Download Article
Download Article
Your sewing machine will work better if you oil and clean it regularly. It will also run more quietly. Most sewing machines require you to remove the fabric lint and threads that accumulate with each project and then apply drops of oil. It’s important that you only use sewing machine oil.
Easiest Way to Oil a Sewing Machine
Follow the instruction manual to disassemble all the parts of your machine. Clean the machine with a lint brush and compressed air before oiling, then put 1-2 drops of oil in the center of the bobbin area and on the hook race. Wipe away any excess oil with a cloth, then screw the needle plate back into the machine.
Steps
-
Follow the instructional manual. Each sewing machine brand is different, so it’s a good idea to check the manual that came with your sewing machine for directions on how to clean and oil it. Ensuring your sewing machine is oiled will keep the mechanics lubricated and running smoothly. [1] X Expert Source Andrea Beaulieu
Professional Tailor & Fashion Designer Expert Interview. 1 May 2020.- Some manufacturers recommend cleaning the machine after every 10 hours you use it. Clean it when you see lint starting to gather. Some older machines mark the spots where you should drop oil in red. Others tell you where to drop it using pictures to guide you.
- If you don’t have a copy of the instructional manual, you should be able to get one on the manufacturer’s website. You might even be able to download it. If that doesn’t work, call the manufacturer and ask for one. You will be asked the machine name, model, and serial number most likely. You could also ask a local dealer.
- Some machines do not need to be oiled. They are self-lubricating. Such a machine will still need to be maintained, but if it says not to oil it at home, don’t.
-
Go slowly. You want to make sure that you don’t use too much oil. It’s a good idea to use a little bit of oil, and see how it works. Then use more. Place a piece of newspaper under the machine while you work.- Oil small areas at a time. You should take apart small areas of the machine piece-by-piece to oil them. Study the instructional manual drawings first so that you understand the function and name of each part.
- Do not put oil on the needle, bobbin, presser foot, or plate, as it will stain your fabric. [2]
X
Expert Source
Andrea Beaulieu
Professional Tailor & Fashion Designer Expert Interview. 1 May 2020. - Disassemble the parts following the instructions in your manual. You will want to follow a process of cleaning the piece, brushing it out, and then lubricating each area.
- After you finish with each area of the sewing machine, you will want to put it back together, and then move on to the next part. Replace needles frequently. You will probably want to do this with each new project.
Advertisement -
Prepare the machine for cleaning. You should clean the machine before you oil it. First, turn off the machine and unplug it.
- Remove all of the extra pieces of the machine that will get in the way of a thorough cleaning. For example, remove thread, bobbin cases, plates, and the presser foot.
- Remove the stitch plate. If your machine has a bobbin hook, you should remove it because lint could be collected there. Remove the machine’s needle for safety purposes.
Advertisement
-
Take a small, stiff lint brush. You should be able to brush away the lint with the stiff lint brush. Brush away the lint that you can. Sometimes these small lint brushes and other cleaning materials will come with the sewing machine.
- To reach pieces of lint that are hard to sweep away because they are compacted, try using tweezers to remove them. It's essential that you thoroughly clean your machine before you apply the oil.
- Try using a soft cloth to wipe away any lint or residue on the bobbin hook. Some people also use clean mascara brushes or pipe cleaners for this process.
-
Use compressed air. You could clean parts of the machine with a can of compressed air. There are some cautions necessary with using compressed air, though.
- The problem with canned air is that it could blow lint deeper in the machine. To reduce this problem, hold the nozzle at least 4 inches (10.2 cm) away from the machine part, and spray air at an angle into the machine so it blows the lint out of the machine instead of into it.
- Use the air to clean the bobbin case area and the bobbin case itself. This is the area where the bobbin loads up. Stray dust should fall out. [3] X Research source Use the air to clean the bobbin case also.
- Clean under the needle plate also. You will have to unscrew the needle plate. Remove the plate. You will see dust inside of it. Spray the area with the compressed air. Clean any other parts as instructed by your sewing machine manual.
Advertisement
-
Buy sewing machine oil . You cannot use car oil. You need to buy oil that is specifically for sewing machines. Sewing machine oil is clear and comes in a small bottle. [4] X Research source- Your sewing machine may have come with a bottle of oil when you purchased it from the dealer or store.
- You can find this oil in sewing and fabric shops. This cannot be said enough. You cannot use any other oil than the oil recommended in your owner’s manual.
- Household oil or WD-40 will not work. Sewing machine oil is of different consistency than oil you’d put in a car. It’s clear and lighter.
-
Put drops of oil into sewing machine parts. You should only need a small amount of oil. Your owner’s manual will tell you where to drop it in the machine. It only takes a couple of drops.
- Generally, you will be told to squeeze a few drops of oil on the housing unit that the bobbin case sits in.
- Most machines want you to oil the shuttle hook (which is the thing that spins inside the bobbin casing). Often you will be told to drop oil inside the hook race and the housing of the sewing machine. That’s the silver ring that the bobbin hook fits into. Your machine will perform better and be quieter if you drop oil here because the two pieces rub together.
