How to Distill Wine

PDF download Download Article
PDF download Download Article

Distilling wine at home is a natural step for anyone involved in creating their own alcoholic beverages. To distill wine, you’ll need to set up a copper still inside a water bath. Heating the bath separates the alcohol, which you can collect as it drips out of an attached tube. After throwing out the foul-smelling parts, enjoy your custom-made brandy in the comfort of your own home!

Part 1
Part 1 of 3:

Setting up the Still

PDF download Download Article
  1. Copper alembic pots are used by amateur and professional distillers alike. They come in a variety of sizes, but the 1 litre (0.26 US gal) and 2 litres (0.53 US gal) liter options are the most manageable ones when distilling at home. Alembic pots can be purchased online. [1]
    • Alembic pots start at a price of $130 US for a 1-liter still.
    • If you’re a beginner, consider using a copper teakettle as a still. It’ll give you a chance to try distilling before making a big purchase.
  2. The pot has to be large enough to contain both the still and water. Dutch ovens are a perfect option for this and can hold a two-liter still.
    Advertisement
  3. Pour the tap water into the Dutch oven. Don’t fill it too much or else it’ll overflow later. [2]
  4. Pour the wine into the still, not the Dutch oven. If you fill it more than this, the wine will bubble out the top when you heat the still.
    • You can use any wine purchased from a store. The amount you’ll need depends on the still you’re using.
    • Once you get the hang of distilling, try it with homemade wine !
  5. First, place the lid on the still. The condenser is the arm coming out the lid's top. It has a spout you attach the copper tube to. Place the other end of the tube in a spout inside a separate bucket. Many times, all of these parts are included with the still.
    • Some condensers have multiple spouts. The spout facing downwards attaches to a tap. Attach a second tube to the upwards spout and lay the other end in the sink.
    • If you don’t have these parts, you can make your own condenser coil with copper tubing and a bucket.
  6. Fill the bucket, not the still. The water needs to be cold in order to chill the evaporated wine into a liquid. The condenser tube should be inside the bucket, emerging out from a spout on the side. As long as the tube is snug in the spout, the bucket shouldn’t leak water.
    • If something doesn’t fit tightly on the still, mix 1/2 of a cup of rye flour with 3 tablespoons of water. Place the paste around the loose area. When the still heats, the paste will form a seal. [3]
  7. Have a lot of glasses on hand, since you’ll need to rotate them out to catch the distillation as it drips. For the first glass, you can use a large jar or bottle. The first 50 millilitres (1.7  fl oz) won’t taste good, so you’ll throw it away anyway.
    8. Advertisement
Part 2
Part 2 of 3:

Heating the Wine

PDF download Download Article
  1. Keep a close eye on the still. If the water gets too hot, it’ll boil and cause the distillation to drip into the glass faster. As soon as you see it begin to drip, you’ll need to adjust the temperature. [4]
    • A faster drip speed means less alcohol is being captured in each drip. You can adjust the drip speed to your preferences as you practice distilling.
    • Never use an open flame. When distilling indoors, an electric burner is your safest option. You can use a propane or natural gas burner outdoors.
  2. Aim for a water temperature of about 78 °C (172 °F). If you have a thermometer, you may be able to place it inside the condenser’s spout. Watch the drip speed to judge the temperature. When the distillate drips one to three times per second, your still is at the perfect temperature. [5]
  3. Come back frequently to see how your brandy is doing. To prevent spills, you’ll need to replace the bottles. The quality of the brandy will also improve as it drips, which you can detect either by smelling or tasting.
  4. The first 50 millilitres (1.7  fl oz) is undrinkable. It has a lot of acetone and wood alcohol, which is poisonous and smells rancid. This liquid is called the foreshot or the head. Pour it out.
  5. After the head drains, the drinkable alcohol, or heart, comes next. You can detect it by sniffing it. It’ll smell like whatever fruits and herbs were used in the wine. At this point the still has heated up more and may drip a little faster. Collect the liquid in small glasses and switch them out as they fill. [6]
    • Expect 2 litres (0.53 US gal) or less of quality brandy.
  6. Eventually, the distillate will look milky. Smell it and try to detect the fruity aroma from before. Once that odor is gone, the brandy is mixed with water and more unpleasant alcohols. This is called the tail and should be thrown away.
    7. Advertisement
Part 3
Part 3 of 3:

Cleaning the Still

PDF download Download Article
  1. Make sure your burner is turned all the way off. Give the still some time to cool down. In the meantime, you can focus on moving the brandy to a cool, dark cabinet or cellar.
  2. The Dutch oven should still have some water in it. Carefully take it over to the sink and pour it out. If you’ve let it rest for ten or fifteen minutes, it’ll have cooled. The biggest risk is dropping and breaking a good piece of cookware.
  3. The condenser coil is tubing, so it’ll pop off with a little force. Pull the lid off the still. Be sure to pull the other end of the condenser coil out of the bucket of cold water and pour that out. [7]
  4. Your ordinary dish soap is more than enough to freshen the still. Put the still under the sink and rinse it out. You can use a soft sponge to scrub away any lingering stains. Rinse out the condenser as well.
  5. Copper pots will start to turn green during disuse. Pour ¼ of a cup of vinegar into the still, then follow it with tablespoon of salt. Rinse out the still again with water. Polish the metal with a sponge to make it as good as new. [8]
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Why can"t you distill wine just like you are making moonshine and bypass the water part?
    Wulph
    Community Answer
    The water bath is rather inconsequential and suggested mainly for safety. It's a lot less likely to have a catastrophic failure (read: "explosion") with the water bath method. Also, high heat can damage the fragrant organic compounds in a wine than a simple sugar wash.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
  • Question
    What's the reason for why it needs to be copper?
    Wulph
    Community Answer
    Copper is a superior conductor of heat energy. You can use other (non-reactive) vessels but it may take longer to reach equilibrium.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    Is it safe to distill wine that has not quite finished fermenting?
    Wulph
    Community Answer
    Yes. It is safe to distill wine that has not quite finished fermenting (assuming the fermentation didn't stop due to hazardous contamination).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      • Copper still
      • Wine
      • Dutch oven
      • Clean glass jars
      • Towel
      • Glass containers
      • Dish soap
      • Water
      • Sponge

      You Might Also Like

      8 Awesome Ways to Open a Bottle of Wine without Using a Corkscrew
      How to
      Use a Corkscrew to Open a Bottle of Wine
      Simple 2-Ingredient Recipe for Homemade Chinese Rice Wine
      How to
      Make Wine from the Comfort of Home
      How to
      Drink Red Wine
      6 Ways to Open a Wine Bottle
      How to
      Drink Wine
      5 Simple Tricks to Rescue Wine and Whiskey from Broken Corks
      How to
      Open a Champagne Bottle
      How Do You Hold a Glass of Wine Properly? An Expert-Backed Guide
      How to
      Make Orange Wine
      How to
      Recork Champagne
      How to
      Make Wine out of Grape Juice
      How to
      Cut Corks
      Advertisement

      References

      1. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat
      2. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat
      3. ↑ http://yougrowgirl.com/experiments-in-plant-hydrosol-distillation/
      4. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat
      5. ↑ https://indianapublicmedia.org/amomentofscience/brandy-wine.php
      6. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat
      7. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat
      8. ↑ https://www.motherearthnews.com/diy/home/home-distilling-zw0z1212zmat

      About This Article

      Article Summary X

      To distill wine, you'll need a 1- or 2-liter copper alembic pot or copper teakettle to use as a still. Then, set up the still in a large pot, like a Dutch oven, and fill the still with wine and the pot with water. You should also connect the condenser, which is the arm coming out of the still's lid, to a bucket of cold water. Next, heat the sill over high until liquid starts to drip out the spot. Finally, once the liquid starts dripping, lower the temperature and collect the distillate in glass containers under the spout. To learn how to test your distillate, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 73,650 times.

      Did this article help you?

      Advertisement