How to Read Architect's Drawings

PDF download Download Article
PDF download Download Article

The first requirement in constructing a building project is to understand architectural drawings, which are also called blueprints, or plans. If you want to know how to read these drawings and understand exactly what they mean, just follow these steps.

Part 1
Part 1 of 4:

Reading the Basics

PDF download Download Article
  1. This will contain the project name, the architect's name, address, and contact information, the project location, and the date. This page is very similar to the cover of a book. Many cover sheets will also include a drawing of the finished product, showing you what the house will look like after it is constructed and landscaped.
  2. These pages will include an index of plan sheets, and sometimes their contents. It also will include an abbreviation key, a scale bar with the plan scale indicated, and occasionally design notes.
    Advertisement
  3. This will have an area map, with an enlarged location map, usually giving enough information to locate the project site from nearby towns or highways. This sheet is not found in all sets of plans.
  4. These pages usually are numbered starting with a " C ", such as Sheet "C 001", "C 002, " and so on. The site plans will contain several sheets which show the following information:
    • Topographical information. This will provide the builder with information regarding the topography, or the slopes or flatness, of the site.
    • The demolition plan. This sheet (or sheets) will show the structures or features which will be demolished on the site prior to grading for construction. The items which will not be demolished, such as trees, will be noted in the keynotes.
    • The site utility plans. These sheets will indicate the location of existing underground utilities, so that they can be protected during excavation and construction.
    5. Advertisement
Part 2
Part 2 of 4:

Reading Architectural Sheets

PDF download Download Article
  1. If you cannot locate anything on the drawing with the dimensions given, get more dimensions from the Architect.
  2. These sheets will usually be numbered " A ", such as "A 001" , or A1-X, A2-X, A3-X and so forth. These sheets will describe and give measurements for the floor plans, elevations, building sections, wall sections and other oriented views of the building design. These sheets are broken up into many parts that make up the construction document that you will need to understand. The parts you'll need to know are described in the steps below.
  3. These sheets will show the location of the walls of the building, and identify components like doors, windows, bathrooms, and other elements. There will be dimensions noted as distances between, or from center to center of walls, width of openings for windows and doors, and changes in floor elevations, if the floor is multilevel.
    • Floor plans consist of various levels of detail depending on the stage of the project. At stage D (planning) drawings may show only the major features of the space.
    • At a tender stage, drawings will be more detailed, illustrating all features of the space at a larger scale to allow a contractor to price the job.
  4. Here, the architect will show the types, heights, and other feature of ceilings in different locations in the building. Ceiling plans may or may not be depicted for residential design projects.
  5. These pages will indicate the layout for joists, rafters, trusses, bar joists, or other roof framing members, as well as decking and roofing details.
  6. This is usually a table listing the different finishes in each individual room. It should list paint colors for each wall, flooring type and color, ceiling height, type, and color, wall base, and other notes and details for constructing the finish in areas listed.
  7. This table will have a list of doors, describing the opening, "hand" of doors, window information (often keyed off of the floor plan, example, window or door type "A", "B", etc.). It may also include installation details (cuts) for flashings, attachment methods, and hardware specifications. There may also be a separate schedule for window and door finishes (although not all projects do). A window example would be "Mill finish, aluminum", a door might be "Oak, natural finish".
  8. This may include bathroom fixture layouts, casework (cabinets), closet accessories, and other elements not specifically noted on other sheets. Such as, but not limited to: concrete details, door and window details, roofing & flashing details, wall details, door details, deck to wall details and others. Every project is different and may or may not include what other projects have. The Level Of Detail (LOD) is determined by each Architect for each project. The growing trend is for Architects to have more, rather than less detail, because the Contractors then have less guesswork and can more easily understand what to include and what to price. Some builders may or may not have comments about the LOD, but that has no relevance to what the licensed Architect who is designing the project feels is necessary to properly explain the design.
  9. These are views from the exterior, indicating the material used in exterior walls, (brick, stucco, vinyl, etc), the location of windows and doors from a side view, the roof slopes, and other elements visible from the exterior.
    10. Advertisement
Part 3
Part 3 of 4:

Reading the Remaining Plans

PDF download Download Article
  1. The structural plans usually are numbered beginning with " S ", as in " S 001 " These plans include reinforcement, foundations, slab thicknesses, and framing materials (lumber, concrete pilasters, structural steel, concrete block, etc). Here are the different aspects of the structural plans that you will need to read:
    • The foundation plan. This sheet will show the size, thickness, and elevation of footings (footers), with notes regarding the placement of reinforcing bars (rebar). It will note locations for anchor bolts or weld plate embeds for structural steel, and other elements.
      • A footing schedule is often shown on the first sheet of structural notes, as well as notes regarding the reinforcing requirements, concrete break strength requirements, and other written statements for structural strengths, and testing requirements.
    • The framing plan. This will indicate the material used for framing the building. This may include wood or metal studs, concrete masonry units, or structural steel.
    • The intermediate structural framing plans. These are used for multistory construction, where each level may require support columns, beams, joists, decking, and other elements.
  2. Plumbing drawing pages are numbered beginning with " P ". These sheets will show the location and type of plumbing incorporated in the building. Note: often, home design documents do not include plumbing plans. Here are the parts of the plumbing plan that you will need to read:
    • The plumbing rough-in. This sheet will show the location of pipes which are to be "stubbed up" to connect the plumbing fixtures to water supply, drain/waste, and vent systems. This is rarely incorporated into a residential set of documents, such as for a single family residence.
    • The plumbing floor plan. This sheet will show the location and type of plumbing fixtures, as well as the route pipes will be run (overhead or through walls) for potable water and drain, waste, and vents. These plans are included although most architects (for single family homes) already indicate the location of the plumbing fixtures on their floor plans.
  3. Mechanical pages are numbered beginning with " M ". This sheet or sheets will show the location of HVAC (heating, ventilation, and air conditioning) equipment, duct work, and refrigerant piping, as well as control wiring. This is rarely indicated for single family homes.
  4. The electrical drawings are numbered beginning with " E ". This sheet (sheets) shows the location of the electrical circuits, panel boxes, and fixtures throughout the building, as well as switchgears, subpanels, and transformers, if incorporated in the building.
    • Special pages found in the electrical plan pages may be "riser" details, showing the configuration of power supply wiring, panel schedules, identifying specific breaker amperages and circuits, and notes regarding types and gauges of wires and conduit sizes.
    • Some of this information may or may not be included in single family home documents.
  5. These are also known as BMP (Best Management Practices) drawings. This sheet will indicate protected areas of the site, erosion control plans, and methods for preventing environmental damage during construction. There may be details in the BMP drawings showing tree protection techniques, silt fence installation requirements, and temporary storm water drainage measures.
    • The requirement for a BMP plan originates under the environmental protection department of your local, state, or national governing authority. This may not be required, depending on the Authority Having Jurisdiction for single family homes.
  6. Dimensions are rarely given and it is the responsibility of the builder to coordinate the placement of the utility so as to conform with the building code and the Architectural drawings. Be sure plumbing is located so that it matches up with the desired location of plumbing fixtures. Same goes for electrical wiring for power outlets and light fixtures.
    7. Advertisement
Part 4
Part 4 of 4:

Gaining a Deeper Understanding of Architect's Drawings

PDF download Download Article
  1. To do this, you will have to locate the element of construction you are reviewing to implement a portion of your work. If you are laying out the location of the building, you will first look at the site plan for location of existing buildings, structures, or property lines so you have a reference point to begin measuring to your building footprint. Some plans simply give a coordinate grid position using northings and eastings, and you will need a "total station" surveyor's transit to locate these points. Here is what you'll need to do to lay out a building footprint from the plans:
    • Lay out your building on the site by either the above referenced plan or the measurements given on the site plan. Measure to locations, preferably corners, on one side of the building, and check for any "checkpoints" to verify the accuracy of your layout. If you cannot absolutely establish an exact building line, you may have to suppose the location is correct and continue. This is widely accepted in cases where the site is very large, allowing for tolerance, but on a crowded lot or site, the location must be exact.
    • Establish the elevation you will work from. This may be a height relative to a nearby roadway, or an elevation determined from sea level. Your site plan or architectural floor plan should have a bench mark (a bench mark refers to some item, such as a manhole lid or survey waypoint with a known elevation) elevation or a "height above existing grade" as a starting point.
    • Use your plan to measure the location of each corner of the building, including offsets. Remember what exact element of construction you are using for your layout. You may mark an outside wall line , a foundation line , or a column line , depending on the type of construction and the most practical element for making subsequent measurements.
      • For instance, if you are building a structural steel building with I-beam columns which require setting anchor bolts to secure them, you may begin your building layout with the centerline of these columns, where if you are building a wood-framed residential structure with a monolithic slab floor, the edge of the slab would be your best choice for the initial layout.
  2. Reference the description of various sheets to find an element of construction you are going to use in the work you will perform. Plumbers use the Architect's floor plan to locate walls so the pipes they stub up will be concealed inside the wall cavity when the building is constructed, then use their plumbing floor plan to find out what types and sizes of pipes are required to service a particular fixture.
  3. As a rule, architectural plans are drawn to a "scale". An example would be, 1 inch (2.5 cm) equals 10 feet (3 m) (1"=10'), so measuring between to walls on the plan sheet means for each inch, the distance is 10 feet (3.0 m). A scale rule will make this much easier, but be careful to match the rule scale to the plan's scale. Architects often use a scale of fractions, such as a 1/32 scale, engineers usually use an inch per foot scale. Some plans or details are not to scale, and should be marked "(NTS)".
  4. Often a particular element has special considerations which are more easily described verbally than drawn, and notes are a tool the architect will use to illustrate them. [1] You may see a table of notes on the side of a sheet, with numbers identifying the note location on the plan (a number with a circle, square, or triangle around it) and a corresponding numbered statement describing the situation on the side of the sheet.
    • Sometimes there may be a single sheet or several sheets of Numbered Drawing Notes that consolidate all or most of the drawing notes for an entire set of drawings. Many Architects organize these numbered notes into a CSI (Construction Specifications Institute) method utilizing 1-16 or even more Divisions that categorize the drawing notes into subsections.
    • For instance: a note "4-127" may refer to a type of Masonry, as Division 4 represents Masonry. A note 8-2243 may refer to a window or door component, because Division 8 is Doors & Windows.
  5. You should have a specific keynote table for section of plans, and this will provide information on the abbreviations, symbols, and specific lines used in each section of the plans.
    • An example would be that the electrical plans, a circuit may have the "home run" "leg" (the wire going from the first junction box in a circuit to the panel box (the power source) highlighted or in darker ink than other circuits, and exposed conduits may be indicated by a solid line, and concealed conduits by a dotted or broken line.
    • Because there are many different line usages indicating different type walls, piping, wiring, and other features, you will have to see individual plan page "key notes" to understand them.
  6. These are calculators which add feet and inches, fractions, or metric measurements. Often, an architect will not give a measurement to a specific plan item, from a baseline such as the "' OBL " (outside building line), so you will need to be able to add the distances each feature which has a measurement provided, to get the total distance.
    • An example would be finding the center line of a bathroom wall to locate the potable water pipe stub up. You may have to add the distance given from the OBL to the living room wall, then the distance to a hallway wall, then across a bedroom, to the bathroom wall in question. This might look like this: (11' 5 ) + (5' 2") + (12' 4")= 28' 11.
  7. If you have a set of architectural plans in an electronic form, as on a CD, you will need a version of the original "cad" program which created it to open the files. "AutoCAD" is a popular, but very expensive, professional design program, and the designer will usually include a "Viewer" on the disc which you can install on your computer to view files, so that actual plan pages appear on your screen, but without the full program, you cannot manipulate design components or change the drawings. However, most Architectural firms know how to save their CAD and other computerized files as a PDF, which they will normally e-mail to you and you will be able to open and view (although not alter, as the Architects are responsible for the integrity of their work).
  8. These sets of documents are often very large sheets, about 24" X 36", and full construction sets may include dozens, or hundreds of pages. They are either bound or stapled on the left edge, and allowing them to be torn from the bindings, ripped apart by mishandling, laid out in the sun to fade the ink, or left in the rain can make them difficult to use.
    • These documents can cost hundreds of dollars (US) to replace, so try to protect them, and have a flat, wide, protected work surface to unroll and read them on.
  9. Specifications are usually printed and kept in a binder, and they list descriptions of methods and materials used in the project, as well as testing methods, quality control information, geotechnical data, and other information useful in building the project. However, some Architects do include the specifications on the drawing sheets (to insure that the specs will not be misplaced).
    • Specifications are the architect's way of indicating the quality standards, materials, model numbers, and other characteristics of projects. Even single family homes often have specifications. Specifications are traditionally arranged in numbered sections, typically Division 1-16, although these numbers have expanded considerably during the last decade.
    • Many Architects number their paragraphs so that they can cross-reference actual verbiage from the specifications onto their drawings using the paragraph numbers, which improves the coordination of the various trades.
  10. These may indicate portions of work which are incorporated in the Architect's drawings, but not necessarily in the builder's contract to construct, supply, or install. "NIC" is an abbreviation for Not In Contract, which means a certain item will be put in a certain place by the owner after the project is finished.
    • "OFCI" or "GFCI" (Owner Furnished, Contractor Installed, or Government Furnished, Contractor Installed) indicate the item is supplied by the customer, but installed by the contractor. Read and understand all abbreviations used in your plans.
  11. Architects may issue addenda, which are changes made to the documents after they have been released for bidding. Many Architects locate a blank section, often in the lower right corner of their sheets, just above the sheet number, reserved for a list of Revisions. Revisions are often numbered and enclosed within a triangle, octagon, circle or other consistent symbol. To the right of each revision number will be the date of the revision, then to the right of that, a brief description of the revision. Then on the drawing area of the sheet, that numbered symbol will appear in the area where the revision was made, often along with a "revision cloud", which is usually depicted with a lumpy series of arcs resembled a cartoon cloud, encircling the area in which the revisions where made. This allows everyone to understand exactly what has changed. Also, the Architect will normally issue an e-mail summarizing the revisions contained in each addendum, sent simultaneously to the Owner and registered bidders. It is then up to the various bidders to convey this information change to their subcontractors and material providers.
    12. Advertisement

