Download Article
Download Article
Molds are commonly found in nature and help to break down the nutrients in soil. Inside, molds are potentially hazardous to your health. One common mold is stachybotrys atra, or black mold. While research on the effects of black mold remains somewhat limited, some existing research shows that inhaled mold, in general, can negatively affect conditions like asthma, particularly for individuals with mold allergy. [1] X Research source Black mold is commonly thought to be toxic when ingested or inhaled; however, it is no more dangerous than other types of mold. If you notice any signs mold, it is not necessary to identify the species, but if you do want to identify the mold, there are a few ways to go about it. First, do a sweep of your building to look in all mold prone areas to find any mold. Next, have a professional inspection done to identify black mold.
Steps
-
Pay attention to any smells in your building. Black mold has a mildew or musty smell. If your building smells like this, try to follow the smell to the source of the mold. If you cannot see the mold, it may be behind a wall or in another well covered space. [2] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Observe the color of the mold. Black mold is, well, black. Other molds are often white, green, yellow, or any number of colors, and they can be dangerous, too. Also note that black mold commonly refers to stachybotrys atra, but there are other molds that are black in color. [3] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
- Stachybotrys atra can also be found in colors other than black.
Advertisement -
Note the texture of the mold. Black mold will have a wet, slimy texture. Other molds can have a light, fuzzy texture. Avoid touching the mold with your bare hand. Observe the texture by wiping the mold with a towel or other material. [4] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
Advertisement
-
Seek out naturally damp areas. Mold typically grows in well-saturated areas. Basements, bathrooms, kitchens, and garages are commonly invaded by black mold. If you suspect mold in your building, start looking in the rooms that hold the most water. [5] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Inspect any leaks. Even if an area is not normally water-prone, a leak can lead to mold. Leaky water pipes are often culprits, but you can have other sources of water, too. If your air conditioner is not properly drained and insulated, it can leak water. This can result in black mold around the leak. [6] X Research source
-
Look at joints. Porous materials such as grout are often used to join two slabs or panels. For example, kitchen and bathroom tiles often have grout between them. If water frequently gets into the pores in the grout, black mold can grow there. [7] X Research source
-
Check any seals. Sealants can also be prone to growing black mold. Sealants are often used in high moisture areas (e.g. around your shower). Because of this, black mold can set up and grown on a sealant, such as calk. [8] X Research source
-
Watch materials high in cellulose. Black mold naturally grows on materials containing cellulose. These are plant based materials such as paper, cardboard, and wood. Keep a close eye on any paneling or file cabinets that get wet. Any wood, drywall, carpet, or cloth can easily grow black mold under moist conditions. [9] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
Advertisement
-
Have an inspection done. Call a local business that offers mold removal services. Many professionals will do a mold inspection for free. If no mold is found, there is no cost to you. If the inspector finds mold, they can help you remove it. [10] X Research source
-
Hire a professional for mold removal. Large amounts of black mold may be difficult for an untrained person to remove. If any area is missed, the mold spores can recolonize and the mold will grow back quickly. A trained professional will ensure that the entire area is mold-free. [11] X Research source
-
Stay safe around black mold. Mold spores can be dangerous if inhaled or ingested, but this varies person to person. Allergies are typically responsible for a person’s reaction to mold. To be on the safe side, wear a mask and gloves. Be sure that you clean the entire area to get rid of any microscopic spores that could start a new colony of mold. [12] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
Advertisement
Expert Q&A
Search
-
QuestionHow do I avoid outdoor mold?Dr. Alan O. Khadavi is a Board Certified Allergist and a Pediatric Allergy Specialist based in Los Angeles, California. He holds a BS in biochemistry from the State University of New York (SUNY) at Stony Brook and an MD from the State University of New York Health Science Center at Brooklyn. Dr. Khadavi completed his pediatric residency at Schneider Children’s Hospital in New York, and then went on to complete his allergy and immunology fellowship and pediatric residency at Long Island College Hospital. He is board certified in adult and pediatric allergy/immunology. Dr. Khadavi is a Diplomate of the American Board of Allergy and Immunology, a Fellow of the American College of Allergy, Asthma & Immunology (ACAAI), and a member of the American Academy of Allergy, Asthma & Immunology (AAAAI). Dr. Khadavi's honors include Castle Connolly’s list of Top Doctors 2013-2020, and Patient Choice Awards "Most Compassionate Doctor" in 2013 & 2014.One of the best ways is to avoid going outside right after it rains when mold spore counts are highest.
-
QuestionCan I remove black mold myself?Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.Avoid removing black mold yourself. Bring in a professional to clean black mold because if the spores are released, it is dangerous to your health. If you do try to remove it yourself, seal off all the affected areas and wear heavy protective gear. Also, use proper mold-killing chemicals — bleach does not kill mold.
-
QuestionHow do you know if mold is black mold?Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.Black mold has a distinct smell, which is close to dirt and the underside of wet, rotting leaves. The mold is also, of course, black in coloring.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Look for other molds near the black mold. [13] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.jacionline.org/article/S0091-6749(05)02591-1/fulltext
- ↑ https://www.cdc.gov/mold-health/about/index.html
- ↑ https://www.cdc.gov/mold-health/data-research/facts-stats/
- ↑ https://www.cdc.gov/mold-health/data-research/facts-stats/index.html
- ↑ https://www.cdc.gov/mold-health/data-research/facts-stats/index.html
- ↑ https://www.atlenv.com/toxic-black-mold-the-deadly-myth
- ↑ https://www.atlenv.com/toxic-black-mold-the-deadly-myth
- ↑ https://www.atlenv.com/toxic-black-mold-the-deadly-myth
- ↑ https://www.cdc.gov/mold-health/data-research/facts-stats/index.html
About This Article
Article Summary
X
To identify black mold, look for mold that’s black with a wet, slimy texture or a light, fuzzy texture. As you get closer to the mold, you should also detect a strong mildew or musty smell. Additionally, note its location, since black mold is common in damp areas, such as basements and bathrooms. You can also look around water sources, like pipes and air conditioners, which can develop leaks that result in black mold. To learn more, like how to get rid of black mold safely and efficiently, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 105,936 times.
Reader Success Stories
- "This calmed me down substantially. I was aware that there were many varieties of mold and not all produce the toxins affecting health. Good to know." ..." more
Advertisement
97%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"This calmed me down substantially. I was aware that there were many varieties of mold and not all produce the toxins affecting health. Good to know."
..."
more
