Download Article
Download Article
Anchor screws allow you to hang heavier items on your walls or hang items where there is no wall stud to support the nail. When they're installed correctly, anchor screws can support pieces that weigh up to 70-pounds, so they're great for heavy frames, paintings, and mirrors. To put anchor screws into your wall, you need to select the proper anchor and then install it in the location you've selected to hang your item.
How to Put a Screw In with an Anchor
Weigh your item before hanging it to ensure you choose an anchor with enough weight allowance. Then, choose a proper anchor for your wall material based on whether it’s plaster, drywall, concrete, or brick. Use a drill to drive a pilot hole into the spot where you insert the anchor in the wall by hand.
Steps
-
Determine what type of wall you will be installing the anchor on. What is it made out of? Different types of walls will require different types of anchors and may require a different installation process.
- Plaster walls begin as wooden frames that have been constructed from narrow strips of wood cut from a lathe. These frames are then coated with several layers of plaster until the desired density is achieved. Plaster wall was the standard during the early 1900s. [1] X Research source
- Drywall is made from a plaster sheet that has been sandwiched between paper. Drywall became popular in the United States and Canada during the late 1950s as a lighter-weight replacement to plaster wall. [2] X Research source
- Brick and mortar, and concrete walls are also common.
-
Weigh the object. This is the second most important factor to consider when selecting the proper type of wall anchor.
- Cabinets, because of the way that they hang, put more stress on an anchor. It is therefore not recommended to hang a cabinet with an anchor. Depending on the size of the cabinet, you may find a smaller piece that will work with an anchor.
Advertisement -
Plan where you want to hang your picture frame or mirror. The angle that you will be installing the anchor and the weight of the object being hung will affect which type of anchor you should use. The amount of stress on an anchor affects how much it can support.
-
Select the proper anchor screw. This can only be done if you know ahead of time what type of material the anchor will be screwed into, the approximate weight of the object being hung, and angle of the anchor (as in the case of a ceiling).
- Plaster wall: anything under 20-pounds can be hung with a plastic expansion anchor . Use a molly bolt for anything weighing more than 20-pounds.
- Drywall: use a threaded anchor screw for anything weighing less than 20-pounds. Anything weighing more should be anchored with a molly bolt . Hanging anything more than a few pounds--such as a smoke detector--is not recommended on drywall ceilings.
- Concrete or brick and mortar walls require expansion anchors . Be sure never to install any anchors in-between seams of concrete or brick. Anchors should only be installed in the brick or stone itself, ever in the grout. The amount of weight that the anchor can hold will be determined by the strength and condition of the wall itself (e.g., old brick and mortar walls that are in poor condition tend to be brittle and can crumble; this directly impacts how much weight an anchor can support).
Advertisement
-
Determine exactly where you want your picture frame or mirror to hang. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
-
Make a small pencil mark where the center of the screw will go. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Use a level to measure the spot for your second anchor. Make another small pencil mark where the second anchor will be installed.
- You can also apply a bit of grease or lipstick on the hooks of the item you will hang. Place the item where you want it on the wall and gently press it against the wall. The grease or lipstick will leave a mark to show you where to install your anchors.
-
Drill a hole in the spot(s) you marked. Be sure that you hold the drill perpendicular to the wall so that the anchor will sit parallel to the ground: an anchor that is not installed straight will not be able to support as much weight. You should drill a hole that is approximately the same size as the anchor itself (the screw will force it to expand outward). [3] X Research source
- Make sure the hole you drill is deeper than the anchor is long.
-
Slide the expansion anchor into the hole. If the hole is too small, the anchor will collapse onto itself and may not install properly. Push it in until the anchor sits flush against the wall. Do not bang on the screw because it could bend or break.
- If needed, tap the anchor with a rubber mallet lightly to get it to sit flush against the surface of the wall.
-
Screw the support screw into the anchor. Line up the screw and the anchor and, using either a philips or flat head screwdriver, turn the screw clockwise just until the base of the screw comes to rest against the base of the anchor.
- If the object you are hanging has a mounting bracket, you may need to slide the screw through the bracket before screwing it into the anchor.
-
Back the screw out slightly by turning it counter-clockwise. Be sure to leave just-enough of the screw exposed to "catch" the hanger on the back of picture frame or mirror. A good rule of thumb is to leave about a 1/4" of screw exposed for hanging.
Advertisement
-
Determine exactly where you want your picture frame or mirror to hang. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
- Threaded anchor screws are mostly used in drywall.
-
Make a small pencil mark where the center of the screw will go. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Make another small pencil mark where the second-anchor will be installed (in-line with the previous mark, spaced the same distance as the hooks on the picture farm or mirror).
-
Place the tip of the threaded anchor on the spot you marked. Because these anchors are self-threaded you do not need to pre-drill any holes. [4] X Research source
- Although this is not absolutely necessary, you can use a nail to make a tiny indention on your mark. This indentations will hold the tip of the anchor as you begin screwing it into the wall.
-
Screw the anchor in using a screwdriver. You will have to use a drill to install the anchor. Be sure to hold the screwdriver or drill perpendicular to the wall to ensure that the anchor is installed perfectly straight.
- Clockwise is "in."
- Make sure you are applying enough pressure to allow the threads to catch. Otherwise, the tip of the anchor will keep spinning in place. [5] X Research source
- Screw the anchor in until it rests flush against the wall.
-
Screw the support screw into the anchor. Line up the screw and the anchor and, using either a philips or flat head screwdriver, turn the screw clockwise just until the base of the screw comes to rest against the base of the anchor.
- If the object you are hanging has a mounting bracket, you may need to slide the screw through the bracket before screwing it into the anchor.
-
Back the screw out slightly by turning it counter-clockwise. Be sure to leave just-enough of the screw exposed to "catch" the hanger on the back of picture frame or mirror.
Advertisement
-
Determine exactly where you want your picture frame or mirror to hang. If your picture frame or mirror has a wire-hanger in the back, be sure to take into account the amount of slack when figuring-out where you want the picture or mirror to hang.
-
Make a small pencil mark where the center of the screw will go. If the picture frame or mirror has multiple hooks on the back, be sure to measure the distance between them. Make another small pencil mark where the second-anchor will be installed (in-line with the previous mark, spaced the same distance as the hooks on the picture farm or mirror).
-
Drill a hole in the spot(s) you marked. The hole should be slightly larger than the molly bolt. You can measure it by folding the wings and measuring its width. As the molly bolt is screwed in its wings will compress and create tension, filling any gap. [6] X Research source Be sure that you hold the drill perpendicular to the wall so that the anchor is installed perfectly straight. All wall anchors should be installed parallel to the ground.
- Make sure you hole you drill is deeper than the anchor is long.
-
Insert the screw into the bolt. Unlike the other two types of anchors, which require the anchor and the support screw to be installed separately, the molly bolt and screw are installed at the same time. Prepare the molly bolt by screwing the support screw into the winged-bolt.
-
Screw the bolt in using a screwdriver. Be sure to hold the screwdriver perpendicular to the wall as you are turning it clockwise. This will help ensure that the anchor is installed perfectly straight.
Advertisement
Expert Q&A
Search
-
QuestionHow do I calculate the anchor bolt capacity for a wall mounted object?Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.The anchor bolt will state the maximum weight that it can hold, so check the product's packaging before installing it.
-
QuestionI asked my guy who installed a mantel on my brick veneer fireplace how to install a mirror and he said buy so anchors; what are so anchors?Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.In this instance, I would recommend using a hollow anchor to install a mirror.
-
QuestionHow do I apply anchored screws into the wallMark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.Follow the directions above and make sure that you don't over-tighten the anchored screws.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- When adding an anchor to drywall, you don't need the drill & bit. All you need to do is screw the screw into the drywall (slowly, so as not to go crooked & making the hole wider than needed), and then back it out, then tap in your anchor, and insert the screw into the anchor.Thanks
- If a metal anchor is too long and won't drill into the drywall flush, drill the hole initially and then snap off the teeth at the end of anchor with a pair of pliers. This should give you some more room.Thanks
- To fasten an anchor in stone or cement, carve small wooden wedges and pound them into the drilled hole.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure you're not drilling directly above an outlet, switch, or back side of a plumbing pipe. While drilling, if you hit a metal plate, that is an indication not to go any further (as it usually covers electrical work or plumbing).Thanks
- When drilling into concrete you need to use a hammer drill.Thanks
- If the item is really heavy, you may want to use butterfly nuts instead.Thanks
- If the item is really light, it can be hung on small nails & poster can be hung with stick pins. You can also find double-sided tape that can work for small items.Thanks
- If the picture, etc. to be hung is heavy, do NOT use the curled hooks shown, which are mainly for hanging lightweight coffee mugs. Instead, use one or two special picture hooks. These hooks are shaped so that the screw is angled downward to better resist breaking off under the weight. In this case, the insert sleeve hole must also be drilled at the same angle.Thanks
- Be sure to use round head screws, and not flat head type.Thanks
Advertisement
Things You'll Need
- Screws
- Anchors
- Drill & bit (see "Tips")
- Hammer or rubber mallet
- Pencil
- Level
- Tape measure
- Safety glasses
References
- ↑ https://home.howstuffworks.com/drywall-vs-plaster.htm
- ↑ https://home.howstuffworks.com/drywall-vs-plaster.htm
- ↑ https://www.thisoldhouse.com/toh/article/0,,203389,00.html
- ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
- ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
- ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
- ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
- ↑ https://www.doityourself.com/stry/how-to-install-molly-bolts#b
- Videos provided by Ultimate Handyman
About This Article
Article Summary
X
Before you put an anchor screw in a wall, find out what the wall is made of and how heavy the item you plan to hang is so you know which type of anchor to use. Choose an expansion anchor if you have a plaster wall and want to hang something less than 20 pounds. To install the anchor, drill a hole in the wall that's deeper than the anchor is long, then slide the expansion anchor into the hole. Finish by screwing the support screw into the anchor, but remember to leave enough of the screw exposed to hang your picture frame on. To find out how to install a threaded anchor or molly bolt, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,511,322 times.
Reader Success Stories
- "Very helpful because it doesn't assume that you already have experience with the items and techniques used. The details are thorough without being demeaning; for example, reminding the user to choose rounded screws instead of flat ones. I will check here the next time I need this type of information. " ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Very helpful because it doesn't assume that you already have experience with the items and techniques used. The details are thorough without being demeaning; for example, reminding the user to choose rounded screws instead of flat ones. I will check here the next time I need this type of information. "
..."
more
"Showed me how to put in anchors. I usually make big holes in my walls trying to put them in, and when I start screwing in the screw, the anchor pops out of hole. Very good site. "
..."
more
"It showed me how to install the anchor and screw. "
"Very good primer for wall hanging."
"Very detailed, thank you. "
