How to Smoke a Tobacco Pipe

PDF download Download Article
PDF download Download Article

The art of pipe smoking is one of the oldest forms of tobacco use. The pipe remains a comforting approach often overlooked by the modern smoker. That said, take up pipe smoking because you're interested in this rich experience, not because you think it's a safe alternative to cigarettes. The health risks are comparable or only slightly reduced.

Part 1
Part 1 of 3:

Gathering Supplies

PDF download Download Article
  1. Part of the pleasure of smoking pipes is the ability to create your own perfect experience. Take your time browsing a tobacconist's shop for aesthetically pleasing options. Heft each pipe in your hand — a lightweight pipe is almost always more comfortable. [1] If you're at a complete loss, ask the employees for recommendations.
    • Even an attractive wooden pipe can have hidden flaws — and probably does if it comes with a low price tag. If price is your main concern, a corncob pipe is a safer bet.
    • A metal filter in the stem can absorb moisture and perhaps alter the flavor. This is a matter of personal preference, and the filter should be removable if you change your mind.
  2. Nothing disrupts a smoke like a malfunctioning pipe. Avoid frustration with a quick inspection before you buy: [2]
    • Avoid pipes with walls thinner than ¼ inch (6mm), about the width of a pencil. The base should be at least this thick as well; to measure this, put a straight pipe cleaner down the chamber, pinch it at the top of the chamber, then compare this height to the outside wall.
    • Stick a pipe cleaner down the stem. It should run smoothly through and emerge very close to the base of the chamber.
    • Although there are exceptions, thick varnishes may flake and bubble from heat after heavy use.
  3. You'll need more than a pipe to start smoking. If you visit a pipe shop, get everything at once to avoid multiple trips and hassle. You'll also need:
    • A lighter or matches. Plastic butane lighters are cheap and plentiful but some smokers dislike the smell and taste. Pipe lighters are available for a variety of prices, but it might be a good idea to start with a good supply of wooden matches. You can always invest in a pipe lighter later.
    • A bundle of pipe cleaners to keep your pipe clean and functioning properly.
    • Pipe tamper. This is used to pack the tobacco in the bowl.
  4. Walking into a tobacco store can be overwhelming at first. Cyprian Latakia? Dutch Cavendish? Fortunately, a quick lesson should be enough for your first purchase.
    • Aromatic blends (sometimes called American) have added flavors. Most beginners prefer these milder, sweeter options.
    • Non-aromatic blends are pure tobacco, typically with a strong, spicy taste. "English blends" are non-aromatic blends that include Latakia, a powerful, smoky variety.
    • Any tobacco can go through a "Cavendish" process to make it sweeter and lighter.
    • If possible, purchase two or three small sample tins so you can try a range of options.
  5. Tobacco is sold in various shapes and sizes. There are many cuts and many ways to prepare them, but these are good beginner options:
    • Ribbon cut tobacco comes in long, thin, ribbons, which can be placed directly in the bowl.
    • Flake cut tobacco comes in thick strips, or irregular broken pieces. Either way, rub it between your fingers until it breaks apart into small pieces.
Part 2
Part 2 of 3:

Smoking

PDF download Download Article
  1. Pipe smoking is a leisurely activity. Take some time to yourself in a comfortable spot where you won't be disturbed, and where your smoke won't disturb anyone else.
    • If you're smoking a new briar pipe, smoke indoors away from drafts. Even gentle wind will cause the pipe to burn hotter, which can damage a briar pipe before it's "broken in." [3] This is not necessary for most other pipes, including corncob pipes.
  2. A drink on hand keeps your mouth and throat from drying out, and may prevent a sore tongue. Some people enjoy pairing pipes with coffee or tea instead, but wait on that until you are more experienced, and can choose a good pairing.
    • Drinking alcohol before or during a smoke is not recommended, since it greatly increases smoke-related cancer risk.
  3. Clean the pipe . Before each smoke, run a pipe cleaner through the stem and tap out the remnants of ash and tobacco. [4]
  4. Correct packing takes practice, and has a major impact on your enjoyment. The tobacco should be loose enough that you can easily draw air through it, and springy to the touch. Have an experienced smoker show you what to do, or use this beginner-friendly method:
    • Drop a tiny pinch of tobacco in the chamber. Tamp this very lightly or not at all, leaving plenty of air between the leaves.
    • Add a slightly larger pinch, tamping lightly until the bowl is half-filled.
    • Finish with a third pinch, tamping with a bit more pressure until there is a gap of ¼ inch (0.6mm) above the tobacco.
    • Note — when breaking in a new briar pipe, many people fill to ⅓ or ½ the depth described here the first few smokes. This helps form a protective cake of charcoal, although not all smokers agree with this approach. [5] [6]
  5. If using a match, let the sulfur burn off for a few seconds first to avoid getting a mouthful of match taste. Move the flame around the surface of the tobacco while drawing on the mouthpiece with long, even draws. Many pipe smokers prefer to light the pipe once, then tamp down the ash, extinguishing the embers in order to give the tobacco a flat, even surface. This is called a "false light" - it's an optional step, but tends to help the tobacco burn more evenly and require fewer relights later. After tamping, relight the pipe as described above. If the pipe goes out right away — which is common — just tamp it down gently and light the same way.
  6. Most pipe smokers draw smoke into their mouth by sucking gently, or moving their tongue back along the palate. [7] Some beginners and cigarette smokers inhale instead, but it's best to keep the smoke in your mouth, not your lungs. Hold the pipe bowl in your hand as you smoke for the first time. Draw just often enough to keep the pipe lit, without making the pipe too hot to hold.
    • A minority of pipe smokers do enjoy the occasional inhale, which gives more of a nicotine buzz. Pipe smoke is much stronger and thicker than a cigarette, so stick with a gentle pull and limit yourself to one or two inhales per bowl.
    • Avoiding inhalation does make lung cancer less likely, but there is still a high risk of oral cancers from long-term use. [8]
  7. If the pipe goes out, just tamp again and relight. The ash surface is actually beneficial, and there's no need to dump it out until it's thick enough to prevent lighting. When this happens, tap out about half of the ash by knocking the pipe against a cork knocker, your hand, or another soft object.
Part 3
Part 3 of 3:

After the Smoke

PDF download Download Article
  1. Once you're done smoking, let the pipe cool. If you didn't finish the bowl, tamp down the tobacco to extinguish it.
    • Never take apart the pipe while it is still warm. This may crack the stem.
  2. There are two different approaches for this, based on the type of pipe:
    • Briar pipes need a charcoal buildup (a "cake") to protect the wood. Cover the bowl and shake the ash around to loosen it and distribute it around the bowl of the pipe. With your finger, rub the ash into the walls of the bowl. Dump the remnants out. [9]
    • For other pipes, most smokers prefer them kept clean. Shake out the ash, then wipe the bowl with a paper towel or pipe cleaner. (Meerschaum pipes especially should never be allowed to cake heavily.)
  3. Take off the stem and stick a pipe cleaner through it to remove moisture and residue. Do the same with the shank of the pipe, leading down to the chamber.
  4. Take off the stem of the pipe. Moisten a pipe cleaner slightly (saliva works fine) and push through the shank until you can just see the end at the bottom of the bowl. Repeat this process a few times, alternating by gently blowing through the stem to clear any loosened ash. Repeat for the stem. [10]
  5. This gives time for the moisture in the pipe to evaporate, preventing difficult draws and gurgling noises.
    • If you want to smoke more often, add a second pipe to your collection.
    • You can leave a pipe cleaner in the pipe to absorb any remaining moisture as it rests.
  6. A pipe cleaner or cotton swab dipped in alcohol will remove gunk that can block airflow or affect flavor. If using a kind of alcohol that's poisonous to drink, such as rubbing alcohol, be sure to let the pipe rest for 24 hours to allow the alcohol to fully evaporate. Any high-percentage spirit can be used, but neutral tasting spirits such as grain alcohol or vodka are best. Follow it with a dry pipe cleaner to remove the moisture. Be careful not to get any alcohol on the finished surfaces of the pipe as it can remove the finish. Some pipe cleaners do this after each smoke, and others don't bother with it at all. If you stick with the habit, ask a fellow smoker for help identifying the signs of a dirty pipe.

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Tips

      • Above all, be patient, and take things slowly. For most part, the pipe smoking experience isn't pleasant until one is fully proficient in packing, lighting, tamping and smoking cadence. It takes time to discover favourite tobacco blends and pipes that suit your tastes.
        Thanks
        Helpful 1 Not Helpful 1
      • Tobacco is packaged at different degrees of moisture, which is mostly a matter of preference. An extra-damp tin might get easier to smoke after you let it air-dry for a bit.
        Thanks
        Helpful 1 Not Helpful 0
      • Get support and advice. There are many great forums out there and great people to help you discover this wonderful hobby and pastime.
        Thanks
        Helpful 1 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Never use a metal pipe for smoking tobacco. They look very unusual and striking but remember - metal conducts heat. You may burn yourself with these.
        Thanks
        Helpful 114 Not Helpful 19
      • Smoking a pipe can leave you with "tongue bite," an irritated or sore tongue. The cause of this is unclear, but smoking at a lower temperature (less packed, a slower draw) can help, as can switching tobaccos. Experienced smokers learn to avoid this as they perfect their technique.
        Thanks
        Helpful 13 Not Helpful 2
      • Meerschaum pipes are especially delicate (and valuable). Ask an experienced meerschaum smoker for advice.
        Thanks
        Helpful 36 Not Helpful 15
      • Pipe smoking carries a risk of oral and throat cancers that is similar to smoking cigarettes. When inhaled, it also carries a risk of lung cancer.
        Thanks
        Helpful 47 Not Helpful 44

      Things You'll Need

      • A pipe
      • Pipe tamper
      • Tobacco
      • For cleaning:
      • Pipe reamer
      • Pipe cleaners
      • Pipe polish + cloth
      • Clean, lint free cloth

      You Might Also Like

      How to
      Clean Smoke Damage
      How to
      Dip Smokeless Tobacco
      How to
      Flavor Cigars or Pipe Tobacco
      How to
      Make a Bong
      How to
      Make a Water Bottle Bong
      How to
      Make an Apple Pipe
      How to
      Smoke from a Bong
      How to
      Make a Bowl (Pipe) out of Aluminum Foil
      How to
      Properly Clean a Glass Weed Pipe
      How to
      Use a Water Bong
      How to
      Set Up a Hookah
      How to
      Make a Pipe from Things You Have at Home
      How to
      Make DIY Water Bottle Gravity Bong
      How to
      Get Resin out of a Bowl

      References

      1. ↑ https://www.smokingpipes.com/information/howto/selecting.cfm
      2. ↑ https://www.smokingpipes.com/information/howto/selecting.cfm
      3. ↑ https://pipedia.org/wiki/Pipe_Packing_and_Smoking_techniques
      4. ↑ https://www.smokingpipes.com/information/howto/cleaning.cfm
      5. ↑ https://www.pipesandcigars.com/faq/article/103/new-pipe-break-in
      6. ↑ https://pipedia.org/wiki/Pipe_Packing_and_Smoking_techniques
      7. ↑ https://www.ncbi.nlm.nih.gov/pubmed/4037537
      8. ↑ https://www.healthday.com/encyclopedia/cancer-8/mis-cancer-news-102/pipe-smoking-645343.html
      9. ↑ https://www.smokingpipes.com/information/howto/cleaning.cfm
      1. ↑ https://www.smokingpipes.com/information/howto/cleaning.cfm

      About This Article

      Article Summary X

      To smoke a tobacco pipe, start by choosing your preferred flavor and cut of loose tobacco, then fill the pipe's bowl with about 3 pinches of the loose leaves. Next, light the tobacco in the bowl with a wooden match or pipe lighter while drawing on the mouthpiece with long, even draws. Once the pipe is lit, smoke with small, occasional draws, keeping the smoke in your mouth rather than inhaling it into your lungs. Tamp down the tobacco and relight the pipe as needed until you finish the bowl! For tips on maintaining your pipe, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,023,852 times.

      Reader Success Stories

      • Jim Phelan

        May 2, 2017

        "Returning to my pipes after a 30 year rest (4 - 5 ounces a week), I find this article spot on. In particular: if ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?