How to Calculate Carpet on Stairs

PDF download Download Article
PDF download Download Article

If you're installing or renovating a staircase, you'll most likely need to figure out the amount of new carpeting you'll need to cover the stairs. The basic steps you'll take to measure your stairs for carpeting are straightforward. Measure the width, height, and depth of the stairs and use these measurements to calculate the area. Then, multiply the step area by the total number of stairs in the staircase.

Part 1
Part 1 of 2:

Making Your Measurements

PDF download Download Article
  1. The tread of a stair is the horizontal part of the stair on which you step. With a tape measure , measure from 1 side of the stair tread to the other side. Round your measurement to the nearest foot (or to the next 30 cm, if you prefer metric measurements), and record the width measurement. [1]
    • Unless you have abnormally wide or narrow stairs, they’ll measure close to 3 feet (0.91 m).
    • If you plan to only install a carpet runner down the center of your stairway, measure the width of the area that you plan to cover. [2]
  2. When carpeting professionals install the carpet, they’ll bend about 1 inch (2.5 cm) of it over on either end so that the rough-cut carpet edges aren’t visible. Without these extra 2 inches (5.1 cm) added to the measurement, you’ll find yourself short on carpet. [3]
    • So, if the stair width is exactly 36 inches (91 cm), with the added inches, the stair now measures 38 inches (97 cm).
    Advertisement
  3. Set your tape measure at the back edge of the tread, and measure the tread from front to back. Then bend the tape measure down at a 90° angle and continue measuring in the same direction down the riser. (The riser of a stair is the vertical board that elevates each tread above the previous.) Calculate the distance from the back of the tread to the base of the stair’s riser. [4]
    • If the tread overhangs the riser, measure back to the riser itself under the overhang and then down to the bottom. You’ll use the total measurement to calculate the height of each stair.
    • Risers are typically around 6–7 inches (15–18 cm) high.
  4. Round up the measurements that you’ve taken so far—the width of each tread and the combined length of a tread and riser—up to the nearest foot (or to the next 30 cm, if you prefer metric measurements). Then write both measurements down so you don’t forget them. For example, say that each stair which has a width of 45 in (110 cm) and a height of 18 in (46 cm). In this case, you’d round up and write: “4 ft (1.2 m) by 2 ft (0.61 m).” [5]
    • Rounding the measurements up will ensure that you have a little extra carpeting to cover the steps in case any gets thrown away.
  5. Measuring the carpet for landings is straightforward: use a tape measure to calculate the length and width of the landing. While you’re measuring the width of the landing, bend the tape measure and measure the height of the riser directly beneath it. As an example, a common landing size would measure something like 4 by 5 feet (1.2 m × 1.5 m). [6]
    • As you did for the step measurements, round the landing measurements up to the nearest foot (or to the next 30 cm, if you prefer metric measurements).
    6. Advertisement
Part 2
Part 2 of 2:

Calculating the Area

PDF download Download Article
  1. Multiplying the rounded length and width measurements will yield the square footage of a step. The square footage—also called the area—of a step will give you the number of square feet (or meters) that you’ll need to cover with carpet. [7] So, the calculated area of 1 of the stairs in our example would be: 8 square feet (0.74 m 2 ).
    • If you plan to install carpet padding beneath the carpet on the stairs, add 3 inches (7.6 cm) to the total area of the stair before rounding.
  2. Count the total number of stairs and record that number. Multiply the square footage of 1 step—the number you just calculated—by the total number of steps. This is the total area, or square footage, for the stairs you plan to carpet. Say that you’ll be carpeting 12 stairs. In our example, you’d need a total of 96 square feet (8.9 m 2 ) of carpeting to cover your stairs. [8]
    • Keep in mind that the stairs may not all be in 1 row. For example, many homes have 6 stairs, then a small landing, then 6 more stairs.
  3. Find the landing measurements that you calculated earlier. Multiply the landing’s length times its width. This will give you the total area of the landing (and the riser just below it). Add this number to the total area of the stairs to calculate the total surface you’ll need to purchase carpet for. [9]
    • In our example, your landing measures 4 by 5 feet (1.2 m × 1.5 m). Multiply these dimensions to calculate the amount of carpet you’ll need to cover the landing: 20 feet (6.1 m).
  4. An online calculator can run the math equations for you, which may prove useful if you’re not confident in your math skills. Simply input the width and height of the number of stairs you’ll be carpeting. Hit the “calculate” key, and the calculator will give you the total area measurement.
  5. Mistakes can happen while carpet is being installed, and it’s always better to have too much carpeting than too little. So, add in an extra 10% of the total to make sure that you’ll have enough carpeting to compensate for any errors your or the carpet installers may make. [10]
    • In our example, the total stair surface area came to 96 square feet (8.9 m 2 ). Adding an extra 10% to this estimate gives us a final figure of: 106 square feet (9.8 m 2 ).
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I convert square inches to square feet?
    Community Answer
    A square foot is the area of a square one foot (12 inches) on a side, so there are 144 square inches in a square foot. So divide the number of square inches by 144 to get square feet. Or if you're lazy, just type something like "5000 square inches in square feet" into a Google search, and Google won't just tell you the answer, it will bring up a conversion calculator!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 12
  • Question
    How do I get 5 feet from 1887 inches?
    Community Answer
    You don't. 1887 sq inches should be divided by 144 sq inches (the amount of sq inches in a sq foot), and you should get 13.1 or so sq feet.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 22 Helpful 51
  • Question
    How do I round when putting carpet on stairs?
    Community Answer
    Round up, then just cut off the extra carpet.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You'll Need

      • Tape measure
      • Pen
      • Paper
      • Online carpet calculator

      Tips

      • Before purchasing your carpet, consult with a specialist to allow for the nap of the carpeting and any seams that may be necessary.
        Thanks
        Helpful 0 Not Helpful 3
      • If your stairs are not all the same size, multiply width by height to determine the area of each stair separately. Add the measurements together to calculate the total area and amount of carpeting you will need.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Figure Out the Dimensions of a Staircase
      How to
      Install Carpet
      6 Creative Ways to Display a Rug on Your Wall
      How to
      Seam Carpet
      How to
      Cut Carpet
      How to
      Prevent Carpet Dents
      How to
      Remove Furniture Dents from Carpet
      How to
      Move Furniture on Carpet
      How to
      Install Carpet on Concrete (Basement)
      How to
      Measure a Roll of Carpet
      How to
      Relay Carpet
      How to
      Weave a Rag Rug
      How to
      Make a Carpet Into a Rug
      Easiest Ways to Remove Waves and Ripples from a Rug
      Advertisement

      References

      1. ↑ http://www.abccarpets.com/forms.htm
      2. ↑ https://youtu.be/Zk9UfxlbUnk?t=97
      3. ↑ https://youtu.be/Zk9UfxlbUnk?t=52
      4. ↑ http://www.carpet-index.com/diy/MeasuringImperial/MeasuringHSLI.htm
      5. ↑ http://www.carpet-index.com/diy/MeasuringImperial/MeasuringHSLI.htm
      6. ↑ https://youtu.be/Zk9UfxlbUnk?t=26
      7. ↑ https://www.improvenet.com/r/carpet-calculator
      8. ↑ https://www.improvenet.com/r/carpet-calculator
      9. ↑ http://www.abccarpets.com/forms.htm
      1. ↑ http://www.abccarpets.com/forms.htm

      About This Article

      Article Summary X

      To calculate how much carpet you'll need for your stairs, start by measuring the width of 1 tread with a tape measure and add 2 inches to make sure you have enough carpet. Next, measure upward across the tread and riser of 1 stair. After measuring the riser, get the length and width of any landings, then round all of your measurements up to the nearest foot. Once you have these numbers, multiply the tread and riser measurements together to get the square footage of 1 step, then multiply your result by the number of steps. Likewise, multiply the length and width of the landing to get its area. Finally, add the area of the landing with the area of all the steps to find out how much carpet you need. For more tips, like how to know how much extra carpeting to get, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 458,611 times.

      Reader Success Stories

      • Barbara Consbruck

        May 11, 2019

        "I needed to figure out how to measure stairs for carpet so I can figure out how much it is going to cost. This is ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement