Download Article
Download Article
Light microscopes are used by scientists and science lovers alike to magnify small specimens like bacteria. They are less powerful than alternatives like electron microscopes but also much cheaper and more practical for casual use. By focusing light on their lenses, they allow you to examine the smallest cellular constructs that make up the specimens. But first, you need to set up a slide and adjust your microscope's light and focus!
Steps
-
Connect your light microscope to an outlet. If your light microscope uses an illuminator, it requires power. Place your microscope on a flat surface and connect its power cord into an outlet. Now, flip on the light switch, which is typically located on the bottom of the microscope. After flipping the switch, the light should come out of the illuminator, which is the light source. [1] X Research source
- If your microscope uses a mirror instead of an illuminator to focus natural light onto your slide, skip this step.
-
Rotate the revolving nosepiece to the lowest power objective lens. Often, this is "3.5x" or "4x," although other microscopes might have lower or higher options. Regardless, the lowest power lens is the shortest in length. Once you hear the lens click into place, stop rotating the nosepiece. [2] X Research source
- Be gentle as you rotate the nosepiece to avoid breaking it or wearing it down.
Advertisement -
Place a glass cover or coverslip over your specimen. If you haven't done so already, cover your specimen slide with a glass cover or coverslip. This will protect the specimen and the objective lens, which is the vertical lens that hovers over the slide. [3] X Research source
- If your microscope doesn't come with glass covers or coverslips, purchase them from online suppliers.
-
Mount your specimen onto the stage using its metal clips. Underneath the lens is a square, flat surface with 2 metal clips that run parallel. This is called the stage and it is responsible for holding the specimen. Press down on the back end of each stage clip to raise them and slip the slide underneath the clips. Center the slide so that each clip rests on its left and right end and the sample is directly in the middle. [4] X Research source
- Manually adjust the metal clips until your slide is even.
- If your microscope has a mechanical stage, move the curved metal slide holder to the side. Now, insert your specimen flush against the straight, stationary slide holder and release the curved piece so it moves back into place.
-
Rotate the focus knob/coarse adjustment knob until the objective lens hovers over the slide. The focus knob is typically the large knob located to the right of the microscope. Turning the focus knob either moves the objective lens or the stage. Adjust the objective lens until it is directly over the slide, with enough space in between to fit a piece of paper. [5] X Research source
- Never let the focus knob touch the coverslip.
Advertisement
-
Move the slide until it's focused in the center. Gently move the slide around with one of your hands so that the image is in the center of your vision. Once the light provides the clearest image, stop adjusting. [6] X Research source
- If you're using a low-power objective lens, you might need to decrease the light intensity or turn the condenser off.
-
Adjust the mirror, illuminator, and/or diaphragm for maximum light exposure. If your microscope has a mirror, adjust its position under the stage until it reflects the maximum amount of light onto your slide. For microscopes with illuminators, rotate the rim around the condenser that is underneath the stage until it focuses the maximum amount of light. Similarly, the diaphragm is the rotating disc located under the stage that has varying holes for different light intensities—rotate it until you achieve the maximum. [7] X Research source
- Whether your microscope has a mirror or illuminator, be sure that the light is focused directly onto the middle of the sample or condenser, respectively.
-
Adjust the coarse and fine adjustment knobs until the image is focused. Locate the eyepiece, which extends diagonally toward you. Look through the eyepiece as you adjust the knobs. Turn the coarse adjustment knob (the larger one) so that the objective lens moves upward and away from the slide in centimeter increments until the image comes into focus. Now, if necessary, use the fine adjustment knob (the smaller one) to move the lens in millimeter increments for additional clarity. [8] X Research source
- If your microscope has a moving stage, turning the coarse adjustment knob will shift it up and down. Turn the knob so that the stage moves downward and away from the lens.
-
Switch to the next powerful objective lens and make final focus adjustments. Rotate the revolving nosepiece to the objective lens that is next in terms of magnification intensity. After switching upward in intensity, adjust the fine focus knob to make any minor adjustments for clarity. At this point, your image should only need minimal focusing.
- If you can't focus the image properly, readjust the focus knob until the objective lens hovers over the image. Now, repeat the previous steps to readjust the mirror, condenser, and diaphragm, as well as the coarse and fine adjustment knobs.
-
Examine your specimen! Always keep both eyes open. Even though you're only using one eye to look through the lens, closing the other eye can strain your eyes. And remember: everything is backward and upside down! Moving the slide to the right puts the image to the left and vice versa. [9] X Research source
- When you're done examining your specimen, turn the objective lens knob until it is at the highest point from the specimen. Turn the nosepiece back to the lowest power lens, carefully remove the slide, and place a cover on your microscope.
Advertisement
Community Q&A
Search
-
QuestionHow do you use a light microscope to observe cells?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerTo observe some of your own cheek cells, take a swab of the inside of your cheek and wipe it on a glass slide. Carefully place a glass cover slip over the cell sample, lowering it slowly from an angle so that you don’t trap any bubbles. Put the slide on the microscope stage and clip it in place. Use the shortest lens (lowest magnification) first and adjust the coarse focus knob until you can make out the individual cells. Switch to a higher-powered lens and adjust the fine focus knob so that you can see the cells in greater detail.
-
QuestionHow does a microscope work?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA microscope works by passing light through 2 or more lenses, which bend the light rays in order to make them appear larger. The mirror on the microscope helps concentrate the light and direct it up through the lenses to your eye so that you can see objects on the slide more clearly.
-
QuestionWhat are the advantages of a light microscope?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerLight microscopes are smaller, easier to use, and less expensive than electron microscopes. They also allow you to observe living cells in action, whereas this is not possible with an electron microscope.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Always hold the microscope with both hands. Grasp the arm with one hand and hold the base for support using your other hand.Thanks
- Keep the microscope covered when you're not using it.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Never touch the lens glass with your fingers, and always clean it with lens paper.Thanks
Advertisement
References
- ↑ http://www.biologyreference.com/La-Ma/Light-Microscopy.html
- ↑ http://www.biologyreference.com/La-Ma/Light-Microscopy.html
- ↑ http://www.biologyreference.com/La-Ma/Light-Microscopy.html
- ↑ https://www2.mrc-lmb.cam.ac.uk/microscopes4schools/microscopes2.php
- ↑ https://www2.mrc-lmb.cam.ac.uk/microscopes4schools/microscopes2.php
- ↑ https://www2.mrc-lmb.cam.ac.uk/microscopes4schools/microscopes2.php
- ↑ https://www.ruf.rice.edu/~bioslabs/methods/microscopy/microscopy.html
- ↑ http://www.biologyreference.com/La-Ma/Light-Microscopy.html
- ↑ http://www.biologyreference.com/La-Ma/Light-Microscopy.html
About This Article
Thanks to all authors for creating a page that has been read 142,351 times.
Reader Success Stories
- "I was thinking of preparing a flowchart for my undergrad MBBS students for how to use and focus slides on the microscope. The illustrative picture and simple text are perfect for the students. Highly recommended." ..." more
Advertisement
"I was thinking of preparing a flowchart for my undergrad MBBS students for how to use and focus slides on the microscope. The illustrative picture and simple text are perfect for the students. Highly recommended."
..."
more
"This article, especially the image, helped my students. Many thanks."
"It helps and provides me with better ideas when writing my report."
"It's direct and understandable. This is wow!"
