PDF download Download Article PDF download Download Article

A broken latch is a hassle and makes it impossible to get underneath your hood and fill your oil, jump-start your battery, and refill wiper fluid. If your hood isn't opening because of a broken release wire, you can often pull the wire yourself from inside the car. But if the latch is broken, you'll need to get your hands a bit dirty. Luckily, it's fairly simple to do and can bide you some time before you bring your car in for repair.

Part 1
Part 1 of 2:

Finding the Latch

PDF download Download Article
  1. Always let your engine cool off before you start poking around underneath the hood. If you used your vehicle recently, about 30 minutes should be enough. Without cooling, you risk burning yourself.
    • If you can feel the heat of the engine against your car grill or bumper, talk to a mechanic about overheating .
  2. If your car requires a release to open, locate it within your vehicle. In most cases, it's underneath the dashboard left of the steering column. Pull or press it and it should lift the hood 1 to 2 inches (2.5 to 5.1 cm) without completely disconnecting it from the latch. [1]
    • If you can't find the hood release, look at the driver's manual provided by your manufacturer. Either find the physical copy or look on their website for your car model's manual in electronic format.
    • If the hood release doesn't open your hood, the wire is probably broken .
    Advertisement
  3. If you have a mechanic's creeper—a mobile seat that helps you move while lying on your back—use it to roll yourself underneath the vehicle. If not, shimmy underneath on your back directly underneath the hood. At this point, you should be able to see a small hole with a small metal latch hanging down towards you. [2]
    • Give the ground a quick sweep before going under your car and wear clothes you don't mind getting dirty.
  4. If your vehicle has a grille with big enough openings, locate the broken latch from the front of your vehicle. Crouch down and look for the small metal latch directly underneath the spot where the front-center of the hood meets the car frame. [3]
    • If you're having trouble, follow the release cable—it connects to the latch from the driver's side of the car.
  5. Depending on the vehicle, you might be able to remove the grille without opening the hood. However, this only works for select models—refer to your vehicle's owner's manual or visit your manufacturer's website and locate information on hood removal. If you can access the screws holding your grille in place, you should be able to remove them with a Phillips head screwdriver. [4]
    • If you can see the latch and access it with a screwdriver, don't bother removing the grille.
    • Unscrew and remove the parking lamps and turn signal lights before attempting to remove the grill.
  6. Advertisement
Part 2
Part 2 of 2:

Tripping the Latch

PDF download Download Article
  1. Reach toward the latch with a metal tool that is long enough to reach the latch—at least 10 inches (25 cm) should do the trick. Insert the metal piece in-between the latch and the metal piece it's hooked onto. Now, trip the latch by pressing it away from the hood. [5]
    • If you're having trouble, check the direction of the wire running from the latch—this is the direction you need to push the latch.
    • If the hood does not open after tripping the latch, bring your car to a mechanic.
  2. Purchase a spray lubricant—ideally lithium-based—with a bendable straw at the nozzle at least 8 inches (20 cm) long. Insert it into your grill or from underneath your car and apply it generously to the latch. Often, broken or stuck latches can be remedied with lubrication. [6]
    • Be sure to wear safety goggles if you apply the lubricant from underneath the car.
    • Never use silicone spray as it can contaminate the oxygen sensor and impair engine performance.
  3. In many cases, latches don't work properly because they become misaligned. After locating the latch, loosen the bolts that hold it in place just enough that you can move it. Move it side-to-side so it aligns with the opening in the inner panel of the hood. Now, move the latch up and down until it fits flush between the fenders and the top of the hood while the hood is pressed upward. Finally, tighten the latch bolts.
    • Open and close your hood afterward to ensure it works properly.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Things You'll Need

      • Work gloves
      • Lithium spray lubricant with nozzle
      • Safety goggles
      • 10 inch (25 cm) Phillip's head screwdriver
      • Flashlight

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance, check out our in-depth interview with Matthew Rava .

      About This Article

      Thanks to all authors for creating a page that has been read 292,836 times.

      Reader Success Stories

      • Kate

        Nov 24, 2021

        "Now I know how to open the hood of my Dodge Caravan. Thank you."
      Share your story

      Did this article help you?

      Advertisement