- You may also be instructed to put a drop of oil on the outer ring of the bobbin hook. This is where it slides along the hook race. [5] X Research source
-
Wipe away excess oil. Try to avoid getting any oil on parts of your sewing machine that will touch the fabric. However, if you do see any oil on the presser foot or plate, or on the needle or bobbin, use a cloth to wipe it away. Otherwise, that oil could end up on your fabric and thread. [6] X Expert Source Andrea Beaulieu
Professional Tailor & Fashion Designer Expert Interview. 1 May 2020.- If you use too much oil, you can run muslin through the machine, and then wipe the exterior of the machine. Use a damp, soapy towel. Let it sit. That way the oil will collect. Then, do it again. You might need to do this a few times over the subsequent days until all of the extra oil is not in the machine. [7] X Research source
- Test the machine. Before you start sewing a new project, make a few stitches on a piece of fabric you don’t care about. You want to see if any excess oil remains. Screw the needle plate back into the sewing machine.
-
Oil a Singer sewing machine. Remove the needle plate. Turn the handwheel towards yourself until the needle is fully raised and open the hinged front cover. Unscrew the needle plate screws. A screw driver will come with the machine. [8] X Research source- Clean the feed dog. Remove the bobbin. Use the brush supplied to clean the area. Remove the bobbin case. Snap the two hook retaining arms outwards. Remove the hook cover and the hook. Clean with a soft cloth.
- Lubricate the points in the instructional manual with 1-2 drops of sewing machine oil. Turn the handwheel until the hook race is in the left position. Replace the hook. Replace the hook cover, and snap back the hook retaining arms. Insert the bobbin case and bobbin and replace the stitch plate. [9] X Research source
Advertisement
Expert Q&A
Search
-
QuestionHow do you clean oil from a sewing machine?Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.Use a clean cloth to wipe the oil from the machine until the cloth comes away clean. After oiling your machine, always examine the presser foot, plate, needle, or bobbin carefully to make sure there's no oil present that could get on your fabric.
-
QuestionWhy do I need to oil my sewing machine?Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.It's important to follow the instruction for oiling your machine, as it keeps the mechanics lubricated and running smoothly.
-
QuestionWhat causes slipped stitches on top of the material?Community AnswerIt could be a few things. Perhaps the tension not correct? Both the upper and lower tensions play a tug of war. If you are getting a straight line on the bottom piece of fabric then the upper tension is too loose. If you see a straight line of thread on the top then the tension is too tight. When the tension is right you will see nice even stitches where they meet in the middle of the fabric like peanut butter between 2 slices of bread. Also check the needle to make sure the flat side is towards the back, and also make sure the needle is not bent. So with this being said I would check the needle out first before adjusting tensions.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Small vacuum attachments can sometimes work for cleaning out lint.Thanks
- It’s a bad idea to use your breath to try to blow lint out of a sewing machine because of the moisture in your breath.Thanks
- Shine a flashlight on any areas you may have trouble seeing.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Sewing machine oil
- Soft cloth
- Newspaper
- Tweezers
- Sewing machine manual
- Lint brush
References
- ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 1 May 2020.
- ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 1 May 2020.
- ↑ https://www.youtube.com/watch?v=4AYV3hbqF4U
- ↑ https://www.youtube.com/watch?v=P-xzmK3PS40
- ↑ https://www.youtube.com/watch?v=P-xzmK3PS40
- ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 1 May 2020.
- ↑ https://www.youtube.com/watch?v=PgGjc0PtJGM
- ↑ https://www.youtube.com/watch?v=rZfOWkvEJ9I
- ↑ https://www.youtube.com/watch?v=ejlfcOwFpFY
About This Article
Article Summary
X
To oil a sewing machine, start by turning off and unplugging the machine, and consult the manual to see where you can put the oil. Remove extra pieces from the machine, like thread, bobbin casings, the needle, the presser foot, and the stitch plate. Wipe the various compartments with a small, stiff brush to remove lint, and put a few small drops of oil on the moving parts of the machine. Most machines require oil in the bobbin housing unit and the shuttle hook. Wipe away any excess oil with a cloth. If you want to learn how to clean your sewing machine with compressed air, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 497,109 times.
Reader Success Stories
- "During the Covid pandemic, I wanted to make masks. I had NEVER oiled or cleaned my machine in 30 years I've owned it (mostly I never USE IT). It sounded like a lawn mower when I used it so I followed the instructions here and smooth as silk. Thanks." ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"During the Covid pandemic, I wanted to make masks. I had NEVER oiled or cleaned my machine in 30 years I've owned it (mostly I never USE IT). It sounded like a lawn mower when I used it so I followed the instructions here and smooth as silk. Thanks."
..."
more
"It's the only information I could find on how to oil a sewing machine. Even my sewing manual was not much help. I really liked the pictures. They were very helpful. I didn't know about wikiHow before. I will tell my sewing group. Thank you!"
..."
more
"It says to use the proper oil and just in one place. l probably would have oiled the screws. It was great information and easy to see. Thanks."
..."
more
"What helped me most was the video showing how to dust and clean plus oil the machine. It as very useful."
"wikiHow is very helpful. I always get a clear idea about whatever new things come in my mind."
