Download Article
Download Article
Repairing cracks in wood floors is relatively easy, provided the cracks aren't too large.
Steps
-
Get some sawdust from the floor you want to repair. If you don't have any leftover pieces of matching wood laying around your house, you'll have to go to a flooring store and buy a piece of wood to match. (same species and stain if possible).
-
If you can't find any wood to match, you'll have to "cannibalize" a piece of the existing floor. Pull up the baseboard and pry up a strip from the edge of the floor, or alternatively, remove a piece from under a doorway. Sand the side of the wood nearest the wall where it will be hidden under the baseboard once it's re-laid, or at the edge of the strip under the door where it's hidden by the door jamb.Advertisement
-
Using a belt sander, sand off a cup or two of wood from the piece of wood into a container (or however much you think you'll need to fill the cracks).
-
Mix the sawdust with some wood glue to make a fairly thick paste.
-
Using a plastic trowel (or a plastic spatula), lay the sawdust/glue mixture into the cracks. Try to finish off as smooth as possible. Wipe the patch and adjacent flooring with a damp rag to wipe off any excess. Wipe on a diagonal to avoid pulling filler out of the patch.
-
Let the filler dry for a day or two. [1] X Research source
-
Sand lightly. If there's a huge color difference between the patch and the rest of the floor, you might need to re-stain the patch.Using a very small artist's brush, stain the patch. Allow to dry for a minute and wipe off. Let the stain set overnight and using another small artist's brush, cover the patch with a coat of varnish to match the existing floor.
-
If there are a large number of patches on your floor, or there's a noticeable difference in level of sheen, you might need to re-varnish the entire floor. [2] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Always wear a face mask and eye protection when using power sanders.Thanks
- Add masking tape to the flooring adjacent to the area to be patched. Once you've finished patching, immediately remove the tape - don't let the sawdust & glue mixture dry on the tape.Thanks
- Hardwood flooring is nailed to the sub floor. If you're pulling up a piece of wood, you'll have to cut through the nails to remove a strip. A reciprocating saw with a blade that will cut through nails is the easiest way to cut through nails. They are power nailed to the sub floor so there is no way you can pull the nails out by hand. When you reinstall the strip, you'll have to hand nail it back in place.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- belt sander
- sawdust from your wood floor
- wood glue
- plastic trowel (or spatula)
- small artist paintbrushes
- varnish
- wood stain
- masking tape
- reciprocating saw and blades (possibly)
References
About This Article
Thanks to all authors for creating a page that has been read 90,091 times.
Advertisement