Download Article
Download Article
Psychrometric charts are used by engineers and scientists to visualize the relationships of gases and vapors. While the charts may look complex, they’re relatively easy to read when you know what each part of the graph is representing. By identifying the axes and reading the markings on the interior of the chart, you can plot points and draw conclusions from known measurements on the chart.
Steps
-
Look along the bottom of the chart to find the dry bulb temperature. The horizontal, or “X” axis, of the chart denotes the various temperature readings in Fahrenheit or Celsius. Use the vertical lines extending from this axis to trace the measurements throughout the chart. [1] X Trustworthy Source Penn State Extension Educational organization dedicated to delivering science-based information to people, businesses, and communities Go to source
- Each labeled temperature will have one vertical line extending from the axis. If the measurement that you are looking for is between the labeled temperatures, estimate its location.
-
Find the humidity ratio labeled on the right vertical axis. The vertical, or “Y” axis of the chart marks the amount of moisture per pound or kilogram. Use the horizontal lines extending from this axis to trace the humidity ratio throughout the chart. [2] X Trustworthy Source Penn State Extension Educational organization dedicated to delivering science-based information to people, businesses, and communities Go to source
- The humidity ratio is sometimes referred to as the “mixing ratio” or “absolute humidity.”
Advertisement -
Locate the uppermost curved line on the chart to find the saturation curve. This curve connects the X and Y axis, and marks the relationship between temperature and absolute humidity when the relative humidity is 100%. [3] X Trustworthy Source Penn State Extension Educational organization dedicated to delivering science-based information to people, businesses, and communities Go to source Along this line, note that the wet bulb temperature and the dew point are always equal to the dry bulb temperature.
- The curved line gets its shape due to a rise in absolute humidity when the temperature increases.
-
Follow the interior curved lines to see various levels of relative humidity. On the chart, you will notice various lines that follow the curve of the saturation curve. These mark the relationship between temperature and pressure when the humidity is less than 100%. In most cases, each line away from the saturation curve represents a 10% decrease in saturation. [4] X Research source
- Notice that as the temperature decreases, the relative humidity lines become closer together until they are nearly indistinguishable.
Advertisement
-
Look on the right side of the chart to find the vertical dew point line. Just to the right of the Y-axis, find the line with the dew point measurement in degrees Fahrenheit or Celsius. If you’re having trouble seeing the lines on the chart, use a ruler to align the hash marks with the lines on chart. [5] X Research source
- Since the lines for dew point remain constant and flat throughout the chart, the dew point does not change according to the dry bulb temperature.
-
Locate the vapor pressure line to the right of the dew point line. Next to or along the same vertical line as the dew point measurements, there will be markings denoting the various vapor pressures in inches of mercury or millibars. Again, if you’re having trouble following the lines on the chart, use a ruler horizontally to align the hash marks of the vapor pressures with the lines on the chart. [6] X Research source
- Like dew point, vapor pressure remains constant even if the dry bulb temperature changes.
-
Identify the diagonal specific volume lines throughout the chart. The specific volume of the air tells you the amount of air that this chart was meant to measure, normally within a range of a 2-3 m3/kg or ft3/lb. As the relative humidity increases at a certain temperature, the specific volume of the air also increases. [7] X Research source
- This measurement is helpful when using the chart to calculate the rate of cooling for a fan or coil.
-
Find the diagonal enthalpy scales surrounding the chart. Around the extremes of the chart and just outside of the saturation curve, locate the diagonal scales which represent enthalpy in BTU per pound of dry air. [8] X Trustworthy Source Penn State Extension Educational organization dedicated to delivering science-based information to people, businesses, and communities Go to source Use a ruler to extend these measurements into the chart.
- As temperature and absolute humidity increase, the enthalpy also increases.
Advertisement
-
Identify 2 known measurements that are on the chart. When solving a problem involving a psychrometric chart, you only need 2 measurements to read the chart. Pick any 2 known measurements available and plot them on the chart where the lines intersect. [9] X Research source
- Normally, you should give preference to measurements of dry temperature, absolute humidity, dew point, or vapor pressure. However, you can also use relative humidity, enthalpy, and specific volume to make estimated conclusions.
-
Use a ruler to locate other measurements at the point of intersection. Once you’ve marked the point where your known measurements intersect, use a ruler to follow the lines extending from the point of intersection to the various scales on the chart. Try to be as exact as possible when using the chart to read other measurements, and mark your answers in the proper units for that measurement. [10] X Research source
- For example, if you know the dry temperature and absolute humidity readings, you can use a ruler to gather information about the dew point, relative humidity, specific volume, enthalpy, and vapor pressure.
-
Visualize 2 measurements by comparing them on the chart. If you’re calculating a change in any of the measurements over time, plot the points on the chart and gather all of the measurements possible for each point from the chart. From there, compare the difference in the measurements and make note of how the change affected the air. [11] X Research source
- This is especially useful for visualizing how a change in temperature, absolute humidity, dew point, or vapor pressure affects relative humidity, enthalpy, or specific volume.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Before you begin to read the chart, make note of the units of measurement used in each scale. This will help when it comes time to use the measurements in an equation.Thanks
- Dry bulb and wet bulb temperature are thermodynamic properties of humid air. Read more about them and the instrument used to measure them, called a psychrometer, starting here: Psychrometrics .Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://extension.psu.edu/psychrometric-chart-use
- ↑ https://extension.psu.edu/psychrometric-chart-use
- ↑ https://extension.psu.edu/psychrometric-chart-use
- ↑ https://www.brighthubengineering.com/hvac/41264-how-to-use-psychrometric-chart/
- ↑ https://www.rotronic.com/media/productattachments/files/h/o/how_to_read_psychchart_f_web.pdf
- ↑ https://www.rotronic.com/media/productattachments/files/h/o/how_to_read_psychchart_f_web.pdf
- ↑ https://www.brighthubengineering.com/hvac/41264-how-to-use-psychrometric-chart/#
- ↑ https://extension.psu.edu/psychrometric-chart-use
- ↑ https://www.rotronic.com/media/productattachments/files/h/o/how_to_read_psychchart_f_web.pdf
About This Article
Article Summary
X
To read a psychometric chart, find the dry bulb temperature on the horizontal or X axis. Check the vertical or Y axis for the humidity ratio. The uppermost curved line on the chart shows the saturation curve when the relative humidity is 100 percent. The interior curved lines represent various levels of relative humidity. The straight, diagonal lines show specific volume lines. On the right of the chart, you’ll find the dew point line and the vapor pressure line on the right of that. For more tips, including how to draw conclusions from specific parameters on a psychometric chart, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 293,364 times.
Reader Success Stories
- "I'm a 59 year old student who's rewriting a RPO Class II exam to attain a better position at the arena where I work. I completed a 6 month community college course online 4 months ago and this site has refreshed my memory. Thanks." ..." more
Advertisement
88%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm a 59 year old student who's rewriting a RPO Class II exam to attain a better position at the arena where I work. I completed a 6 month community college course online 4 months ago and this site has refreshed my memory. Thanks."
..."
more
"This article provided simple and precise ways to read the psychrometric chart. The ways in which the procedure is explained makes it easier to understand in short space of time."
..."
more
"Could not figure out these charts for the life of me. My thermo homework will be a lot simpler now!"
