How to Build a Deck

PDF download Download Article
PDF download Download Article

Building a deck can add to the monetary value of your home as well as to your enjoyment of it, whether you host parties or sample the beauty of nature from it. Building your deck requires work and planning, but a properly planned and built deck can be an asset you can enjoy for years. Here are the steps to take when planning and building your deck.

Method 1
Method 1 of 3:

Planning Your Deck

PDF download Download Article
  1. Watermark wikiHow to Build a Deck
    The size of your home will have an impact on how large your deck can be, as well as its shape. [1] In most cases, your deck will also be required to support a greater load than the floors in your home.
    • Your home owner's insurance policy may not cover an accident that occurs on your deck if you didn't build your decking to comply with the building codes in your area.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/d8\/Build-a-Deck-Step-2.jpg\/v4-460px-Build-a-Deck-Step-2.jpg","bigUrl":"\/images\/thumb\/d\/d8\/Build-a-Deck-Step-2.jpg\/aid1165261-v4-728px-Build-a-Deck-Step-2.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/3.0\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Check with your local government agency regarding the need for a permit before building your deck, as well as any inspections that will be required during construction. [2]
    Advertisement
  3. Watermark wikiHow to Build a Deck
    The frost line is the depth to which the ground freezes in winter, taken over an average of a number of years. Some building codes require that when you build a deck, the support posts be sunk to a depth below the frost line. Even if it isn't required, sinking the support posts to this depth will keep the deck from buckling when the ground expands and swells when the water in it freezes. [3]
  4. Watermark wikiHow to Build a Deck
    [4] Your deck can either be free-standing or attached to the house. Although some building codes may be more relaxed on free-standing decks, most people find it more convenient to have their decks attached to the house. [5]
    • If you build your deck onto the house, you'll want to know where the rim joists and wall studs are located so you can secure the deck's ledger board, the support beam that attaches it to the house, to either of them.
    • The size of your deck will determine the number of footings and posts you'll need to support the joists and deck boards, as well as the size and spacing of the joists and the size of the deck boards. Joists can be spaced 12, 16 or 24 inches (30, 40 or 60 centimeters) apart, however a spacing of 24 inches is most common; common sizes for joists and deck boards are listed under "Things You'll Need."
    • The height at which you build your deck determines whether you need to include railings, posts and steps. You won't need them for a deck built just above the ground, but you will if it is higher than that.
    • Making a preliminary sketch of what you have in mind will help you in lining up materials and construction advice.
  5. Watermark wikiHow to Build a Deck
    There are a number of hardwoods and composite materials from which you can build your deck. Materials for deck boards range from the tropical Hardwood Ipe and plastic to the more traditional redwood, cedar and pine. The framing, columns and posts, however, should be pressure-treated or otherwise decay-resistant wood as required by code. [6]
    6. Advertisement
Method 2
Method 2 of 3:

Preparing the House

PDF download Download Article
  1. Watermark wikiHow to Build a Deck
    Usually, this will be the height of the interior floor and just below the threshold of any planned or current door that will open onto the deck. Use a level to draw a line on the siding the whole length of the deck.
  2. Watermark wikiHow to Build a Deck
    From the line you just marked, measure down the thickness of the deck boards (usually 1 to 1 1/2 inches, or 2.5 to 3.75 centimeters), plus the height of the ledger board. (If the ledger board is a 2 x 10, this will be 9.5 inches, or 23.75 centimeters.) Mark this line across the entire length of where the ledger board will go.
  3. Watermark wikiHow to Build a Deck
    If the siding is solid siding, you can cut it away with a circular saw and jigsaw, provided you don't cut into the sheathing beneath the siding. If the siding is vinyl siding, you'll need a special tool to pry up the siding; after removing it, you'll need to re-mark the lines for top of the deck and the bottom of the ledger board on the sheathing.
    • Ignore the steps in this section if you're planning to make a free-standing deck.
    4. Advertisement
Method 3
Method 3 of 3:

