Download Article
Download Article
One of the worst parts of tanning is unwanted tan lines, but why not take advantage of the tanning process to create tan lines you'll want -- like a tan tattoo. Enough with tan lines from a bathing suit. With a few purposefully placed stickers or intricately placed sunblock, you could have a unique "tan shape" like a heart, star or whatever you want. Because the shape is made by tanning, it's playfully referred to as a "tan tattoo." So, instead of getting "inked," get tanned.
Steps
-
Find a sticker the shape of the tattoo you want. Look for die cut stickers because they have a unique shape. This is important because you want your tattoo to take the shape of the sticker. Some common tan tattoo stickers include a heart, star, cross, a pair of lips and anything distinct enough to leave a recognizable shape.
- You also can make your own die cut stickers. Buy some sticker paper. Draw the shape you want on the paper, or use a stencil if you can’t draw. Then cut it out. [1] X Research source
- If you have an at-home die cut machine like a Cricket, you can use that to make your own stickers as well. Follow the instructions for the machine. [2] X Research source
-
Clean and thoroughly dry the spot where you're putting the sticker. You want the area where you’re putting the sticker to be clean and dry so that the sticker adheres to the skin and lays flat. Remember that the sticker has to remain on the skin long enough for you to tan, so you want it to adhere to the skin well because it may be there for a while. You don’t want it falling off. [3] X Research sourceAdvertisement
-
Place the sticker on your skin. Peel the backing off the back of the sticker. Orientate the sticker the way you want it. Whichever way you apply the sticker is how the tattoo will appear on your skin. Once you have it the way you want it, place the sticker on the skin with the sticky side down. Then, rub your finger over it, pressing firmly to smooth out bubbles.
-
Leave the sticker on as long as possible when you're in the sun or in a tanning bed. The sun will darken all of your exposed skin except the area underneath the sticker. All of the other areas around it will get darker. So,this how your tattoo will form. The tattoo will be your naked skin beneath the sticker.
- A safer alternative is to use self-tanner since you get to avoid UV rays, which can lead to skin cancer and premature wrinkling. Simply apply it over and around the sticker, making sure to cover any skin that isn't covered by the sticker.
-
Remove the sticker. After the sticker has been on long enough for you to get a tan or darken the area around the sticker, you can remove it. If you are using the natural sunlight to get a tan, then you’ll need to stay in the sun long enough to darken your skin. Everyone tans a little differently, so the length of time will vary for everyone.
- If you have a darker skin tone, it may take a little longer since your darker skin provides more protection from the skin. [4] X Research source
- If you’re using self-tanner, follow the application instructions on the bottle to determine how long to let the formula sit. You may need to leave the sticker on for a while after washing off the self-tanner, but it will depend on the brand of self-tanner that you’re using. Once you have removed the sticker, your natural skin tone will appear in the shape of the sticker you applied. [5] X Research source
Advertisement
-
Choose a shape or design for your tattoo. Make sure that it is a design you can make with a cream substance such as sunblock. You can either draw the design directly on the skin or use a stencil. If you don’t have a stencil of the shape that you like, you can always make one. Simply draw it on a sheet of paper and then use an X-Acto knife or another kind of blade to cut out the inside of the shape.
-
Apply the sunblock on your skin in the shape that you want. Do this before going out in the sun or lying in a tanning bed because you want it to be as pale as possible so it shows up well. If you’re feeling crafty, you can use a brush to apply the sunblock, but your fingers should work just fine. Whichever method you choose, make sure that the application of sunblock is fairly thick like a paste so that the sun can’t shine through it. [6] X Research source
- You’ll probably want to apply a sunblock with a high SPF of 30 or above if it takes you a while to tan. You won't have to reapply it as often. [7] X Research source
-
Leave the area undisturbed. Then, go out in the sun or lay in the tanning bed for however long is necessary for you to tan. Remember not to smear the sunblock. If the sunblock gets smeared, your tattoo might be ruined because the shape might change. Don't stress if it does smear. Just work quickly to fix it.
-
Reapply as often and as accurately as possible. Since your skin is like a sponge, it will slowly start to absorb the sunblock, and over time the sunblock will probably shift around. So, you’ll need to reapply it or touch it up until you are tan.
- Be careful to reapply neatly so you don’t mess up your design. Once you’ve set out in the sun long enough to tan, remove the sunblock.
Advertisement
-
Cut the negative of a black and white film that you like. Only cut out the darkened section where the image appears. After you do that, you should have a rectangle. This will be your template or stencil for your tattoo. You’ll use it in a similar way to how you use the sticker in the”sticker method,” but instead of having a shape as your tattoo, you will have an image. [8] X Research source
-
Tape the film negative to your skin with clear tape.Try not to cover the photo section of the negative. You don’t want to cover that section of the negative because the image might not transfer properly. The properties of the film are what makes the image transfer. [9] X Research source If you cover it with tape, it may not work as well or at all. Put just enough clear tape on the edges of the negative to hold it on your skin.
-
Sit out in the sun to tan as you normally would. Make sure you sit in a sunny spot so that the sun hits the negative. Let the UV rays penetrate through the negative. When you pull it off, you'll have the photograph imprinted on your skin. [10] X Research source
Advertisement
-
Wash and dry the area where the tattoo will go. This method is similar to the “sticker method” in that the tattoo application area should be clean. They are similar in that you need the skin to be clean and dry to get the sticker and the polish to adhere to the skin. Dry the area well before moving on to the next step.
-
Paint a design onto the skin with nail polish. You can use a stencil if you need to, or you can make one with a sheet of paper as mentioned above in the “sticker method.” Make sure your design is neat when you apply it. Remember your tattoo will take the exact shape of the nail polish, so be exact.
- Don’t use a clear polish because the light will still shine through, but beware of using a polish so dark that it stains your skin. Try using an opaque shade that doesn’t stain your nails. Hopefully, it won’t stain your skin either. [11] X Research source
-
Let the nail polish dry before heading out into the sunshine. You don’t want the sunlight shining through the polish and tanning the area designated for your tan tattoo. Hang out inside for a bit while the polish dries.
-
Go tan in the sun. While you are waiting for your tan tattoo to appear, go relax in the sun. Read a magazine. Sit by the pool, or sleep for 20 minutes. Don’t touch the nail polish in case it is tacky; it will smear and mess up your design. Peel the nail polish off after tanning, and your simple tattoo design will appear. [12] X Research source
Advertisement
Community Q&A
Search
-
QuestionShould I use sunscreen or a sticker?Amber !Community AnswerA sticker would be easier -- you'd have to reapply the sunscreen every so often.
-
QuestionWill it wash out if I go in the pool with the nail polish?Community AnswerYes, it might come off, especially if it is wet. If it is dry, it could easily be rubbed off in the water. It would be best to finish tanning before hopping into the pool.
-
QuestionIf the sunscreen gets wet, will it rub off with the tan tattoo?Community AnswerThe tan tattoo is a coloration of your skin. If the sunscreen comes off than the tattoo may not be as distinct or clean as you want but once the tattoo is there it should last for a couple of weeks or whenever the tan fades away. This is not something that you can wipe away.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Most nail polish contains toxins. Opt for a non-toxic brand for applying it to the skin.Thanks
- Darkening of the skin is caused by an increase of the pigment melanin in the skin's cells after exposure to ultraviolet radiation. Melanin is produced by cells called melanocytes and protects the body from direct and indirect DNA damage.Depending on a person's genetic profile, some people can tan quickly and deeply whereas others do not tan much at all.Thanks
- Too much sun exposure and UV rays can lead to premature wrinkling, sun spots, and even skin cancer.Thanks
- Do not overexpose yourself to the sun, as you can get sunburned.Thanks
- Self-tanner is a safer alternative to sun exposure.Thanks
Advertisement
References
- ↑ http://stickerobot.com/blog/clear-vinyl-stickers/die-cut-sticker-drawing-printing-tutorial/
- ↑ http://www.artistshelpingchildren.org/grasshoppers-crickets-craftsideas.html
- ↑ https://www.carstickers.com/instructions.php
- ↑ http://www.cosmopolitan.co.uk/beauty-hair/a27297/how-to-get-the-best-safe-tan/
- ↑ https://www.birchbox.com/magazine/article/self-tanning-tips-st-tropez
- ↑ http://www.skincancer.org/prevention/sun-protection/sunscreen/sunscreens-explained
- ↑ http://www.webmd.com/beauty/sun/high-spf-sunscreens-are-they-better
- ↑ http://users.rcn.com/stewoody/darkcam2.htm
- ↑ http://www.feelingnegative.com/darkroom/developing-paper-negatives
About This Article
Article Summary
X
To make a tan tattoo, start by finding a sticker in the shape of the tattoo you want. Next, clean and dry the area you want to apply the sticker to so it adheres correctly. Then, press the sticker firmly onto your skin and keep it in place until your skin tans in the sun. To finish, remove the sticker to reveal your tan tattoo, which will appear as a lighter area of skin tone alongside your tanned skin. For tips on how to make a tan tattoo using sun block or nail polish, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 447,033 times.
Reader Success Stories
- "My mom, my boyfriend, and I did the sticker method. I did a super intricate design of hello kitty, he did the same with dear daniel, and my mom just did a fish. They all turned out great because we used a spray on sunscreen so the stickers would stay on." ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"My mom, my boyfriend, and I did the sticker method. I did a super intricate design of hello kitty, he did the same with dear daniel, and my mom just did a fish. They all turned out great because we used a spray on sunscreen so the stickers would stay on."
..."
more
"I find this really cool; instead of using ink injected under your skin, using the sun is much safer and better."
"It worked."
