Download Article
Download Article
An over-the-range microwave hangs above your stove and frees up a lot of counter space. If your microwave is broken or needs to be replaced , you can easily remove it yourself by undoing a few screws. Once the microwave is unsecured, all you have to do is lift it out and away from the wall. In only a few minutes, you’ll have space to install a new microwave!
Steps
-
Pull your range out of the way if you want to access your microwave easier. Pull an electric range out from the wall and disconnect the power supply. If you have a gas stove, pull your range out slightly to expose the gas hose and valve. Turn off the gas valve before loosening the hose with a wrench and pulling the range out the rest of the way. Set up a step ladder where your range used to be so you can access your microwave without obstruction. [1] X Research source
- You don’t need to move your range if you don’t want to.
-
Unplug the microwave from the outlet and feed it through the hole in your cabinets. Open the cabinets above your microwave and locate the outlet where it’s plugged in. Once you unplug it, feed the cord through the hole in the bottom of your cabinet so it doesn’t get caught when you try to pull it out. [2] X Research source
- Always make sure your microwave is unplugged before moving it so you don’t get shocked.
Advertisement -
Unscrew the mounting screws on top of your microwave. Locate the 2-3 screws on the bottom of the cabinet connecting to the top of your microwave. Keep one hand underneath the front of the microwave to support it so it doesn’t fall. Use an electric screwdriver to turn the screws. [3] X Research source
- Have a partner help support the microwave from underneath so it doesn’t drop.
Advertisement
-
Tilt the microwave forward on the mounting bracket. The mounting bracket holds the back of your microwave on the wall. Hold the front of the microwave with both hands so it doesn’t fall forward. Start tilting the microwave forward so the tabs on the bracket loosen. Keep tilting your microwave until it’s at about a 30-degree angle. [4] X Research source
- The microwave will pull the mounting bracket off of the wall and damage it if you let it go.
- If the microwave is too heavy for you to support, have a partner help you hold it.
-
Lift the microwave slightly to take it off of the wall. Support the microwave from underneath and lift it slightly to pop the tabs from the mounting bracket out from the bottom of the microwave. As you’re lifting the microwave, slowly take steps backward until the microwave is out of the opening. Set the microwave on your counter so you don’t have to bend down. [5] X Research source
-
Unscrew the mounting bracket from the wall. The mounting bracket will be attached to your wall with 3 or 4 screws. Use an electric screwdriver to remove the screws and take the bracket off of the wall. [6] X Research source
- Don’t try hanging a new microwave on an existing mounting bracket.
Tip: New microwaves come with their own mounting brackets, so you don’t need to save the old ones.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Always support the weight of the microwave so it doesn’t fall off of or damage your wall.Thanks
Advertisement
Things You’ll Need
- Wrench
- Stepladder
- Electric screwdriver
References
About This Article
Thanks to all authors for creating a page that has been read 94,971 times.
Advertisement