Download Article
Download Article
Square meters are a measurement of area , usually used to measure a two-dimensional space such as a field or floor. [1] X Research source For example, you might measure the footprint of a couch in square meters , then measure your living room in square meters to see if it will fit. If you only have a ruler or measuring tape that uses feet or another non-metric unit, you can still use it to calculate the area, then convert to square meters.
Steps
-
Choose a meter stick or metric tape measure. Select a meter stick ruler or tape measure with meters (m) or centimeters (cm) printed on it. These tools will make it easier to calculate square meters, since they were designed in the same system of measurement.
- If you can only find a ruler with feet (ft) or inches (in), measure with those instead, then go to the section on converting to square meters.
-
Measure the length of the area you're measuring. Square meters are a unit for measuring area, or the size of a two-dimensional object such as a floor or a field. Use your measuring tool to measure one side of the object, from one corner to the other. [2] X Research source Write down the result.
- If the object is longer than 1 meter, remember to include both the meter and centimeter parts of the measurement. For instance, "2 meters 35 centimeters."
- If you want to measure an object that isn't rectangular or square , read the Complex Shapes section instead.
Advertisement -
If you can't measure the entire length at once, do it in stages. Lay out the measuring tool, then put down a rock or other small object exactly at an easy to remember mark (like 1 meter or 25 centimeters). Pick up the tool and lay it down again, starting at the small object. Repeat until the entire length is covered, and add all your measurements together.
- If the room isn't rectangular, break it into a number of small rectangles, then measure those. For example, if the room is L-shaped, break that up into two non-overlapping rectangles. [3]
X
Expert Source
Mario Banuelos, PhD
Associate Professor of Mathematics Expert Interview. 11 December 2021.
- If the room isn't rectangular, break it into a number of small rectangles, then measure those. For example, if the room is L-shaped, break that up into two non-overlapping rectangles. [3]
X
Expert Source
Mario Banuelos, PhD
-
Measure the width . Use the same tool to measure the width of the same area or object. The side you measure in this step should be angled close to 90º away from the length of the object you measured earlier, like two sides of a square next to each other. [4] X Research source Write this number down as well.
- Unless the object you're measuring is much smaller than 1 meter, you can round to the nearest centimeter when making your measurements. For instance, if the width is slightly past the 1 meter 8 centimeter mark, just use '"1m 8cm" as your measurement, without using decimals or millimeter measurements.
-
Convert from centimeters to meters. Usually, the measurements won't divide evenly into meters. Instead, you'll have a measurement in both meters and centimeters, for example "2 meters 35 centimeters." Because 1 centimeter = 0.01 meters, you can convert a centimeter measurement into meters by moving the decimal point two digits to the left. Here are a couple examples: [5] X Research source
- 35cm = 0.35m, so 2m 35cm = 2m + 0.35m = 2.35m
- 8cm = 0.08m, so 1m 8cm = 1.08m
-
Multiply the length and width together. Once both measurements are converted into meters, multiply them together to get the measurement of the area in square meters. [6] X Expert Source Mario Banuelos, PhD
Associate Professor of Mathematics Expert Interview. 11 December 2021. Use a calculator if necessary. For example:- 2.35m x 1.08m = 2.538 square meters (m 2 ).
-
Round to a more convenient measurement. If you get a long decimal as an answer, for instance 2.538 square meters, you'll probably want to round it to a number with fewer digits, for instance 2.54 square meters . In fact, since you probably didn't measure correctly down to the tiniest fraction of a meter, the last digits probably aren't accurate anyway. In most cases, you can round to the nearest centimeter (0.01m). For a more accurate measurement, learn how to round to the significant digits .
- Whenever you multiply two numbers with the same units (for instance, meters), the answer is always in the form of that unit squared (m 2 , or square meters).
Advertisement
-
Multiply square feet by 0.093 . Measure the length and width in feet and multiply them together to get a result in square feet. Since 1 square foot = 0.093 square meters, multiply your result by 0.093 to get the answer in square meters instead. [7] X Research source Square meters are bigger than square feet, so it will take fewer of them to cover the same area.
- For greater precision, multiply by 0.092903 instead.
-
Multiply acres by 4050. One acre contains about 4050 square meters. If you want to be more precise, multiply by 4046.9 instead. [9] X Research source
-
Convert square miles to square kilometers instead. One square mile is much, much larger than a square meter, so typically it is converted into square kilometers instead. Multiply the square miles by 2.6 to find the area in square kilometers instead. (Or multiply by 2.59 instead to be more precise.) [10] X Research source
- If you really want to convert to square meters, 1 square kilometer = 1,000,000 square meters.
-
Convert square meters to units of area, not length. Square meters are a unit that measures area , or two-dimensional surfaces. It doesn't make any sense to compare them with units that measure length , or distance in one direction. You can convert between "square meters" and "square feet," but not between "square meters" and "feet."
- Don't use the calculations in this section to convert between units of length. That requires different numbers.
Advertisement
-
Break the shape up into pieces. If you are solving a math problem , draw or cut lines in the shape to divide it into simpler shapes, such as rectangles and triangles . If you are measuring a room or other physical object, sketch a diagram of the area first, then do the same thing. Take measurements of each section and write them on the diagram. [11] X Research source Follow the instructions below to find the area of each section, then add the results together.
-
Measure rectangle shaped pieces as you would normally. To find the area in square meters for rectangular sections, see the instructions for calculating an area in square meters.
- If you are measuring in a different unit, look at the section on other units.
-
Measure right triangles similarly, then divide by two. A right triangle, which has a 90º angle just like the corners of a square, has an area easy to calculate. Measure the two sides next to that 90º corner (the length and width), multiply them together, then divide by two to get the answer in square meters. [12] X Research source
- This works because a right triangle is exactly the size of a rectangle cut in half. Basically, you found the area of a rectangle as usual, then divided by two to get the area of the triangle.
-
Turn other triangles into right triangles, then measure them. Draw a line from any corner of a triangle to the opposite side, so that the line hits the opposite side at a 90º angle (picture the corner of a square). You've just divided the triangle into two pieces, each one a right triangle! See above for instructions on how to find the area of a right triangle; measure each of the two sub-triangles separately, and add them together.
-
Calculate the area of a circle. The area of a circle is πr 2 , where r is the radius, or distance from the center of the circle to the rim, or perimeter. [13] X Research source Measure this distance, multiply it by itself, then multiply the result by π on a calculator. If you don't have a calculator with a π function, use 3.14 instead (or 3.1416 if high precision is required).
- If you're not sure where the center is, have a friend hold a tape measure and walk around the edge of the circle. Hold the other end of the tape measure and adjust your position until the measurement stays the same while your friend walks around the entire edge.
- More complicated curved boundaries require more advanced math to calculate. If you are measuring a room for practical purposes, it might be easier to estimate the area by pretending the curved surfaces are a series of straight lines.
Advertisement
Expert Q&A
Search
-
QuestionHow do you find the area of an L-shaped room?Mario Banuelos is an Associate Professor of Mathematics at California State University, Fresno. With over eight years of teaching experience, Mario specializes in mathematical biology, optimization, statistical models for genome evolution, and data science. Mario holds a BA in Mathematics from California State University, Fresno, and a Ph.D. in Applied Mathematics from the University of California, Merced. Mario has taught at both the high school and collegiate levels.Break it into two non-overlapping rectangles and measure the length and width of both. Multiply the length and width of each rectangle, then add them together.
-
QuestionHow many meters is a square meter?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA meter is a measurement of length. A square meter is a measurement of area. One square meter is the equivalent of the area of a square that is one meter in length on each side. The perimeter of such a square (the total distance around it) would be four meters. A square meter could also be the area of some other figure such as a rectangle, triangle or circle if it contains the same amount of space as the square just mentioned.
-
QuestionHow do I figure out the area of a room in square meters?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerIf the room is rectangular, measure the length and width of the room in meters, then multiply those dimensions together. If the room is not a perfect rectangle (e.g., if it has an alcove), you’ll need to divide up the room into rectangular (or triangular) portions. Find the area of the main part of the room and add it to the area of the alcove or extension.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Say "five square meters" instead of "five meters squared." These are technically both correct, but the second one is often misinterpreted to mean the area of a square five meters long and five meters wide (which actually has an area of 25 square meters, or 5 x 5). [14] X Research sourceThanks
- If you're not sure whether you calculated correctly, check that your answer is in the right ballpark with these measurements:
- An American football field is about 5,400 square meters.
- An association football (soccer) field ranges from 4,000 to 11,000 square meters.
- A king-size mattress is about 5 square meters. [15] X Research source
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Ruler or tape measure
- Calculator
References
- ↑ https://www.mathsisfun.com/definitions/square-meter.html
- ↑ https://sciencing.com/calculate-square-meters-room-7776820.html
- ↑ Mario Banuelos, PhD. Associate Professor of Mathematics. Expert Interview. 11 December 2021.
- ↑ https://sciencing.com/calculate-square-meters-room-7776820.html
- ↑ https://www.youtube.com/watch?v=6bQ6HJsAv4A
- ↑ Mario Banuelos, PhD. Associate Professor of Mathematics. Expert Interview. 11 December 2021.
- ↑ https://www.metric-conversions.org/area/square-feet-to-square-meters.htm
- ↑ https://www.metric-conversions.org/area/square-yards-to-square-meters.htm
- ↑ https://www.metric-conversions.org/area/acres-to-square-meters.htm
- ↑ https://www.metric-conversions.org/area/square-miles-to-square-kilometers.htm
- ↑ https://sciencing.com/calculate-square-meters-room-7776820.html
- ↑ https://www.khanacademy.org/math/basic-geo/basic-geo-area-and-perimeter/area-triangle/v/example-finding-area-of-triangle
- ↑ https://www.mathsisfun.com/geometry/circle-area.html
- ↑ http://mathforum.org/library/drmath/view/57209.html
- ↑ http://www.bluebulbprojects.com/MeasureOfThings/results.php?comp=area&unit=m2&amt=5&p=1&sort=pr
About This Article
Article Summary
X
To calculate square meters, first measure the length of the area you’re measuring. Then, measure the width. Convert any centimeters in your measurement to meters. For example, if the length you measured is 2 meters and 35 centimeters, you would convert the 35 centimeters to meters by moving the decimal point two digits to the left, which would give you 0.35 meters. Therefore, the length is 2.35 meters. Finally, multiply the length and width to get the number of square meters. For example, if the length is 2.35 meters and the width is 2 meters, you would multiply 2.35 by 2 and get 4.7. Therefore, the area you’re measuring is 4.7 square meters. If you’re measuring in feet instead of meters, first convert any inches in your measurements to feet by dividing the number of inches by 12. For example, if the width of the area you're measuring is 10 feet and 5 inches, you would divide 5 by 12 and get 0.42. Therefore, the width is 10.42 feet. Multiply the length by the width to get the number of square feet, then multiply the number of square feet by 0.093 to find the number of square meters. For example, if the area you’re measuring is 2 square feet, you would multiply 2 by 0.093 and get 0.186. Therefore, the area is 0.186 square meters. To learn how to calculate square meters for areas that aren't square or rectangular, read the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 4,350,193 times.
Reader Success Stories
- "For those people who are not mathematically inclined, I think this is great! Explanations are in the simplest of terms and the drawings give a added visual aide! I've got this website on my favorites bar now!" ..." more
Advertisement
"For those people who are not mathematically inclined, I think this is great! Explanations are in the simplest of terms and the drawings give a added visual aide! I've got this website on my favorites bar now!"
..."
more
"I simply couldn't remember how to calculate the area of my floor. This article was very helpful (sent me back to my school days!) Thank you."
..."
more
"Thanks so much guys for sharing such valuable knowledge in such a simplified way for understanding, I've relied on wikiHow so many times!"
..."
more
"I did not know how to calculate the square meters, but in just a few seconds I've learned everything, all thanks to the great team. Wow!"
..."
more
"Am really happy for your help to have an extra technique to calculate square meters. Thanks."
