Download Article
Download Article
Thermostats such as the Lux 500, the Smart Temp 9000, TX1500, Lux HP2110 are functional energy saving tools, but when the thermostat's schedule gets out of sync you could find yourself shivering unnecessarily. Follow these instructions to reprogram it to the schedule you want.
Steps
-
Open the thermostat and press "reset" with an open paperclip or other small pointy object. [1] X Research source
-
Set the correct time and day by turning the dial to the "Day / Time" position. Press "Up" to change the date. Press "Next" to set the time and then use the "Up" and "Down" keys to select the correct time. [2] X Research sourceAdvertisement
-
Move the dial to "Set Weekday Program".
-
Decide what temperature you want at various times of the day. The default heating temperatures are 6 AM - 70ºF, 8:30 AM - 60ºF, 3 PM 70ºF, and 11 PM 65ºF. [3] X Research source
-
Change the start times by pressing "up" and "down".
-
Press "Next" to set the desired temperatures using the "up" and "down" keys.
-
Continue changing the times and temperatures till you are satisfied with all 4 modes for the weekday schedule. [4] X Research source
-
Repeat steps 4-7 for the weekend schedule after turning the dial to "Set Weekend Program."
-
Turn the dial to Run and close the cover. Switch on the "Heat" or "Cool" as appropriate.
Advertisement
Community Q&A
Search
-
QuestionHow do I change the battery? In the display window it says "low battery." What should I do?Community AnswerRemove the cover carefully, more than likely it snaps on at the bottom and hangs and pivots from two little fingers at the top, pull out on the snaps at the bottom and it should lift off at the top. Now you can see the batteries to tell what type they are. Replace them and mark the date down somewhere, they will need to be replaced in about a year.
-
QuestionHow do I reset a lux thermostat?Community AnswerTo unlock the thermostat without the lock code, press the RESET button. After pressing RESET then within the next 4 seconds press the UP button 3 times then the DOWN button once. This will reset the lock code to 0000. Replace thermostat batteries with fresh AA size Duracell® or Energizer® alkaline batteries.
-
QuestionHow do I set the heat temperature?Community AnswerOn the side, there should be a green button with an arrow facing upwards and a red arrow facing downwards. The green is to get hot, and the red is to get cold.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- The above instructions were tested successfully using the Lux 500. Other models are slightly different, but follow the same principals.Thanks
- For more detailed instructions turn to the Lux website and download the detailed instruction guides: http://www.luxproducts.com/support.phpThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about heating and cooling, check out our in-depth interview with Victor Belavus .
References
About This Article
Thanks to all authors for creating a page that has been read 193,124 times.
Advertisement