Building Your Deck

PDF download Download Article
  1. Watermark wikiHow to Build a Deck
    Check its fit against the house before proceeding. [7]
    • If you plan to cover your house's rim joists with the deck's skirting board, cut the ledger board shorter to accommodate the width of the skirting board (usually 3/4 inch, or 1.9 centimeters) on either side.
  2. Watermark wikiHow to Build a Deck
    First, mark off the deck's rim joists on the left edge of the ledger board. (These are usually 2 joists laid side-by-side for strength.) Then, mark the centers of where each intervening joist will go and measure half the joist's thickness from each of these marks on either side. Then, mark off the rim joists on the right edge of the ledger board. Draw lines across the ledger board surface to mark all the joist edges.
  3. Watermark wikiHow to Build a Deck
    Cut the beam the same length as the ledger board. If you plan to have the joists butt flush against this beam (a flush beam), then use a framing square to align the edges of both beams and then copy the marks in full. If you plan to have the joists rest on this beam instead (a dropped beam), you'll only need to have marks across the top for reference. [8]
    • Most building codes require the opposite beam to be twice or three times as thick as the interior joists, so as with the rim joists, you'll have to cut multiple beams and sandwich them side-by-side. (If the deck is to be a free-standing deck, the ledger board beam would also have to be sandwiched with one or two other beams for strength.)
  4. Watermark wikiHow to Build a Deck
    Check the spacing of the joist hangers with a scrap of wood the width of the joists, then nail the joist hangers in place with short, thick nails designed to secure the joists. If your opposite beam is to be a flush beam, you'll also want to attach joist hangers to the innermost member of that beam. [9]
  5. Watermark wikiHow to Build a Deck
    Tack the board in place temporarily with nails. Drill 1 or 2 holes between where every 2 joists will go. Apply silicone caulk to the inside of each hole, then sink a lag screw into each hole to secure the ledger board permanently. Cover the ledger board with a waterproof membrane or galvanized metal flashing. [10]
    • Ignore this step if the deck is to be a free-standing deck.
  6. Watermark wikiHow to Build a Deck
    You can lay out the positions for the footings using string and stakes or batter boards to form a grid. Mark the footing positions on the strings, then transfer them to the ground. Dig 6 inches (15 centimeters) below the frost line for each footing with either a post-hole digger or power auger; make the bottom of each hole wider than the top. [11]
    • You may need to have the holes inspected for depth before you can pour the concrete.
  7. Watermark wikiHow to Build a Deck
    Place one in each hole and support it with loose back-fill, then trim all the piers level to support the posts evenly. Pour concrete into the holes and let it set for at least 24 hours before proceeding. [12]
  8. Watermark wikiHow to Build a Deck
    To anchor the posts in place, set 6-inch (15-centimeter) lengths of stainless steel rod or rebar halfway into the piers to serve as drift pins and drill holes in the post bottoms before placing them. You can also cover the pier tops with adhesive before setting the posts if the tops are wooden or use anchor brackets if the tops are concrete. Plumb the posts to be level and affix temporary braces to keep the posts from moving until the framing is in place.
  9. Watermark wikiHow to Build a Deck
    If your posts are tall, you may have to raise the individual members of the beam one by one instead of together. Set the beam members such that the outermost member is flush with the edge of the post. Attach the innermost member beam with toe nails or whatever connector your building codes require.
  10. Watermark wikiHow to Build a Deck
    Connect the rim joists to the ledger board and innermost member of a flush opposite beam with inside corner brackets. Adjust the beam member to get it square if it isn't, then affix the reinforcing outer beam members to the innermost member with nails, screws or lag bolts. [13]
  11. Watermark wikiHow to Build a Deck
    Sight down each joist edge to look for any signs of bowing (crowning). Slip them into the joist hangers on the ledger board and opposite flush beam (or atop an opposite dropped beam), crowned side up. Tap them in place if necessary, and if they're too tight, trim a bit off the ends so they slip in without excessive force. If the opposite beam is a dropped beam, toenail the joists in place.
  12. Watermark wikiHow to Build a Deck
    Measure the deck frame from the outside edge of one rim joist to the outside edge of the other and add the width of any skirting or length of any overhang to it. Cut the first two deck boards to this length, then cut off the length of any overhang from the board that will be laid next to the house. (Subsequent boards need not be cut to this length, but can be laid down first and cut flush with the first two boards later.) Set the first board against the house sheathing and the next board against it if wet and the width of a 16-penny nail apart from it if dry. Attach the boards to the joists with two nails or screws. Straighten the boards as you go with a flat bar. [14]
    • If you're building a wide deck, you can cut multiple deck boards to span the distance between the rim joists, with the places where two boards meet falling in the middle of a joist. Stagger these joints between each row of decking to make the deck look nicer.
    • Periodically measure the distance from the front of the deck to each end of the last board laid. They should be equal; if not, decrease the gaps between boards slightly on the longer side and increase them slightly on the shorter side until the distances are equal again.
    • If the last deck board is wider than the space to lay it, either narrow it or use a narrower board of the same type of decking material. If the board is narrower than the space available, take a wider board and narrow it as necessary.
  13. Watermark wikiHow to Build a Deck
