How to Repair a Zipper when the Slider Has Come Off Completely

PDF download Download Article
PDF download Download Article

Ugh! Your zipper slider has completely separated from the rest of your zipper. What are you supposed to do now? Not to worry—all you need is a pair of pliers and some top stops or square tabs to get your zipper moving again. We’ll walk you through how to get your zipper slider back on track, as well as simple ways to finish up the repair and keep the slider in place. Before you know it, your zipper will be back in working order again!

Part 1
Part 1 of 2:

Removing Zipper Teeth to Get the Pull Back On

PDF download Download Article
  1. Get a new zipper pull if yours is damaged. If your slider is broken and not working properly, then you will need to buy a new one. You can find a replacement zipper slider in a craft store.
    • Make sure to get a replacement zipper pull that is the same size and style as your old one for the best results. Bring the old one along for comparison.
    • You can also purchase a zipper repair kit at most craft stores and it will contain everything you need to replace the pull and add top stops and square tabs as needed. Otherwise, you will need to buy the replacement zipper pull, and stop tabs or top stops separately.
  2. To get the zipper back on, you will need to expose some of the fabric at the end of the zipper. Pull the zipper teeth off one at a time using a pair of pliers. Keep removing teeth until you have exposed about 2” to 3” (5 cm to 7.6 cm) of the fabric. [1]
    • Expose the smallest amount of fabric necessary to get the zipper pull back on. If you have a large zipper pull, then this will be closer to 3” (7.6 cm). If you have a small zipper, then you may be able to expose only an inch or two.
    • Consider the status of the zipper before you pull off the teeth. If the zipper is open, then you will need to pull the teeth off at the bottom of the zipper. If the zipper is closed, then you will need to pull the teeth off at the top of the zipper.
    • Make sure that you expose the same amount of fabric on both sides of the zipper as well. If the sides are uneven, then you may not be able to get the pull back on.
    Advertisement
  3. The direction of the pull will be different depending on whether the zipper was open or closed when the zipper came off. [2]
    • If the zipper was open, then slide the pull onto the fabric upside down, so that the pull is directed away from the zipper.
    • If the zipper was closed, then slide the pull onto the fabric right side up, so that the pull is directed towards the zipper.
  4. To get the zipper pull from the fabric part of the zipper to the zipper part of the zipper, you will need to tug on both sides of the fabric above the zipper pull. This will create tension and move the pull towards the zipper teeth. [3]
    • Keep tugging until you feel a click. This indicates that the zipper pull is on the teeth again.
  5. Try to move the zipper up and down a few times to see how it is working. When the zipper is back on the zipper teeth, it should zip up and down with ease. If it is crooked or not moving, then you may need to start over and try again. [4]
    • Make sure that you do not zip the zipper off the track again before you secure the end with a new top stop or square tab.
    6. Advertisement
Part 2
Part 2 of 2:

Adding Top Stops and Square Tabs

PDF download Download Article
  1. After removing some teeth from your zipper, you will need to replace some of the teeth with top stops and/or square tabs to prevent your zipper pull from coming off the zipper again. Top stops are small pieces that go on one side of your zipper. [5] Square tabs are larger pieces that will bridge across your zipper and prevent the zipper from coming down on both sides while also covering the gap between the zipper sides.
    • Top stops are best for the top of your zipper because they will prevent the slider from coming off again, but they will not prevent you from opening and closing the zipper.
    • Square tabs (also known as zipper bottom stops) are best for the bottom of a zipper because they will prevent the zipper from coming off and cover the gap in the zipper left by the missing teeth.
  2. If you want to add a top stop to keep your zipper from coming off the slider at the top, then place the top stop right above the first tooth at the top of your zipper. The zipper will need to be slightly open for you to do this. After you have the top stop where you want it to go, use the pliers to crimp the top stop into place. [6]
    • Make sure that the top stop is snug and will not move or come off when you pull on it.
    • Place a top stops on both sides of the zipper to ensure that the zipper will not come off of the track again.
  3. If you want to use a square tab to close the gap at the bottom of a zipper, then take the square tab and push the prongs through the zipper fabric on both sides of the zipper. Insert the prongs right below the bottom teeth of the zipper. Make sure that the zipper is closed when you do this. After pushing the prongs through, turn the garment or fabric over and use your pliers to bend the prongs inward. [7]
    • Make sure that you crimp the prongs down well so that the tab is secured and the prongs are flat. It is important for the prongs to be flat so that they will not snag on anything or scratch your skin.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    My zipper came off completely. Once I get it on can I glue both ends or is sewing better?
    Community Answer
    If your entire zipper has become detached, it is probably best to sew it back in place. Stitches will hold your zipper in place more reliably than glue, and glue also has the potential to interfere with the teeth of the zipper if it is not applied with care.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 31
  • Question
    My zipper has gotten snagged on the fabric. What is the best way to get it loose?
    Community Answer
    First of all, don't rush yourself. Try to peel out the fabric stuck in the zipper by slightly moving the zipper, or grab a toothpick and try to pluck it off.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 30
  • Question
    The stop on my separating jacket zipper has frayed off. Is there anyway to replace it without buying a new zipper? Its a 32" separating zipper
    Community Answer
    There is no easy way to replace the bottom stop on a split/separating zipper, especially if the fabric of the zipper tape is frayed. You may need to replace the entire zipper. If one of the top stops is missing, you can crimp on a replacement stop with pliers if the fabric is not too damaged.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 21
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Zipper slider
      • Pliers
      • Ruler or measuring tape
      • Top stops (for securing top of zipper)
      • Square tabs (for securing bottom of zipper)

      You Might Also Like

      How to
      Install a Residential Telephone Jack
      How to
      Build a Straight Form for Concrete
      How to
      Fix a Separated Zipper
      How to
      Replace a Zipper Pull
      How to
      Fix a Jean Zipper
      How to
      Stop a Zipper from Unzipping Itself
      How to
      Fix a Zipper on a Suitcase
      How to
      Fix a Broken Zipper
      How to
      Replace a Zipper
      How to
      Make a Zipper Slide More Easily with Household Items
      How to
      Repair an Invisible Zipper
      How to
      Remove Salt Build up on a Zipper
      How to
      Fix a Tent Zipper
      How to
      Add a Zipper to Boots
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=MKiee5nZFlw
      2. ↑ https://www.youtube.com/watch?v=MKiee5nZFlw
      3. ↑ https://www.youtube.com/watch?v=MKiee5nZFlw
      4. ↑ https://silverbobbin.com/how-to-fix-zipper-that-separates/
      5. ↑ https://www.popularmechanics.com/home/interior-projects/a30997350/how-to-fix-a-zipper/
      6. ↑ https://www.popularmechanics.com/home/interior-projects/a30997350/how-to-fix-a-zipper/
      7. ↑ https://silverbobbin.com/how-to-fix-zipper-that-separates/

      About This Article

      Article Summary X

      If the slider has come off your zipper completely and the old slider is damaged, you may need to get a new slider at a craft store. To put the new slider on, use pliers to remove the teeth from the top of the zipper on the side where the slider was attached. Pull off enough teeth to expose about 2-3 inches (5-7.6 cm) of fabric. Work the new slider down over the exposed fabric and onto the teeth. Pull the zipper taut on either side of the slider until you feel it pop into place. Test the zipper with the new pull to make sure it works. You may need to add a new top stop or square tab to the top or bottom of the zipper to keep the slider from coming off again. You can buy these at craft stores and install them easily with pliers. To learn how to attach a top stop or square tab, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 3,209,481 times.

      Reader Success Stories

      • kf auy

        Feb 2, 2020

        "My stupid washer ruined many washer bags, which I threw away. It did it again to a brand new one with the zipper ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement