PDF download Download Article PDF download Download Article

If you are tired of your bat's color, and have a little imagination and time, try changing it! These steps are directed at painting wooden baseball bats, but can be used with some adjustment on aluminum bats as well.

  1. Most painting projects have better success if they are thoroughly planned. Decide how you want your bat to look when you are finished, what colors you will use, and how long you will need to protect it for the paint to cure.
  2. You will want to use a good quality paint that won't chip, fade, or peel, so you will probably want to use an enamel, epoxy, or polyurethane paint for this project. These are available in aerosol cans, which are easy to use and offer a wide variety of colors.
    Advertisement
  3. Wood bats have a manufacturer's label that should not be covered if it can be avoided, since this helps the batter orient the bat so the proper side is used to contact the ball upon swinging it, but if the bat is being painted to display, and not use, this will not be an issue.
  4. Lightly sand the finish so the new paint will adhere properly. Use a smooth sandpaper, depending on how rough the condition of the bat is when you are beginning. For a bat in good condition, a 200 or 220 grit sandpaper, and move to a fine steel wool to give it a smooth texture before painting. Start with a coarser grit if there is damage you will want to buff out.
  5. Use masking tape to protect any surfaces, such as gripping surfaces on the handle, or the label, that you do not want to paint over.
  6. Wood does not paint exactly the same as metal, so a primer/sealer is probably a better choice than a rust inhibitor metal primer, but for best results, an enamel undercoat can be used. This is a product used by professional painters for durability and performance under a variety of conditions, so it is up to you to decide if your bat is worth the investment. If not, use any exterior grade spray primer.
  7. Wipe away any dust, using a tack cloth or a rag dampened with mineral spirits, then allow to dry.
  8. Keep the paint spray moving, holding the can about 10 inches (25.4 cm) from the surface, and watch for drips or runs. Using several light coats will often gives better results than one heavy coat.
  9. Apply any new decals, striping, or other embellishments when you are finished.
  10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What changes would I need to make to this procedure to paint an aluminum bat?
    Ashton Gilmore
    Community Answer
    Start by roughing up the surface with sand paper to help the paint adhere, then apply a primer meant for metal. Once the primer is dried, apply your paint. When the paint is dried, use a tough layer of protective sealant to prevent chipping. Remember that paint will be more prone to being scratched off of a metal bat rather than a wooden one.
Ask a Question
      Advertisement

      Tips

      • You can purchase new grip tape for the portion of the bat you grip when swinging it, and install this after your paint cures.
      • You may choose to drill a small hole and insert an eye screw in the end of your bat so you can hang it up at a comfortable working height while painting.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • A Baseball Bat
      • Spray Paint
      • Sandpaper
      • Fine Steel Wool

      About This Article

      Thanks to all authors for creating a page that has been read 85,362 times.

      Did this article help you?

      Advertisement