    If your deck is high enough to require stairs, determine the number of steps you'll need by dividing the deck height in feet by seven. If the quotient is a whole number, use the quotient as the number of steps, with a rise of 7 inches (17.5 centimeters). If the quotient includes a fraction, round to the nearest whole number to get the number of steps and divide that number into the deck height to get the rise in inches. Divide the rise into 75 to get the approximate length for each step. [15]
    • You'll need to have a stringer at either end of the staircase to attach the steps to and another stringer in the center if you have a wide or tall staircase. Lay the first stringer out with a framing square to find the rise and run, then transfer the marks to the other stringers. Cut out the step supports, then brace the stringers together and nail them to the deck's rim joist before securing them permanently with lag screws.
    • Cut the steps to have a 3/4-inch (1.9-centimeter) overhang to either side of the stringer assembly to channel rain away from the stringers. Attach them to the stringers with screws or nails.
  14. Watermark wikiHow to Build a Deck
    If your deck is more than a step high, you'll want or need to have deck railings to prevent falls. Begin by installing the corner and stair posts, plumbing them and securing them first with glue, then with either lag screws or carriage bolts. The remaining pieces—top rails, bottom rails and spindles—may be attached individually or assembled into sections and then installed as units. [16]
    • Measure the distance between posts to find the length of the rails and cut them to that length.
    • Vertical spindles usually need to be spaced to no more than 4 inches (10 centimeters) apart and should be placed closer together if it will create even spacing over the entire deck. [17] They can be attached to the rails with nails or screws, while the rails themselves attach to the posts with angle screws. (Use wooden blocks to prop up the rail sections while screwing them in.)
    • Cut the stair posts to the correct height and angle with the help of a framing square, then install the bottom stair rails and hand rails. Figure the length of the stair rails by dividing the stair rise by the run, multiplying by the deck rail length, squaring the result, adding the square of the deck rail length and take the square root of the result. Cut the spindles to the right length, angled for the slope of the rail and install as described above for the deck spindles.
  15. Watermark wikiHow to Build a Deck
    Cut the boards to cover the deck's beam and rim joists and nail them in place.
    16. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can I build a deck on my own?
    Sarah Fogle
    DIY Specialist
    Sarah Fogle is a DIY Home Improvement Specialist and the creator of Ugly Duckling House. With over a decade of experience, Sarah specializes in beginner-friendly home remodeling projects. Sarah holds an MBA from Georgia State University. She has been featured in multiple publications including Better Homes and Gardens and Make Magazine. She has also partnered with brands such as Lowe's, Home Depot, and Martha Stewart Crafts.
    Sarah Fogle
    DIY Specialist
    Expert Answer
    You can, but it might be helpful to have a helper or 2 on hand, especially when you're handling those heavy boards.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
  • Question
    How big can I build a deck?
    Sarah Fogle
    DIY Specialist
    Sarah Fogle is a DIY Home Improvement Specialist and the creator of Ugly Duckling House. With over a decade of experience, Sarah specializes in beginner-friendly home remodeling projects. Sarah holds an MBA from Georgia State University. She has been featured in multiple publications including Better Homes and Gardens and Make Magazine. She has also partnered with brands such as Lowe's, Home Depot, and Martha Stewart Crafts.
    Sarah Fogle
    DIY Specialist
    Expert Answer
    Check with the local codes in your area to see how large your deck be. While you're reading, double-check specific requirements, like whether you need railings, steps, and permits.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
  • Question
    How do I build a cheap deck?
    Sarah Fogle
    DIY Specialist
    Sarah Fogle is a DIY Home Improvement Specialist and the creator of Ugly Duckling House. With over a decade of experience, Sarah specializes in beginner-friendly home remodeling projects. Sarah holds an MBA from Georgia State University. She has been featured in multiple publications including Better Homes and Gardens and Make Magazine. She has also partnered with brands such as Lowe's, Home Depot, and Martha Stewart Crafts.
    Sarah Fogle
    DIY Specialist
    Expert Answer
    Call 811 before you get started if you live in the United States. This way, professionals can come out to, check, and mark your your yard for utility lines. Breaking a buried utility line can be a really costly repair, so taking precautions can save you some money.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Before following the above instructions, check with your local building department for any special requirements not covered above that may supersede them.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • Deck posts (4 x 4s or 6 x 6s)
      • Beams (4 x 6s, 4 x 8s or 4 x 10s, or double or triple layers of 2 x 6s, 2 x 8s or 2 x 10s)
      • Joists (2 x 6s, 2 x 8s or 2 x 10s)
      • Stair stringers (2 x 12s)
      • Deck boards (2 x 4s, 2 x 6s or 5/4 x 6s)
      • Stair treads (same material as deck boards)
      • Railing posts (4 x 4s)
      • Rails (2 x 4s or 2 x 6s)
      • Spindles (2 x 2s)
      • Skirting boards (1 x 8s, 1 x 10s or 1 x 12s)
      • Concrete (ready-mixed or bagged)
      • Concrete pier blocks
      • Exterior caulk
      • Construction glue
      • Stainless steel drift pins (1/2-inch/1.25 centimeter diameter)
      • Joist hangers
      • Metal flashing (galvanized)
      • Common and casing nails (galvanized or coated, 8-, 10- and 16-penny sizes)
      • Screws (galvanized or coated, 2 1/2-inch/6.25 centimeter and 3 1/2-inch/8.75 centimeter)
      • Lag screws and washers
      • Carriage bolts, nuts and washers


