How to Be Tested for Mold Exposure

PDF download Download Article
PDF download Download Article

If you think you've been exposed to mold, you might be wondering whether you should see a doctor. We'll help you understand what symptoms to watch for, the types of test your doctor will do, and how to check your environment for mold.

Method 1
Method 1 of 3:

Getting a Medical Examination

PDF download Download Article
  1. There is no need to worry about life-threatening conditions after an exposure to mold—especially if you aren’t allergic. To determine whether mold exposure is actually causing you harm, schedule an appointment with your primary care doctor. Show up and describe the symptoms that you’re experiencing. [1]
    • Don’t assume that you need to run off to the doctor as soon as you see mold. If you aren’t experiencing any symptoms and you’re not allergic, there isn’t any cause for serious concern so long as you have the mold removed . [2]
    • Mold (such as coccidioides) can grow in certain soils, and it's possible to inhale the spores and develop pneumonia. This can cause flu-like symptoms that last for weeks to months. It's most common in the southwestern United States (California and Arizona), as well as parts of Mexico, Central America, and South America, and you don't need to worry about it if you don't live in these areas.
    • If you have an allergy to mold, your symptoms may include sneezing, itchy eyes, coughing, and wheezing.
    • According to the CDC, all types of mold should be treated with the same degree of seriousness. See your doctor if you have symptoms of an allergy or illness, and take steps to clean the mold, regardless of what type of mold it is.
    • You should seek medical help immediately if you experience shortness of breath, chest pain, memory loss, or lethargy after a prolonged exposure to mold. Some bacteria can build up in your lungs and cause infections if you’re exposed to mold for too long. These infections are extremely rare, though. The treatments for mold-based infections are typically steroids or antibiotics. [3]
    • The private companies and labs that perform tests for “toxic mold exposure” tend to be pseudoscientific and unreliable. Consult your doctor first before going to a private company for testing.

    Tip: There is no such thing as “toxic mold.” There are toxigenic molds that can promote the growth of dangerous bacteria, but these molds are quite rare. The mold itself isn’t dangerous if the bacteria growing on it is safe. There is no way to determine whether mold is harboring dangerous bacteria or not without getting it tested by a laboratory.

  2. Allow your doctor to examine you and answer any of their questions. During your examination, tell your doctor that you’re worried about mold exposure. It’s possible that you may have an allergy to mold, and your doctor will be able to answer any of your questions and take a closer look at your skin, eyes, and nasal passages. [4]
    • While mold can be a lung irritant in people that are not allergic to it, the medical consensus is that mold exposure is not life-threatening. In most cases, you can remove the mold from your environment and your symptoms will clear up. [5]
    Advertisement
  3. If your doctor is concerned that you have an allergy to mold, ask to get a test to confirm your allergy. If your doctor believes that it is appropriate, they will refer you to an allergy specialist. Follow your doctor’s post-care instructions to ensure that your symptoms do not get worse. [6]
    • Your doctor may tell you to take antihistamines or decongestants to curb your symptoms. Keeping your windows closed and running a dehumidifier will also help curb symptoms from a mold allergy. [7]
    • Some primary care doctors will be able to perform the allergy test in their office.
  4. Go to your allergy specialist’s office and explain that you need a skin test for a mold allergy. The allergy specialist will apply a small amount of concentrated mold and study your skin’s reaction. If you are allergic, the doctor will prescribe a steroid, antihistamine, or decongestant to help your symptoms. [8]
    • If the mold is in your home, you will need to remove it by either hiring a professional mold removal company or removing the mold and repairing the affected rooms, floors, or areas.
    • There is a blood test for mold exposure, but the skin test is the most common form of the test.
    5. Advertisement
Method 2
Method 2 of 3:

Taking a Mycotoxin Test

PDF download Download Article
  1. If you really want a more in-depth picture of your mold exposure, ask your doctor or allergy specialist for a mycotoxin test. Mycotoxins are toxic compounds that grow and feed on mold, and may be the source of your symptoms if you’ve been exposed to mold for an extended period of time. [9]
    • You're more likely to be exposed to mycotoxins if you work in agriculture, and it's considered an occupational risk. It's best to take precautions to limit your exposure.
    • The only type of mold that produces mycotoxins in high amounts is stachybotrys, which is commonly known as “black” mold. They can often grow on moldy food as well.
    • There are 3 major mycotoxins: trichothecenes, aflatoxins, and ochratoxins. Your test may break your results down into these subcategories.

    Tip: Your doctor may recommend against a mycotoxin test. Mycotoxin tests tend to be unreliable and difficult to interpret. There is also a serious debate in the medical community over whether mycotoxins are dangerous when present in small amounts.

  2. This test done may be completed by your doctor or your allergy specialist, but you’ll probably be sent to a private laboratory or diagnostic office for the exam. There are 3 different forms of the test, so either submit your urine sample, nasal tissue, or allow the clinician to inspect your skin and hair. [10]
    • There is no major difference between the 3 tests in terms of the results.
  3. After you’ve submitted your sample, wait 1-6 weeks for the lab to process your results. In the meantime, follow your doctor’s after-care instructions and limit your exposure to damp rooms, expired food, and humidity. [11]
    • Mold particles are everywhere, so you may not be able to limit your exposure completely. Staying in dry areas and eating a healthy diet is a great way to limit your exposure to mold.
  4. When you receive your results, schedule another appointment with your primary care doctor. Show up for the appointment and share your results with the doctor. They will be able to refer you to a specialist and go over your results with you. [12]
    • If you do have an issue with mycotoxin exposure, the treatments include oxygen therapy, nutritional changes, and immunotherapy.
    5. Advertisement
Method 3
Method 3 of 3:

Testing Your Home for Mold

PDF download Download Article
  1. Put on a dust mask and a pair of rubber gloves. Go around your home and inspect the walls, ceilings, and floor . Look for discolored floorboards and drywall. Inspect your basement thoroughly and look under your crawl space if you have one. Note any locations where you find black, red, or brown residue. [13]
    • Be sure to check behind your refrigerator, in your air vents, and behind large pieces of furniture.
    • Mold usually looks like a dusty debris that clings to moist or damp surfaces. It may look fuzzy or wet.
    • Pay attention to the smell in the air. Mold has a distinctive scent and it often smells like wet leaves or soil.

    Tip: If your mycotoxin test came back positive, keep a keen eye out for black molds. Black mold is the only commonly-found mold that produces mycotoxins.

  2. A moisture meter cannot detect mold on its own, but it does an excellent job at narrowing down where mold will grow. Purchase a moisture meter online or in a construction supply store. Turn it on and walk it around your home to read the moisture levels in the air. Moisture meter results are color-coded, and any room that shows up in the green is unlikely to cultivate mold. [14]
    • The yellow category means that the moisture levels are higher than average. Red is a sign that you have serious moisture problems in the area.
    • To reduce moisture in a room, improve the ventilation by turning a fan on and put a dehumidifier in the room.
  3. To confirm the existence of mold in your home, hire a professional mold testing company to inspect your building. A professional service is the only surefire way to determine whether or not mold is an issue in your home. If they do find mold, they will be able to determine the best course of action to remove the problematic fungus. [15]
    • A professional testing surface will cost $100-300, but it’s the only way to diagnose your mold problems accurately.
  4. DIY mold testing kits are commonly sold for $20-60. Purchase a kit online or at a construction supply store. To use one of these kits, unpack the materials and read the instructions carefully. Usually, you leave a small petri dish out in an enclosed room for 24-48 hours. The chemical in the petri dish will absorb mold particles from the air. Put a lid on the dish and seal it. Check it after 2-4 days to see if mold has grown inside the dish. [16]
    • DIY kits are less reliable than a professional service when it comes to identifying mold.
    • If mold grows inside the dish, you have a high percentage of mold in your air. You can send the dish to get tested at the manufacturer’s lab. Getting the sample tested will cost an additional $20-100.
    • If no mold grows, the odds that you have mold in your home are low.
  5. If you have a moldy object or piece of furniture, throw it out. If you have a small infestation, put on gloves and a dust mask. Scrub the surface with 1-part dish soap and 3-parts water. Let the surface dry out under a fan and repeat the process until the mold is completely gone. [17]
    • Scrub moldy tiles or caulk scrubbed clean with soap and water.
    • Don’t paint over mold. The mold will simply reappear after the paint has dried.
  6. Mold needs a moist environment to grow, so you may be able to prevent mold by keeping your home dry. Use a dehumidifier to remove the moisture in your home, especially in your bathroom and basement. Additionally, make sure your bathroom ventilation system is working so the moisture doesn't linger. [18]
    • Don't put carpet in a bathroom because it traps moisture and provides a breeding ground for mold.

