PDF download Download Article PDF download Download Article

Clownfish are small, brightly colored fish that make a delightful addition to any home saltwater aquarium. They can be fun to raise and can be easily bred at home with some care, attention, and know-how. Here are some basic steps that will help you successfully breed clownfish in your own aquarium.

Breeding Clownfish

  • Get a pair of fish that are already mated or select 1 small and 1 large clownfish.
  • Watch for the female growing in size and releasing orange eggs.
  • Move the hatched eggs to a separate tank and feed the hatchlings live rotifers.
Part 1
Part 1 of 2:

Preparing to Breed a Clownfish Pair

PDF download Download Article
  1. Breeding fish is a project that should be taken on by people who are experienced with saltwater aquarium set up and maintenance. While breeding these fish is not difficult, it does require a bit of knowledge about fish feeding and life cycles, not to mention having the right supplies to assure proper tank filtration and ecosystem development.
    • If you want to begin setting up your own aquarium, you may want to consult How to Start a Saltwater Aquarium or How to Set up a Marine Reef Aquarium before diving into breeding fish.
    • Specialists usually don't recommend breeding clownfish unless you want to start an aquaculture business. It's important to think long term and not only on the cuteness of baby clownfish.
  2. Clownfish are external breeders, meaning that the female fish lays eggs and then the male fish fertilizes them after they have been laid. To make this happen you will need to get a pair of clownfish that are already bonded, in other words mated to each other.
    • Many aquarium stores will sell mated pairs specifically for clownfish breeding. If your store does not have any in stock, they can probably special order a pair just for you. Don't be afraid to ask!
    Advertisement
  3. The other way you can get a mated pair is to develop two young clownfish into a bonded pair yourself. Begin by buying two clownfish when they are still young. One of the amazing things about clownfish is that they are all born neither male or female, so you don't have to worry about getting one male and one female. [1] Any pair will do.
    • Developing into a male or female fish only occurs as the fish get older. The sex of your fish will actually be determined by the dominance of the fish when fighting each other. The dominant fish will change sex into a female and the less dominant will become male.
    • If you are keeping a lot of clownfish in the same tank, only one bonded pair will develop. The most dominant of all will become female and the second most dominant will become male. The rest will remain sexless.
    • If you want to keep the fighting to a minimum and make the fish change sex as quickly as possible, it is a good idea to get one clownfish that is larger than the other, that way it is clear from the get go which one is dominant.
  4. Clownfish are not as sensitive to water conditions as other fish can be, but keeping the water clean can make them more likely to breed.
  5. Placing anemone in the tank to make the clownfish feel more comfortable. Although this is not totally necessary, it will increase the likelihood that your pair will breed. You should also have live rock in your tank. Live rock is rock that is from the ocean and is the foundation of the development of coral reefs. The live rock will provide the fish have hiding places and will give a surface on which the clownfish can lay and care for their eggs.
  6. Keep it light during the day and dark at night on a regular schedule. This regularity will keep your clownfish more relaxed, and thus more likely to spawn.
  7. The female, the bigger of your two fish, will get thicker around her middle, indicating she is getting ready to release eggs. Both fish may also start to clean the rocks with their mouth and fins to get it ready for the eggs.
  8. Once the eggs are laid they will be orange in color and attached to the rocks. The male clownfish will care for them, swimming around them and waving his fins on them to aerate them. He may also pick off the ones that have died.
  9. Clownfish eggs go through multiple stages of development. As stated before, they begin as an orange color but shift
    • The eggs should hatch in about 7 to 10 days. You will need to feed the fry live rotifers for the first week. Rotifers are plankton that many species feed on. After that, you can start to introduce live brine shrimp. Clownfish babies will only eat live food.
  10. It does not need to be very big, a 10 gallon (37.8 l) tank will do fine for the hatchlings. Make sure the tank does not have a large filtration system but instead has an air stone that lets off little bubbles or some other more gentle means of oxygenation. [2] Too much filtration could easily kill all your tiny fry.
    • You must also provide proper lighting for the fry since they will be searching for food but their vision is not the greatest. The light shouldn't be too bright, one light bulb is sufficient, and should be as diffused as possible.
  11. Advertisement
Part 2
Part 2 of 2:

Raising Clownfish Fry

PDF download Download Article
  1. Some breeders move the eggs before they hatch but most wait until the hatchlings come out of their eggs, as moving the hatchlings is easier. Either way, you will need to raise the fry in a separate aquarium as clownfish are known to eat their own eggs and hatchlings. Be sure to get the extra tank ready ahead of time.
  2. While in the egg sack, the embryos use energy from the yoke to survive, but once they emerge, the hatchlings will need food fast!
    • Clownfish hatchlings should be fed live rotifers, which are microscopic aquatic animals. [3] These can sometimes be found at an aquarium store but you should check with yours to make sure.
    • Many clownfish breeders find it easier to breed rotifers for their hatchlings to eat, than it is to find them at an aquarium store. Make sure you have a steady supply of them before beginning the breeding process, otherwise your hatchlings will die at this stage.
  3. [4] This is important in order to keep the water clean but it also assures that the water is clear enough for the hatchlings to see the rotifers they need to eat.
  4. [5] One of the hardest transitions in the life of a clownfish is when they move from their larval stage to being a juvenile clownfish.
    • To give them a good shot at developing, transition their food from rotifers to live brine shrimp so that they can get enough energy to grow rapidly. You can also add nutrients to the water, such as those sold for keep saltwater reef tanks healthy.
  5. If the fish make it through the transition, you should start seeing the distinctive color of the clownfish develop on your fish. They should continue to grow rapidly, so make sure you continue to give them enough food and to keep their water clear and clean.
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    My clownfish won't stop laying eggs. What should I do?
    Dan Peckford
    Community Answer
    Nothing! You are lucky enough to witness one of nature's miracles. Clownfish can lay up to 1000 eggs at once! If you do not wish to raise them all, I suggest you get in touch with a breeder of clownfish or a local aquarium store and ask about re-homing all those little guys.
  • Question
    Do I have to get a live rock or can I use sand?
    Community Answer
    Live rocks are the best, no matter what type of fish you are breeding.
  • Question
    Where do Clownfish produce their eggs?
    Community Answer
    In different hiding spots that they find on live rock. The live rock will provide the fish with hiding places and will give a surface on which the clownfish can lay and care for their eggs.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Do not put different species of clownfish together. They will fight and cause each other stress, and they will not lay any eggs if that happens.
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about taking care of a fish, check out our in-depth interview with Marshall Stephens .

      About This Article

      Article Summary X

      To breed clownfish, purchase a mated pair of fish, or 2 fish that are already bonded, from an aquarium store. Place plants, anemone, and rocks in the tank, and keep the water in the tank clean, which can help make the fish more likely to breed. Turn off the lights in the aquarium at night, which may also help the fish feel relaxed enough to breed. Once you see eggs in the tank, set up a separate hatchling tank with an air stone and a diffused light. You can either move the eggs or wait until the hatchlings come out of the eggs to move them to the new tank. For tips on caring for your hatchlings, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 315,336 times.

      Reader Success Stories

      • Nicholas Smelan

        May 27, 2022

        "I am writing an essay about clownfish, and I was writing about breeding I was looking for info and I ran across ..." more
      Share your story

      Did this article help you?

      Advertisement