be any color you like. It can be fuzzy or plain. It can even have stripes or polka dots! Just make sure there aren't any holes. [1] X Research source
-
Slip the sock over your hand. Once you the sock on, make a C-shape with your hand. Put your fingers into the toe part. Try to get your thumb into the heel part. If you can't reach it, tuck the sock into the groove between your thumb and fingers. [2] X Research source- Open and close your hand. Your sock should already start looking like a puppet.
Advertisement -
Use a marker to make two dots above the seam for the eyes. If you want your puppet to have a nose, make a dot for that as well.
-
Take the sock off. Spread it flat on the table. The marks for the eyes and nose may look out of place, but that's fine. This is why you made them while wearing the sock.
-
Glue some eyes onto the sock. You can do this with a hot glue gun, fabric glue, or tacky glue. For the actual eyes, you can use buttons, pompoms, or googly eyes. You can also draw the eyes on with a marker. [3] X Research source
- If your puppet is a girl, draw some eyelashes with a marker!
-
Glue a small pompom just above the seam for the nose. You can also cut a triangle or circle out of felt and use that instead. A button would also make a cute nose. If you don't have any of these, you can draw a nose on instead!
-
Add some other decorations. Your puppet is done at this point. You can still glue items onto it to give it more character. For example, you can glue some yarn to the top for hair. For more ideas, click here .
Advertisement
-
Cut the toes off of a sock with fabric scissors. Find a sock long enough to cover your arm. It can be any color or pattern. A solid sock would work for just about any character, while a spotted one could make a leopard. You can even use a striped sock to make a zebra! Once you are happy with your sock, cut the toes off with fabric scissors, using the toe seam as a guide.
- Those funky, fuzzy socks work the best for this type of puppet, but you can use plain socks too.
-
Cut a 4-inch (10.16-centimeter) oval out of thin cardboard. Get some thin cardboard. Draw an oval on it that is about 4 inches (10.16 centimeters) long. It should a little narrower than your sock. Cut the oval out with a pair of scissors. [4] X Research source
- You can use an old cereal box for the cardboard.
-
Cut a matching oval out of felt, then set it aside. Use the cardboard oval you just cut out to trace another oval onto a sheet of felt. Cut the felt oval out, then set it aside. You will be gluing this to the inside of the mouth later. [5] X Research source
- Pink or red would work the best, but you can use a different color too.
-
Fold the cardboard oval in half to make a crease. Unfold the oval when you are done. It will be bent like a V, which is good.
-
Tuck the oval into the cut part of the sock. Keeping it bent like a V, tuck the oval into the sock. Pull the cut edges of the sock over the edges of the oval. Don't worry if things don't look perfect. You will be fixing that later.
-
Glue the sock to the top and bottom of the oval. Set the sock down and open the mouth. Pull the edges of the sock over the top and bottom (narrow) ends of the oval by ½-inch (1.27-centimeter). Glue them down with hot glue. Don't worry if the sides get messed up. You'll fix that next.
- If you don't have hot glue, fabric glue or tacky glue may also work.
-
Glue the sock to the side edges of the oval. Pull a bit of sock over the side edge of the oval by ½-inch (1.27-centimeter) and glue it down. Work your way from the top edge of the oval to the bottom. When you are done, do the other side of the oval too.
-
Glue the felt oval into the mouth. Draw a line of glue around the inside of the puppet's mouth. Press the felt oval into the glue. Make sure that the edges match up. This will give the inside of the mouth some color and cover up the cut part of the sock.
- If you are using hot glue, work a little bit at a time so it doesn't dry too fast.
-
Decorate the puppet. You can have the heel part be on the top or bottom of the puppet. Glue some googly eyes or buttons for the eyes. Add a smaller pompom or button for the nose. If you want to give your puppet a tongue, cut a long tongue shape out of red or pink felt, then glue it inside the mouth. [6] X Research source
- Don't glue the tongue all the way down. This way it can flap around!
- For more decorating ideas, click here .
Advertisement
-
Decide how much more your puppet needs. You don't have to use everything from this section. Take a look at your puppet, and decide what character you want it to be. Pick some ideas from the list before, or make up your own decorations!
-
Make arms using pipe cleaners and rolled up pieces of felt. Fold a pipe cleaner in half. Fold a piece of felt around the pipe cleaner, then secure it with glue. Trim the felt down so that it is the same length as the pipe cleaner, plus 1 inch (2.54 centimeters). Cut one end of the arm into a hand shape, then glue the other end to the puppet.
- Repeat this step to make the other arm.
-
Use yarn to add some hair, if desired. Wrap some yarn around your hand (short) or a book (long). Slide it off and cut apart the loops on one end. Tie a piece of yarn around the middle to hold it all together. Glue this to the top of the head, right above the eyes. [7] X Research source
- The more times you wrap, the thicker the hair will be. Wrap it at least 10 times.
- You can use a similar technique to give your puppet a mustache!
- Leave the hair down or cut it. You can also braid it or put it into pigtails.
- You can also make hair out of pipe cleaners or cut shapes out of felt.
-
Glue googly eyes to pompoms to make silly eyes. Glue two large pompoms to the top of your puppet's head. The pompoms can be as close together or as far apart as you want. Next, glue a googly eye to the front of each pompom (not the top).
-
Draw on some defining features. Here is where you can get really creative! All you need is a fabric marker or a permanent marker. Try one of the ideas from below:
- Draw eyelashes if it's girl puppet.
- Draw freckles or a beauty mark under the eyes.
- Add some thick eyebrows or a mustache.
- Outline the puppet's mouth in red for lipstick.
-
Make accessories for the puppet. These can add lots of character to your puppet. All you need are some pipe cleaners, buttons, glue, and extra felt. Below are some ideas to get you started: [8] X Research source
- Cut a bow or tie out of felt, then glue it to the puppet.
- Make a pair of glasses out of pipe cleaners.
- Glue fancy buttons to either side of the puppet's head for earrings.
- Make a bow out of ribbon, then glue it to the top of the puppet's head.
-
Use pompoms, craft foam, or felt to turn it into a monster. Sock puppets look silly enough on their own. You can make yours even sillier by turning it into a monster. Try one of these ideas:
- Glue pompoms all over its body to make warts.
- Cut triangles out of felt or craft foam to make spikes.
- Give it some teeth or fangs. White craft form works the best for this.
- Make some horns for it out of craft foam or pipe cleaners.
Advertisement
Community Q&A
Search
-
QuestionCan I do this with a glove?Community AnswerDefinitely. Just make sure that you keep your fingers together or tape them together when using the glove puppet, otherwise it might look weird.
-
QuestionI can buy it from a shop, why should I make this?Community AnswerIt is better to make it because you can design it on your own, one that you could never buy from a mass production line of toys that all look the same. Plus, it saves money because you use things you've already got from home. Best of all, if you know how to make your own things, you won't be throwing money away under the mistaken belief that bought is better, allowing you to save up your pennies.
-
QuestionCan I still make a sock puppet if I don't have a hot glue gun or superglue?Community AnswerYes, you can still make it using regular glue. It just won't stick as well as superglue or a hot glue gun.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Reader Videos
Tips
- Avoid socks that are too thin or that have holes.Thanks
- If you are using fabric glue or hot glue, you will have to wait for it to dry.Thanks
- Make several puppets, then put on a puppet show.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you are using a hot glue gun, ask an adult to help you.Thanks
Advertisement
Things You'll Need
Making a Simple Puppet
- A clean, long sock
- Marker
- Scissors
- Glue
- Pompoms, buttons, googly eyes, etc.
Making a Fancy Puppet
- A clean, long sock
- Marker
- Scissors
- Glue
- Thin cardboard
- Pompoms, buttons, googly eyes, etc.
References
- ↑ https://www.portagemi.gov/DocumentCenter/View/2673/Sock-Puppet-Instructions
- ↑ https://www.portagemi.gov/DocumentCenter/View/2673/Sock-Puppet-Instructions
- ↑ https://www.pbs.org/parents/printables/create-your-own-sock-puppet
- ↑ https://www.youtube.com/watch?v=0sHP-OSjNxw
- ↑ https://www.youtube.com/watch?v=0sHP-OSjNxw
- ↑ https://www.youtube.com/watch?v=1Nh0n2LcU7I
- ↑ https://www.youtube.com/watch?v=1Nh0n2LcU7I
- ↑ https://www.pbs.org/parents/printables/create-your-own-sock-puppet
About This Article
Article Summary
X
To make a simple sock puppet, find a clean sock that’s long enough to cover your arm. Slip the sock on so your fingers are in the toe area and make a C-shape with your hand. If you can reach, put your thumb into the heel area of the sock. If not, tuck the sock into the groove between your thumb and fingers. Use a marker to make 2 dots above the seams for the eyes, and add a nose if you like. Take the sock off and spread it out flat on a table, then glue or sew buttons onto the eye dots. If you want, you can add other decorations, like attaching yarn as its hair. If you want to learn how to add more fabric and cardboard to make a mouth for your puppet, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,101,490 times.
Advertisement