    Tip: It's especially important to use a dehumidifier if your home floods. Mold can develop within 24-48 hours after a flood event.

    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • There are few documented cases of mold causing serious damage to a person. In the vast majority of cases, mold exposure is mostly just an irritant unless you’re allergic. There’s no need to worry while you’re waiting for your results to come in. [19]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Testing Your Home for Mold

      • Dust mask
      • Rubber gloves
      • Utility knife
      • Mold testing kit
      • Dehumidifier

      You Might Also Like

      How to
      Kill Mold With Vinegar
      Got Mold? How to Clean Mold with Vinegar and Baking Soda
      How to
      Remove Mold from Wood Furniture
      How to
      Clean Mold off of a Ceiling (Plus Prevention Tips)
      How to
      Get Rid of Black Mold Safely & Effectively
      How to
      Easily Get Rid of Mold in Your Bathroom and Shower
      How to
      Get Rid of Mold in a Water Bottle
      How to
      Remove Mold from Bags
      How to
      Get Mold Out of Shower Caulking
      How to
      Kill Mold Spores in the Air and Prevent Mold Growth
      How to
      Remove Mold and Mildew
      How to
      Get Mold Out of Your Carpet at Home
      How to
      Remove Mildew from Fabric
      How to
      Remove Mold from Drywall (And When to Call a Professional)
      Advertisement

      References

      1. ↑ https://www.health.ny.gov/publications/7287/
      2. ↑ https://www.health.ny.gov/publications/7287/
      3. ↑ https://my.clevelandclinic.org/health/diseases/24862-black-mold
      4. ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC145304/
      5. ↑ https://www.cdc.gov/mmwr/preview/mmwrhtml/mm6406a7.htm
      6. ↑ https://acaai.org/allergies/allergic-conditions/mold-allergies/
      7. ↑ https://my.clevelandclinic.org/health/diseases/22309-mold-allergy
      8. ↑ https://my.clevelandclinic.org/health/diseases/22309-mold-allergy
      9. ↑ https://www.cdc.gov/mmwr/preview/mmwrhtml/mm6406a7.htm
      1. ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2680627/
      2. ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2680627/
      3. ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2680627/
      4. ↑ https://www.cdc.gov/mmwr/preview/mmwrhtml/mm6406a7.htm
      5. ↑ https://www.cdc.gov/mmwr/preview/mmwrhtml/mm6406a7.htm
      6. ↑ https://www.health.state.mn.us/communities/environment/air/mold/moldtest.html
      7. ↑ https://www.bobvila.com/articles/how-to-test-for-mold/
      8. ↑ https://www.epa.gov/mold/mold-cleanup-your-home
      9. ↑ https://www.consumerreports.org/mold/how-to-prevent-a-mold-outbreak/
      10. ↑ https://www.gov.uk/government/publications/damp-and-mould-understanding-and-addressing-the-health-risks-for-rented-housing-providers/understanding-and-addressing-the-health-risks-of-damp-and-mould-in-the-home--2

      About This Article

      Thanks to all authors for creating a page that has been read 45,764 times.

      Did this article help you?

      Advertisement