How to Use an Angle Grinder

PDF download Download Article
PDF download Download Article

Angle grinders are electric power tools with detachable grinding wheels that you can apply to a variety of jobs around your home, including sanding, grinding, cleaning, and cutting. When using a grinder, make sure you're picking the right attachment for the job and using that attachment correctly. Always practice safety procedures when working with a grinder, as it can cause injury, both from the blade itself and from flying debris. [1]

Method 1
Method 1 of 3:

Choosing and Applying the Right Attachment for the Job

PDF download Download Article
  1. Clamp down the item you're working on so it doesn't move around. When applying the wire brush to the edge of something, position the angle grinder so the brush spins away from the object you're grinding rather than into it. [2]
    • Try buzzing off dirt that's set on garden tools. It will even work on set-on cement.
    • Pick the cup wire attachment for flat surfaces and the wheel to get into crevices.
  2. A cutting wheel works much like a saw. You press it lightly on the object you want to slice through, and it will make short work of things like metal rebar and tile. [3]
    • Make sure to pick the right type of blade for the project you're working on. For metal, a cutoff wheel works well, and it's fairly cheap.
    • For masonry, tile, and concrete, choose a diamond wheel. Read the attachment to know what materials you can use the wheel on. [4]
    Advertisement
  3. If you have loose mortar in your brickwork that you need to replace, use this wheel to do the job. Run the wheel between the bricks, making several passes to get it all out. Try not to get closer to the brick with the tool than 1 ⁄ 8 inch (3.2 mm). [5]
    • Pick a tuckpointing wheel that's about the width of your mortar to make the job go faster.
  4. Metal tools get dull from time to time, including things like ice scrapers, lawn mower blades, hoes, and hatchets. Press a grinding wheel up against the edge with the grinder off, positioning it perpendicular to the blade. Adjust the grinding wheel so that it's at the same angle as the edge of the blade and the wheel will turn away from the edge rather than towards it. Lift the wheel off for a moment. Turn the grinder on and make several light passes along the blade, following the correct angle. [6]
    • Don't let the blade get too hot, as it will become very brittle. If it turns black or blue, give it a rest for a moment.
    • Check the wheel for the arrow showing you which direction it will rotate when on.
    5. Advertisement
Method 2
Method 2 of 3:

Operating an Angle Grinder Safely

PDF download Download Article
  1. One of the main dangers of an angle grinder is flying debris, including pieces breaking off of the tool's attachments. Protect yourself with safety gear so you don't catch a piece in your eye. [7] Safety goggles are good, but a full face shield is better. Also, protect your arms and hands with work gloves and long sleeves. [8]
    • Put in ear plugs or cover your ears with noise-canceling earmuffs, as the sound from the machine can get very loud.
    • Wear a dust mask for particularly dusty jobs, like sanding and grinding mortar. [9]
  2. Grasp the handle with 1 hand. If your tool has a dead-man switch, hold onto that with this hand. A deadman's switch is one you must continually hold in place while the tool is on for it to work. Use your other hand to hold the weight of the tool.
    • Grab the handle with whatever hand feels most comfortable.
    • The deadman's switch is a safety feature. If you accidentally drop the grinder, it will go off automatically.
  3. Hit the power button to turn it on. Whether you're cutting, grinding, or sanding, allow it to come up to speed to help you keep your actions smooth and consistent. For instance, if you're cutting through metal or other materials, you'll get a better cut if the cutting disc is at full speed first.
  4. Don't keep the tool in one place when sanding, as you could end up with gouges. For a smoother finish, move in a rotating motion over the surface. If you're trying to smooth or clean one particular area, don't hold it in place; just move it around and over the area until it's to your satisfaction. [10]
  5. Let the tool do the work for you. In fact, just hold the grinder on the object, and the rotation will cut or grind for you. If you press down too hard, you could cause the tool to yank on the piece you're working on, which in turn could make the tool kick. When a tool kicks, it could lead to injuries.
    • With sanding, you can apply a bit more pressure.
  6. For sanding, apply the tool at a 5°-10° angle to the work surface. [11] For grinding, try a 15°-30° angle; make sure you're using the flat part of the wheel when using this attachment.
    • With cutting, use the side of the wheel to cut the piece head-on, meaning you should hold the wheel perpendicular to the piece you're cutting.
  7. The guard may get in the way on some projects, but don't take it off. It provides some protection from flying debris if the wheel or attachment shatters. It's much better for the guard to take the hit then your torso or arms! [12]
  8. If the wheel is still spinning at all, it can move around on the surface you set it on. Apply the braking system if yours has one to make sure it's stopped. Otherwise, just wait for it to come to a full stop. [13]
    • It might start cutting things you don't want to cut or even flip back towards you.
  9. You don't want the tool to come on accidentally, and turning it off is not enough. Unplug it from the wall so there's no chance it could come on and harm you or someone else.
    • Set the grinder wheel-side up on a table when you're not using it.
    10. Advertisement
Method 3
Method 3 of 3:

Picking Angle Grinders and Accessories

PDF download Download Article
  1. You can find much larger grinders for projects, but this size will be fine for a variety of tasks, including most of the jobs you'll do in your home. Also, it's a common size, so look for it in most hardware stores. [14]
    • Plus, a larger tool is more difficult to handle, which can lead to injury if you're not careful.
  2. If you want to use the grinder for a number of projects, try not to get the cheapest one. If you spend a little more, you can get a better quality machine. Pick a motor that pulls 5-9 amps, which will give you a little extra power and will likely stay in operation longer. [15]
  3. All accessories will have a maximum RPM (rotations per minute). Exceeding that RPM could lead to the attachment breaking apart and sending flying pieces at you. Therefore, the RPM of the accessory needs to match or exceed the max RPM of the grinder. [16]
    • That way, if you turn your grinder to max, you still won't go over the max speed of the accessory.
  4. A wheel brake system will stop the grinder quickly if you need it to. Plus, it allows you to bring the grinder to a full stop before you set it down. Opt for a grinder that has this safety feature if you can. [17]
    • A grinding disc with noise reduction and a handle that reduces vibrations can also make your grinder safer.
    5. Advertisement

Common Questions: Best Uses & Practices for Angle Grinders

What would you use an angle grinder for?

You can use an angle grinder for a variety of different home projects, like slicing through and polishing metal. You can also use it to slice through stone and tile, to give your tools a sharper edge, and to expel mortar from between bricks. [18]

What should you not cut with an angle grinder?

Wood should never be cut using an angle grinder. Some people choose to switch out their angle grinder blades with circular saw blades, but this is a very, very bad idea. Limited research shows that slicing wood with an angle grinder is dangerous and can lead to injury. [19]

Is it OK to use an angle grinder without a guard?

No, it’s not a great idea to use an angle grinder without a guard. The guard helps prevent debris from flying in your direction. If you operate an angle grinder without one, you could be putting yourself at risk. [20]

Which direction do you cut with an angle grinder?

Cut into surfaces at a 90-degree angle so you’re completely perpendicular to the material. Make sure that the blade’s rotation is turning in the direction of the project (rather than toward you). [21]

Can you put a saw blade on an angle grinder?

No, this is a bad idea. While angle grinders are very versatile tools, they aren’t replacements for circular saws and shouldn’t be used as such. Installing a saw blade in your angle grinder can lead to injury, and definitely isn’t recommended. [22]


Video

Tips

  • Run your grinder for a minute or two before using it to be sure that the wheel and handle are attached properly and that there are no defects.
    Thanks
    Helpful 30 Not Helpful 7
  • Position your work so that any debris is deflected down toward the floor, rather than into your face.
    Thanks
    Helpful 25 Not Helpful 14
  • If you are grinding metal, be sure to apply light pressure to avoid overheating the metal and keep a bucket of water and a rag handy to drench the metal and keep it cool as you grind.
    Thanks
    Helpful 26 Not Helpful 21
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

You Might Also Like

How to
Wrap a Knife Handle with Paracord
How to
Close a Pocket Knife
How to
Measure Chainsaw Chain
How to
Use a Cutting Torch
How to
Replace an Axe Handle
3 Easy Ways to Sharpen a Pocket Knife at Home
How to
Sharpen a Hand Saw
How to
Sharpen Pinking Shears
How to
Use a Punch Down Tool
How to
Use a Reciprocating Saw
How to
Sharpen an Axe
An Ultimate Guide on How to Use a Laser Cutter
How to
Loosen up a Stiff Knife
How to
Cut a Straight Line
Advertisement

References

  1. ↑ Alberto DeJesus. Construction Specialist. Expert Interview. 15 December 2021.
  2. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  3. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  4. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  5. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  6. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  7. ↑ Alberto DeJesus. Construction Specialist. Expert Interview. 15 December 2021.
  8. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  9. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  1. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  2. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  3. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  4. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  5. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  6. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/
  7. ↑ https://www.protoolreviews.com/news/how-to-use-an-angle-grinder-includes-pro-secrets/40958/
  8. ↑ https://www.aisc.org/globalassets/modern-steel/archives/2018/07/alessoninanglegrindersafety.pdf
  9. ↑ https://www.bobvila.com/articles/angle-grinder-uses/
  10. ↑ https://pubmed.ncbi.nlm.nih.gov/33559580/
  11. ↑ https://www.osha.gov/sites/default/files/2018-12/fy15_sh-27664-sh5_Toolbox_Angle_Grinder.pdf
  12. ↑ https://www.fabtechexpo.com/blog/2020/05/01/tips-for-improving-cutting-performance-with-angle-grinders
  13. ↑ https://pubmed.ncbi.nlm.nih.gov/33559580/

About This Article

Article Summary X

To use an angle grinder, support the tool with both hands, hit the power button to turn it on, and let the grinder come to full speed. Next, apply the grinder to the surface with light pressure to cut or grind the object. If you're sanding or cleaning the surface, be sure to keep the grinder moving around constantly. Once you're finished with the tool, let it stop spinning completely before putting it down. For tips on using the correct angle for your wheel attachment, read on!

Did this summary help you?
In other languages
Thanks to all authors for creating a page that has been read 201,478 times.

Reader Success Stories

  • Lloyd Wilson

    Mar 21, 2016

    "Excellent! Gives a newbie like me the confidence to develop safe, effective work methods from the start. Well ..." more
More reader stories Hide reader stories
Share your story

Did this article help you?

Advertisement