Community Q&A

Search
Add New Question
  • Question
    In a commercial project, what items are typically called out for shop drawings?
    Community Answer
    These indicate feature's design and dimensions, and usually include Plan views, Elevations views, Sections views, Orthographic views and Axonometric views.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 10
  • Question
    What is an existing pole?
    Community Answer
    An existing pole is a pole which is already in place on building site. That means a new pole is not required and builders may need to work around this pole when planning and on the construction site. For example, if an existing building is only being refurbished then it is likely there will be an existing pole.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 11
  • Question
    Where am I most likely to find the ceiling height on most architectural drawing sets?
    Community Answer
    Ceiling height can usually be found in an interior elevation drawing or a section drawing. You may also find ceiling height in a detail drawing. If you are dealing with acoustic ceiling tile for example, a detail or elevation drawing will give you the height at which the perimeter track will be installed.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Be careful your set of drawings are "original size," since many sets of plans are provided in "full" and "half" size sets, you will are able to scale distances with full size drawings without needing to calculate the scale via drafting rulers.
        Thanks
        Helpful 0 Not Helpful 0
      • If the drawings are true half size, you will need to divide your readings from your ruler by 2. Note: most half size drawings do not state they are half size or other. Basically to consider anything a half size drawing, it will normally be less then a 24x18 (Arch C) sized sheet. Keep in mind, sometimes a half size sheet is called a half size even when its plotted from a 30x44 to a 11x17 size set, rendering it no longer a true half size.
        Thanks
        Helpful 0 Not Helpful 0
      • Look at house plan books or online to get an idea of the lines, measurements, and basic appearance of plans.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be sure to obtain all necessary building permits before any construction work is started. Building inspectors can stop work on any project that requires a permit and does not have one posted. Fines are also issued.
        Thanks
        Helpful 12 Not Helpful 2
      • When in doubt of a measurement or other description contained in the plans, consult the architect who drew them, rather than taking a chance on an error that can be difficult to correct at a later date.
        Thanks
        Helpful 9 Not Helpful 3
      • Be aware that plumbing, electrical, and mechanical plans do not always allow for each trade to have sufficient room in individual locations, so care should be taken to coordinate installation of the components of each trade to avoid conflict.
        Thanks
        Helpful 8 Not Helpful 3
      Advertisement

      Things You'll Need

      • A "Plan Table"
      • Architect's triangle scale
      • Engineer's triangle scale
      • Highlighters are useful in marking plan notes for reference
      • Builder's calculator

      You Might Also Like

      How to
      Build a Darkroom
      How to
      Build a Straight Form for Concrete
      How to
      Finish Concrete
      How to
      Accurately Draw a Room to Scale
      How to
      Draw Blueprints for a House
      3 Ways to Get Your House’s Blueprints or Plans
      How to
      Learn to Read Blueprints
      How to
      Identify a Sears Kit Home
      How to
      Read a Reflected Ceiling Plan
      How to
      Design and Build Your Own House
      How to
      Fit a Dry Verge
      How to
      Design a Front Porch
      Advertisement

      References

      1. ↑ [​​v161695_b01]. 6 October 2022.

      About This Article

      Article Summary X

      To read an architect's drawings, start by looking at the plan index, which should include a key for reading any abbreviations used as well as a scale bar so you know the size of the structures in the drawings. Then, use the info in the index to help you examine the floor plans and other drawings. Pay attention to any notes written on the drawing since sometimes it's easier for architects to describe something rather than draw it. To learn about the different types of drawings you may encounter, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 666,185 times.

      Reader Success Stories

      • Risheena Mae Manus

        Jul 28, 2017

        "This article helped a lot for the beginners. It's great and awesome. All details that we want to know are ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement