Getting a "Start PXE Over IPv4" Message On Boot? Here's How to Fix It

PDF download Download Article
Learn how to resolve this annoying Windows boot error
PDF download Download Article

Are you having trouble booting your computer due to the "Start PXE over IPv4" message? The "Start PXE over IPv4" message essentially means your computer is trying to boot from a network drive instead of your hard drive, which can cause issues. This is a frustrating problem, but thankfully, there are a few easy solutions. In this article, we'll go over several ways to troubleshoot this issue.

Ways to Resolve "Start PXE Over IPv4"

  • Open the BIOS and make sure your boot drive is first in the boot order.
  • Reset your BIOS settings.
  • Ensure your hard drive is connected properly.
  • Check your drive for errors.
  • Disable Secure Boot, Legacy Support, and/or Wake-On-Lan in the BIOS.
  • Repair the boot sector.
  • Manually update your BIOS.
Method 1
Method 1 of 10:

Change Boot Order in BIOS/UEFI

PDF download Download Article
  1. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo on the screen. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  2. Each motherboard will have a slightly different BIOS/UEFI layout, so the location may vary.
    Advertisement
  3. Your boot drive is either a hard drive (HDD) or a solid-state drive (SSD) on your device. If you only have one drive, that one will be your boot drive by default.
    • If your boot drive isn't first, use the BIOS/UEFI controls to change the first boot device to your boot drive.
  4. Along the top bar with the various tabs should be a button that says Save & Exit or just Exit . Be sure to save your settings when prompted.
    5. Advertisement
Method 2
Method 2 of 10:

Reset BIOS/UEFI to Default

PDF download Download Article
  1. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo on the screen. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  2. This button is usually near the Save / Exit buttons. The button may say Load Setup Defaults , Factory Default , Clear BIOS , or Reset to Default .
  3. Follow any on-screen instructions to confirm your choice.
  4. Along the top bar with the various tabs should be a button that says Save & Exit or just Exit . Be sure to save your settings when prompted.
    5. Advertisement
Method 3
Method 3 of 10:

Check Hard Drive Connection

PDF download Download Article
  1. On a desktop, this usually involves removing the screws from the back of one of the side panels and popping it off. On a laptop, you'll need to unscrew the bottom panel and remove it.
    • If you have a tempered glass side panel, you may not need to remove it if your computer parts are easy to see.
    • As laptop parts are smaller, harder to see, and sometimes soldered into place, you may have difficulty following this method for laptops. If you suspect your laptop hard drive has become disconnected but you can't fix it yourself, bring your computer to a computer repair shop for assistance.
  2. If you have an HDD or 2.5" SSD, it is likely connected to the motherboard with a cable and is stored in a hard drive bay, which looks like a small shelf. If you have an M.2 or mSATA SSD, it will be connected directly to your motherboard. [1] M.2 slots are usually near the CPU and PCIe slots, though they may be on the back of the motherboard if you have a Mini-ITX. The mSATA slot is usually near the RAM slots.
  3. If you have an HDD or 2.5" SSD, check both the power cable (which connects to the power supply) and the data cable (which connects to the motherboard). If you have an M.2 or mSATA SSD, make sure the drive is fully and securely seated into its slot, and it's secured with a screw to hold it in place.
  4. If you notice that your drive isn't connected properly, power down your computer (if it's not off already). Then, replug or reseat your drive as needed, making sure it's connected securely.
  5. If the issue persists, try troubleshooting with the other methods in this article.
    6. Advertisement
Method 4
Method 4 of 10:

Run the CHKDSK Tool

PDF download Download Article
  1. The CHKDSK command can potentially fix errors on storage devices, which may resolve the "Start PXE over IPv4" error. [2]
  2. You must run the Command Prompt as an administrator for the command to work properly.
  3. /f /r /x and press Enter . Replace ""[drive]"" with the drive letter of your boot drive.
    • Note that running CHKDSK could take several hours, so it may take some time before the command finishes up.
    4. Advertisement
Method 5
Method 5 of 10:

Disable Secure Boot & Legacy Support

PDF download Download Article
  1. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo on the screen. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  2. Each motherboard manufacturer has a slightly different BIOS/UEFI layout, so the location may vary depending on your model.
  3. Depending on your motherboard manufacturer, this option may be named something slightly different.
  4. Use the arrow keys to navigate to the Secure Boot option and switch it to Disabled .
  5. Along the top bar with the various tabs should be a button that says Save & Exit or just Exit . Be sure to save your settings when prompted.
    6. Advertisement
Method 6
Method 6 of 10:

Disable Legacy Support

PDF download Download Article
  1. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo on the screen. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  2. Each motherboard manufacturer has a slightly different BIOS/UEFI layout, so the location may vary depending on your model.
  3. Depending on your motherboard manufacturer, this option may be named something slightly different.
  4. Use the arrow keys to navigate to the Legacy option and switch it to Disabled .
  5. Along the top bar with the various tabs should be a button that says Save & Exit or just Exit . Be sure to save your settings when prompted.
    6. Advertisement
Method 7
Method 7 of 10:

Disable Wake-On-LAN

PDF download Download Article
  1. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo pop up. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  2. Each motherboard manufacturer has a slightly different BIOS/UEFI layout, so the location may vary depending on your model.
  3. Use the arrow keys to switch it to Disabled .
  4. Along the top bar with the various tabs should be a button that says Save & Exit or just Exit . Be sure to save your settings when prompted.
    5. Advertisement
Method 8
Method 8 of 10:

Check For Any Bootable Media

PDF download Download Article
  1. Bootable media includes USB drives, CDs, and DVDs. Even if the media is not formatted as a boot drive, it could still cause your computer to get confused during startup.
    • If you have any bootable media inserted, remove it. Then, try restarting your computer again to see if the issue is resolved.
Method 9
Method 9 of 10:

Repair Boot Sector

PDF download Download Article
  1. 1
    Insert your Windows installation or recovery media into your computer. If you don't have recovery media, check out this wikiHow article to learn how.
  2. 2
    Restart the computer and press the boot menu key. You must press this before the Windows logo appears. This key varies based on your computer manufacturer. Below are some common manufacturers and their default boot menu key , but check your computer's documentation for the most accurate results:
    • Acer : Del or F2
    • Asus : F9
    • Dell : F12
    • HP : Esc or F10
    • Lenovo : F1 or F2
    • Samsung : F2
  3. 3
    Navigate to the Command Prompt. Click on Repair your computer > Troubleshoot > Advanced options > Command Prompt .
  4. 4
    Enter the following commands one at a time. After each command, press Enter .
    • bootrec /fixmbr
    • bootrec /fixboot
    • bootrec /scanos
    • bootrec /rebuildbcd
  5. 5
    Restart your computer to see if the issue is fixed. If not, try troubleshooting with the other methods in this article.
    6. Advertisement
Method 10
Method 10 of 10:

Manually Update BIOS

PDF download Download Article
  1. 1
    Check your BIOS version if you can access your computer. If you can't get onto your computer, skip to the next step.
    • Search for msinfo in the taskbar search bar.
    • Click System Information .
    • Note down what it says your BIOS Version is.
    • Go to your motherboard manufacturer's website and check to see what the latest firmware version is for your motherboard. If your BIOS is outdated, continue with the next step.
      • Note: Updating the BIOS manually can be tricky, and it can cause your computer to stop working if something goes wrong in the process. If you're not confident in updating the BIOS yourself, bring your computer to a computer repair shop and ask for assistance.
  2. 2
    Download the latest BIOS firmware version. If you can't access your computer, you'll need to do this on a different computer.
  3. 3
    Put the BIOS firmware update on a USB drive. If you're doing this on your own computer, you can leave the drive inserted. If you're doing this on another computer, eject the drive once the update file copies over, then insert it into your computer.
  4. 4
    Restart your computer. If your computer is already turned off, you can turn it on.
  5. 5
    Press the BIOS/UEFI button. You'll want to hit the button to open your BIOS/UEFI when you see your motherboard logo pop up on the screen. The buttons to open the BIOS/UEFI for the most popular motherboard brands are listed below, but you may want to check your motherboard manual for specifics:
    • ASUS: Delete or F2
    • ASRock: Delete or F2
    • EVGA: Delete or F2
    • Gigabyte: Delete or F2
    • MSI: Delete
  6. 6
    Update your BIOS. How you install the update varies between motherboard manufacturers, but you should see an option to Update BIOS from Drive (or something similar). You may have to go to the Boot menu first.
    • Once the update is complete, restart your computer if it doesn't automatically restart.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      17 Reasons Screen Mirroring Isn't Working (And How to Fix It)
      How to
      Find out How Long Your Computer Has Been On
      How to
      Diagnose a Computer Problem
      How to
      Fix High CPU Usage
      How to
      Fix an I/O Error on Windows: 12 Troubleshooting Tips & Tricks
      10 Ways to Fix the Driver Power State Failure Error on Windows
      7 Ways to Log Into a Windows PC with a Forgotten Password
      How to
      Troubleshoot a Computer
      Simple Steps to Fix a Keyboard Typing in All Caps
      Why Secure Boot Can't Be Enabled on a PC or Laptop & How to Fix it
      VGA Light on Motherboard: Troubleshooting Guide + Easy Fixes
      How to
      Fix a PC Which Won't Boot
      7 Quick Ways to Fix a Lenovo Yoga Screen That Flickers
      What to Do When Your Samsung Tablet Won’t Power On
      Advertisement

      References

      1. ↑ https://www.kingston.com/en/blog/pc-performance/ssd-form-factors
      2. ↑ https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chkdsk?tabs=event-viewer

      About This Article

      Thanks to all authors for creating a page that has been read 2,194 times.

      Is this article up to date?

      Advertisement