      You Might Also Like

      How to
      Build Deck Stairs
      How to
      Build Porch Steps for Your Deck or Porch
      How to
      Build a Deck Railing
      How to
      Install Lattice
      How to
      Build a Deck Around an Above Ground Pool
      How to
      Extend an Elevated Deck
      How to
      Repair Trex Decking
      How to
      Paint a Deck
      How to
      Clean a Deck with Bleach
      How to
      Build a Deck or Patio Cover
      Advertisement

      References

      1. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 27 July 2021.
      2. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 27 July 2021.
      3. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      4. ↑ Sarah Fogle. DIY Specialist. Expert Interview. 27 July 2021.
      5. ↑ https://www.decks.com/how-to/41/deck-joist-sizing-and-spacing
      6. ↑ https://www.lowes.com/n/buying-guide/deck-planning-and-materials-guide
      7. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      8. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      9. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      1. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      2. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      3. ↑ https://www.decks.com/how-to/19/deck-footing-spacing-and-layout
      4. ↑ https://www.popularmechanics.com/home/outdoor-projects/how-to/a23949/how-to-build-a-deck/
      5. ↑ https://www.decks.com/how-to/331/how-to-build-a-deck---decking
      6. ↑ https://www.familyhandyman.com/decks/building-a-deck/tips-for-how-to-build-a-deck/
      7. ↑ https://www.lowes.com/n/how-to/build-a-deck-wood-decking-and-railings
      8. ↑ https://todayshomeowner.com/video/building-handrails-for-a-wooden-deck/

      About This Article

      Article Summary X

      To build a deck, first you’ll need to nail joist hangers in place on a ledger board and attach the board to your house. Then, you’ll have to cut the beam that will go opposite the ledger board to the same length, and attach corresponding joist hangers. Next, you’ll dig holes for the footings, assemble the footings and pier forms, and raise posts over the piers. You’ll then be able to install the opposite beam on top of the posts, and put in the rim and interior joists for your deck’s foundation. Finally, you can lay down the deck boards and add deck railings. For step-by-step instructions on how to plan your deck and prepare your house before you start building, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 136,958 times.

      Reader Success Stories

      • Cece Sam

        Nov 3, 2020

        "Gave me all the materials I needed!"
      Share your story

      Did this article help you?

      Advertisement