How to Setup a Haas CNC Mill

PDF download Download Article
PDF download Download Article

Setting up a Haas CNC Mill can initially seem like an overwhelming and long - winded process. There are many sequences of instructions and safety procedures which seem impossible to navigate if you have never encountered the machine. However, with a few tools, access to a computer, and careful attention to detail, this set-up can be done effortlessly. Follow the instructions in this wikiHow to safely set up and use a Haas CNC Mill.

Steps

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/4\/4e\/Step-1-7-6-2024.jpg\/460px-Step-1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/4\/4e\/Step-1-7-6-2024.jpg\/420px-Step-1-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    They should be marked with “Z87” somewhere, usually on the frame. This means that the glasses have been tested in "regular impact" scenarios and held to strict safety scenarios, ensuring your eyes are shielded while working. [1]
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/d8\/Step-2.1-7-6-2024.jpg\/460px-Step-2.1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/d\/d8\/Step-2.1-7-6-2024.jpg\/420px-Step-2.1-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Next, push the “Power On” button on the control panel.
    Advertisement
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/4\/46\/Step-3.0-7-6-2024.jpg\/460px-Step-3.0-7-6-2024.jpg","bigUrl":"\/images\/thumb\/4\/46\/Step-3.0-7-6-2024.jpg\/420px-Step-3.0-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    These include cycling the door, releasing the emergency stop, and press Power Up . At this point, the machine will begin to move automatically through a boot- up sequence.
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/a8\/Step-4.1-7-6-2024.jpg\/460px-Step-4.1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/a\/a8\/Step-4.1-7-6-2024.jpg\/420px-Step-4.1-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Ensure the tools are seated correctly and tightened to the tool holder’s specified torque.
  5. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/af\/Step-5.0-7-6-2024.jpg\/460px-Step-5.0-7-6-2024.jpg","bigUrl":"\/images\/thumb\/a\/af\/Step-5.0-7-6-2024.jpg\/420px-Step-5.0-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Also measure the length of the tool to ensure the tools are not of a size that will interfere with the mill's operation. Note down these measurements, as you will need to input them later.
  6. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/6\/61\/Step-6.2-7-6-2024.jpg\/460px-Step-6.2-7-6-2024.jpg","bigUrl":"\/images\/thumb\/6\/61\/Step-6.2-7-6-2024.jpg\/420px-Step-6.2-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Press and hold tool release until the tool is properly seated in the spindle, then release the button. This will draw it up, ensuring the tool is then properly loaded.
  7. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/d3\/Step-7.2-7-6-2024.jpg\/460px-Step-7.2-7-6-2024.jpg","bigUrl":"\/images\/thumb\/d\/d3\/Step-7.2-7-6-2024.jpg\/420px-Step-7.2-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Place a tool offsetter on top of your part to be milled. For each tool, slowly bring it down until the gauge reads zero. Push Offset ” and then Tool Length Measure button. Input its height and diameter in the relevant fields.
  8. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/aa\/Step-8.8-7-6-2024.jpg\/460px-Step-8.8-7-6-2024.jpg","bigUrl":"\/images\/thumb\/a\/aa\/Step-8.8-7-6-2024.jpg\/420px-Step-8.8-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
  9. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/10\/Step-8.1-7-6-2024.jpg\/460px-Step-8.1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/1\/10\/Step-8.1-7-6-2024.jpg\/420px-Step-8.1-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Push the offset button and then Part Zero Set to set up the X and Y zero points for the G54 coordinate system.
    • G54 is one of the standard coordinate systems used in CNC programming. The "zero point" defined in terms of the machine's coordinate system and tells the CNC machine where the workpiece is located.
  10. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/1a\/Step-9.1-7-6-2024.jpg\/460px-Step-9.1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/1\/1a\/Step-9.1-7-6-2024.jpg\/420px-Step-9.1-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Insert the USB in the side of the controller and push List Program. Push Up then over to USB . Scroll down and highlight the program you would like to run. Press Select Program and it should be your active program.
  11. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/4\/40\/Step-10.0-7-6-2024.jpg\/460px-Step-10.0-7-6-2024.jpg","bigUrl":"\/images\/thumb\/4\/40\/Step-10.0-7-6-2024.jpg\/728px-Step-10.0-7-6-2024.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    You can double-check for any errors by pushing the "Graphics" key and pressing the green Cycle Start . If the red light comes on, there is a problem. Otherwise, the program will run its course without error.
  12. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/6\/6a\/Step-11.0-7-6-2024.jpg\/460px-Step-11.0-7-6-2024.jpg","bigUrl":"\/images\/thumb\/6\/6a\/Step-11.0-7-6-2024.jpg\/420px-Step-11.0-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Press the "Position", "Rapid 25%", "Optional Stop", and "Single Block" keys. These modes will make it safer to run the first part.
  13. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/5d\/Step-12.1-7-6-2024.jpg\/460px-Step-12.1-7-6-2024.jpg","bigUrl":"\/images\/thumb\/5\/5d\/Step-12.1-7-6-2024.jpg\/728px-Step-12.1-7-6-2024.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Press Cycle Start to begin the automated cutting process and watch the "Distance to Go" on the screen as you advance throughout the program. The machine will be following the alphanumeric CNC G code as if reading through a set of instructions. When the program is finished, the machine should stop and the green light should go out, signaling that it is no longer running.
  14. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/0\/0d\/Step-13.0-7-6-2024.jpg\/460px-Step-13.0-7-6-2024.jpg","bigUrl":"\/images\/thumb\/0\/0d\/Step-13.0-7-6-2024.jpg\/420px-Step-13.0-7-6-2024.jpg","smallWidth":460,"smallHeight":613,"bigWidth":420,"bigHeight":560,"licensing":"<div class=\"mw-parser-output\"><p>Image by: Uploader<br>\nLicense: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by\/3.0\/\">Creative Commons<\/a>\n<\/p><\/div>"}
    Make sure to measure the part before removing it, so it can be re-machined if necessary.
    15. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Become familiar with the machine manual, safety procedures, practices, and warnings before using it.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Read a Psychrometric Chart
      How to
      Read Engineering Drawings
      How to
      Calculate a Unit Vector
      How to
      Test a Multimeter
      How to
      Learn About Engines
      How to
      Solve Circuit Problems
      Advertisement

      References

      1. ↑ https://rx-safety.com/2015/12/does-z-mean-on-safety-glasses/

      About This Article

      Thanks to all authors for creating a page that has been read 546 times.

      Did this article help you?

      Advertisement