Download Article
Download Article
If you want to increase your bird's quality of life, an aviary might be just what it needs! Aviary cages are much larger than normal bird cages and can be placed both indoors and outdoors. With a bit of planning and some effort, you can create a nice aviary for your birds that will keep them both happy and safe at all times.
Steps
-
Determine the size of your birds. Before you start your project, you need to know the size of your birds. This will affect how big your aviary will be, as well as the type of wire meshing appropriate for the birds' size. [1] X Research source
- Small birds are budgies, canaries, doves, finches, and lovebirds.
- Medium birds are cockatiels, conures, lories, parrotlets, and quakers.
- Large birds are African greys, amazons, caiques, cockatoos, and macaws.
- Extra-large birds are Moluccan cockatoos and Hyacinth, Gold, and Scarlet macaws.
-
Calculate the aviary’s volume based on the size and number of your birds. The minimum size of your cage is determined by the size of your bird. All of the dimensions below assume that just 1 bird is in the aviary. As a rule of thumb, multiply the recommended volume for your bird size by 1.5 for every additional bird. [2] X Research source
- Small birds: Width: 20 inches (51 cm); Depth: 24 inches (61 cm); Height: 24 inches (61 cm); Volume: 11,520 inches (29,300 cm).
- Medium birds: Width: 25 inches (64 cm); Depth: 32 inches (81 cm); Height: 35 inches (89 cm); Volume: 28,000 inches (71,000 cm).
- Large birds: Width: 35 inches (89 cm): Depth: 40 inches (100 cm): Height: 50 inches (130 cm); Volume: 70,000 inches (180,000 cm).
- Extra-large birds: Width: 40 inches (100 cm): Depth: 50 inches (130 cm): Height: 60 inches (150 cm); Volume: 120,000 inches (300,000 cm).
Advertisement -
Determine the appropriate wire mesh spacing and gauge. The type of wire mesh that goes over your aviary will depend on your birds' size. Always use stainless steel wire mesh and avoid galvanized wires. Galvanizing is commonly used when coating iron or steel with zinc. [3] X Research source
- Small birds need 1 ⁄ 2 inch (1.3 cm) spacing and 0.0787 inch (2.00 mm) diameter wiring.
- Medium birds need 5 ⁄ 8 to 3 ⁄ 4 inch (1.6 to 1.9 cm) spacing and 0.100 inch (2.5 mm) diameter wiring.
- Large birds need 3 ⁄ 4 to 1 ⁄ 2 inch (1.9 to 1.3 cm) spacing and 0.137 inch (3.5 mm) diameter wiring.
- Extra-large birds need 1 to 1.25 inch (2.5 to 3.2 cm) spacing and 0.196 inch (0.50 cm) diameter wiring.
-
Plan your frame design using a paper and pencil. To keep things as simple as possible, create your aviary from rectangular frame pieces of identical sizes and connect them together. For example, if you're building an aviary for a small bird, each frame piece is 24 inches (61 cm) in height and 20 inches (51 cm) in width. Since they require a depth of 24 inches (61 cm), connect the front and back frame piece on each side by 2 additional frame pieces, which makes 6 in total for the entire frame. [4] X Research source
- Use the same plan formula for all aviary sizes. However, if you have a blueprint of your own, feel free to use it—there are many other complex options. Just remember they will likely be difficult if it's your first time building one.
-
Purchase the necessary materials from a home hardware store. In terms of the frame pieces, use four 2 by 2 inch (5.1 cm × 5.1 cm) pieces of an acceptable wood for each one. The exact length will depend on the dimensions of your aviary but always buy a bit extra in case. For screws, you need 8 exterior grade 4 inch (10 cm) screws for each frame piece. [5] X Research source
- Consider an aviary for small birds that uses 6 frame pieces 24 inches (61 cm) in height and 20 inches (51 cm). Since each frame piece is 4 pieces of wood, you need 24 pieces of wood (6 x 4) in total—twelve 24 inch (61 cm) pieces and twelve 20 inch (51 cm) pieces.
- If you don't want to cut your wood to size yourself, provide your aviary dimensions to a staff member at the home hardware store to help you.
- For wood, use maple, pine, almond, bamboo, or eucalyptus. Avoid anything poisonous to birds, such as juniper, yew, and redwood.
Advertisement
-
Cut your 2 by 2 inch (5.1 cm × 5.1 cm) wood pieces to the necessary size. If you didn't have a professional cut your wood, use a circular saw to cut them to size. Mark of the end to be cut with a pencil and ruler. Afterward, pull the trigger on the rear handle of the saw and use your dominant hand to guide it across your wood while holding it firmly with your non-dominant hand. [6] X Research source
- Always apply downward pressure to the wood with your non-dominant hand to keep the wood steady.
-
Lay down your wood pieces into the rectangular shape of each frame. Find a flat, open surface—such as a garage floor—and lay down 4 pieces of 2 by 2 inch (5.1 cm × 5.1 cm) wood into their frame shapes. Make sure the width pieces connect the length pieces vertically rather than horizontally. Now is the time to take note of any imperfections (such as a piece that's too long) and adjust them. Be sure you have enough frame pieces for your aviary plan and make sure each pair of height and width pieces are parallel to each other. [7] X Research source
- For a frame piece with a width of 20 inches (51 cm) and a height of 24 inches (61 cm), start by laying down the left and right length pieces. Afterward, connect them via the top and bottom width pieces.
- Don't attach your wood pieces before laying them into their frame positions first.
-
Attach each wood piece together into frames using plumber's tape and nails. Use a pair of tin snips to cut four 2 inch (5.1 cm) long pieces of plumber's tape for each wood piece of the frame. Align each one horizontally at the top and bottom corners of the length pieces and across to the width pieces. Now, drill two 1 inch (2.5 cm) screws through piece of tape each to fasten them into place to create an assembled frame piece. [8] X Research source
- Make sure 1 inch (2.5 cm) of each piece of plumber's tape is attached to each piece of wood.
- You can swap plumber's tape with corner connectors and drill them in using screws. However, this is more expensive and time-consuming.
Advertisement
-
Align your assembled frame pieces flat on the floor beside each other. If you're building an aviary for small birds, you have 6 frame pieces 24 inches (61 cm) in height and 20 inches (51 cm) in width. Lay them onto a flat surface horizontally next to each other to prepare for attachment. [9] X Research source
- Make sure the height and width of each assembled frame piece are straight and parallel to the height and width of the other frames pieces.
-
Connect each assembled frame piece using eight 4 inch (10 cm) screws. After attaching the assembled frame pieces using plumber's tape, connect them to each other using 4 screws applied left and right from the corners of the top length pieces—2 on each side parallel to the plumber's tape—and the same amount through the bottom corners of the length pieces. Keep each pair 0.5 inch (1.3 cm) apart from the other, and the screw closest to the perimeter the same length from it. [10] X Research source
- Double-check the alignment of your frame and adjust it as necessary before drilling in the screws. For example, if the top-right corner of a frame piece is a bit crooked, remove the plumber's tape, realign it, and fasten it again.
-
Cut your wire mesh to size using tin snips. Make sure that each side of the aviary except the bottom has a corresponding wire piece. For example, an aviary for small birds made from 6 frame pieces will need six pieces of mesh at least 24 by 20 inches (61 cm × 51 cm) in size. [11] X Research source
- Leave 2 to 3 inches (5.1 to 7.6 cm) of extra wire mesh in case you make a mistake.
-
Attach the wire mesh using a staple gun. Use a staple gun along the entire perimeter of each rectangular frame piece. Space each staple out by about 2 to 3 inches (5.1 to 7.6 cm). [12] X Research source
- If you make a mistake, remove the staple with a flathead screwdriver or office-style staple remover.
-
Cut an opening into the front side of the cage's wire mesh for a door. Use your wire cutters to cut a door opening large enough to fit through—about 84 inches (210 cm) should do. Now, measure the opening and cut a piece of wire mesh slightly larger. [13] X Research source
- Remember that you're going to be entering the cage to clean, so always give yourself more room rather than less.
-
Attach the door to the cage using electrical ties or cage clips. Hold the door over the opening in the wire mesh, taking care to make sure the extra mesh is equal on all sides of the door. Now, wrap electrical ties or cage clips around the perimeter of the door and use them to fasten it to the cage. [14] X Research source
- Fasten the ties or clips tight enough that there are no openings between the door and cage that your birds can escape from.
-
Create a floor for outdoor aviaries. Although you can create a concrete base for your aviary, this requires much more work and is only recommended for larger outdoor aviaries that require a strong foundation. For standard outdoor aviaries, attach a wire mesh to the bottom using a staple gun. Afterward, place gravel or sand on top of it. [15] X Research source
- Don't skip the floor for outdoor aviaries, especially if there are predators in your area.
Advertisement
Video
Community Q&A
Search
-
QuestionWill the small wire on an aviary keep snakes out?Community AnswerNo. Get some plastic and add it to about a quarter of the cage bottom.
-
QuestionWhere can I buy aviary wire mesh?Community AnswerLots of places, depending on where you live. Hardware stores and farm supply stores should have it, and some pet stores carry it as well.
-
QuestionIs an aviary safe for cockatiels?Community AnswerYes. They like having lots of space to fly around in.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You'll Need
- 2 by 2 inch (5.1 cm × 5.1 cm) wood pieces
- Circular saw (optional)
- Plumber's tape
- 1 inch (2.5 cm) screws (exterior grade)
- 4 inch (10 cm) screws (exterior grade)
- Staple gun
- Wire snips
- Wire mesh
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Check local housing association codes and local laws for outdoor aviaries.Thanks
Advertisement
References
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.familyhandyman.com/tools/circular-saws/circular-saw-tips-and-techniques/view-all/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
- ↑ https://www.herebird.com/how-to-build-an-aviary/
About This Article
Article Summary
X
To build an aviary, start by laying 12 inches (30.5 cm) of concrete for the foundation. Use metal or plastic piping to build the frame, which should be at least twice the length of your bird’s wingspan in width and 6 times in height. Finally, construct the walls and roof with 10-gauge welded wire. Make sure to include a door and a protective roof if your aviary is going outdoors. For tips on using perches and decorations to make the aviary fun for your bird, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 348,636 times.
Reader Success Stories
- "Hi, and thanks for the info. I live in Norway and want to build an outside bird cage for my canaries, not too big and not too small. I was considering the insulation as it gets kind of cold in the winter." ..." more
Advertisement
87%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Hi, and thanks for the info. I live in Norway and want to build an outside bird cage for my canaries, not too big and not too small. I was considering the insulation as it gets kind of cold in the winter."
..."
more
"I did not know some wood is better than others. Some can be toxic to birds and my bird chews anything he can. Thank you."
..."
more
"The answers to all the questions people asked and bringing up things like snakes as predators."
"I am starting an aviary, wikiHow was all I needed to start one. Thanks."
"I liked all the tips on different things to add to your bird cage!"
