With water, dish soap, and a bit of spinning, you can make a tornado in a bottle! This can be a great way to learn how tornadoes work. [1] X Research source For a basic experiment, try making a tornado in a single bottle. If you want to get more advanced, try putting two bottles together. Read on to learn how to get started!
Steps
-
Fill a plastic bottle with water. Leave two inches of air at the top of the bottle. The size of the bottle doesn't matter – but the bigger the bottle, the bigger the tornado. The bigger the tornado, the easier it will be to observe the effects on the water. [2] X Research source
- If you are only making a one-bottle tornado, you can use a plastic water bottle or a clear glass canning jar. [3] X Research source If you are making a larger two-bottle tornado, try using a pair of two-liter soda bottles.
- Try experimenting with more or less water. Record whether the amount of water has any effect on the size and speed of the tornado.
-
Add dish soap. Two squirts from a bottle of concentrated soap will do. You can also use oil, or anything hydrophobic (that repels water). [4] X Research source
- Don't try to use other cleaning products like bleach or non-liquid soap. Do not use laundry detergent: it is designed to interact differently with water than dish soap. [5] X Research source
- Try experimenting the amount of dish-washing soap, or the brand of dish-washing soap. See if a particular brand works better than another, or if more or less soap makes a difference.
Advertisement -
Add a pinch of glitter. This step is optional, but it may make it easier to see the tornado in action. Alternately, add food coloring for flair. If you're using a large bottle, try putting a few plastic Monopoly houses into the water to simulate the "houses" that are being picked up the tornado. [6] X Research source
-
Seal the bottle. If you are making a one-bottle tornado, you just need to twist the cap and seal it shut. If you are making a two-bottle tornado, you'll need to find a watertight way to fix the openings so that they face one another. Try using superglue, caulk, duct tape, or a large rubber band. [7] X Research source
-
Make sure that the bottle is sealed. The trick won't work well unless the container is completely airtight. Test the cap with your hand.
-
Spin the bottle. Hold it by the top or the bottom, and use your wrist to shake the water in a loose circular vortex. After a few seconds of spinning, you should see the water begin to swirl in the center. This is your "tornado." Ask questions:
- Why is it spinning? [8] X Research source
- Is the tornado spinning clockwise or counterclockwise?
- How does the glitter interact with the tornado?
-
Experiment. Try spinning the bottle slower or faster. Try spinning it upside down. Observe whether changing the spin pattern has any effect on how the tornado looks.
-
Learn why the water is spinning. It is responding to "centripetal force" – an inward-facing force that pulls an object or liquid toward the center of its circular path. [9] X Research source In this case, the water is spinning around the "center" of the vortex, which happens to be the center of the bottle because the bottle defines the size of the "body of water." [10] X Research source
-
Make sure that the two bottles are attached at the mouth. The connection should be airtight and watertight. Set the bottles upright so that the bottom of the full bottle is sitting on the ground or table, and the bottom of the empty bottle is sticking straight up into the air. Be sure to leave an inch or two of air at the top of the "full" bottle.
-
Flip the bottles upside-down. Think of it like the motion of flipping an hourglass. The bottom bottle should now be empty of water, and the top bottle should be full of water. Hold the bottles for support – the contraption will be top-heavy!
-
Watch the water trickle down. The air pressure in the now-top bottle is lower than the air pressure in the now-bottom bottle, so there should not be much water flowing between the mouths of the bottles.
-
Swirl the water-filled bottle in circles. If you gently spin the water-filled bottle on top, water should begin to pour again. This should create a vortex or "tornado" in the center of the water-filled bottle as the liquid flows from a space of low pressure to a space of high pressure.
Community Q&A
-
QuestionHow can I connect the two bottles without leakage?Community AnswerYou can seal it with a glue gun. If not, you can always use duct tape.
-
QuestionWhat type of dishwasher soap do you use?Community AnswerYou use dish soap, not dishwasher soap. But you can use any kind of dish soap.
-
QuestionCan you use oil instead of dish soap?Community AnswerNo. You cannot.
Video
Tips
- If you are creating a two-bottle tornado, be sure to hold the bottle tops so that they don't break.Thanks
- Try adding sprinkles. You could also use feathers or salt – anything that you think might get pulled up in the tornado!Thanks
- Try adding different things to the mixture such as oil and food coloring. Experiment with different liquids.Thanks
Tips from our Readers
- If you want to have fun with it and make it more realistic, try adding little plastic people or Legos, or use Lego doors and buildings. You can also add leaves or flowers or other items from nature.
- Spinning the bottles in a circular motion will create a nice tornado, but you can also experiment with different motions to see what other shapes you can create.
Warnings
- Things could get messy. Try creating this over a sink.Thanks
Things You'll Need
- One or two empty bottles: plastic or glass
- Dish soap.
- Food coloring (optional)
- Glitter, salt, or sprinkles (optional)
- Monopoly houses, marbles, or pebbles (optional)
Expert Interview
Thanks for reading our article! If you'd like to learn more about experiments with liquids, check out our in-depth interview with Jessie Antonellis-John .
References
- ↑ https://www.mottchildren.org/posts/camp-little-victors/tornado-bottle
- ↑ https://www.weatherwizkids.com/experiments-tornado-bottle.htm
- ↑ http://classroom.synonym.com/make-tornado-bottle-using-dishwashing-liquid-7965.html
- ↑ http://www.scienceworld.ca/resources/activities/tornado-maker
- ↑ http://news.wisc.edu/18253
- ↑ http://classroom.synonym.com/make-tornado-bottle-using-dishwashing-liquid-7965.html
- ↑ https://www.youtube.com/watch?v=IF2ZByWaUMI
- ↑ http://www.kidzone.ws/science/tornado/
- ↑ http://www.sciencekids.co.nz/experiments/makeatornado.html
About This Article
To make a fun tornado in a bottle, all you need is a plastic bottle and dish soap. Start by filling the bottle with water, leaving 2 inches of air at the top. Then, add 2 small squirts of dish soap. You can also pour in some food coloring or glitter to make a colorful tornado! Once you’ve filled the bottle, screw the cap on tight. Hold the bottle by the bottom and shake it in small circles to swirl the water around in a tornado. For more tips, including how to make a tornado with 2 big bottles, read on!
Reader Success Stories
- "This helped me in my science presentation in school!!! Great activity!"