PDF download Download Article
Use household items to get a sparkling clean toilet
PDF download Download Article

If general cleaners aren’t getting that ring out of your toilet bowl, don’t worry. Some of the best ways to clean stained toilet bowls require only a few household items and a little bit of elbow grease. You probably already have everything you need: baking soda, vinegar, lemon juice, hydrogen peroxide, and paper towels! We’ve compiled the easiest ways to remove all types of stains from a toilet, from black spots to pink rings. Follow along with this article to learn a new cleaning routine!

Things You Should Know

  • Clean your toilet with a hard-bristled toilet brush and toilet bowl cleaner , turn off the water, flush your toilet, and then use a wet vac or a cup to fully remove the rest of the water.
  • Clean mineral stains (pink, red, brown, or white rings/deposits in your toilet) by letting 3 cups (710 mL) of an acidic cleanser , like vinegar, sit in your toilet overnight.
  • Clean mold stains (black, blue, green, yellow, or white fuzzy dots) and mildew (white, yellow, and brown streaks) by spraying them with diluted bleach, and then scrubbing them off.
Part 1
Part 1 of 3:

Doing an Initial Cleaning

PDF download Download Article
  1. Usually, toilet stains are caused by minerals, mold, or mildew. Different stains require different products to effectively get rid of them. [1] To find out which method to follow, determine what’s causing your stains.
    • Mineral stains (caused by hard water) appear as rings and build up in the inner toilet bowl. They may be pink, red, brown, or white. Use an acidic cleanser for mineral build-up.
    • Mold stains can occur anywhere on your toilet. Mold is slightly fuzzy and can be blue, green, yellow, gray, black, or white. Use a bleach-based cleaner for mold.
    • Mildew can also grow anywhere on your toilet, but it’s most commonly found near the top of the toilet bowl or on the toilet tank. Mildew usually starts out white, but may turn yellow or brown in time. Use bleach products for these stains, too.
  2. Clean your toilet by squeezing a toilet bowl cleaner all around the underside of the time and letting it sit for 10 minutes. Then, use a hard-bristled toilet brush to work the cleaner into all the nooks and crannies. This starts loosening the stains and build up.
    • Use bleach for mold and mildew and acidic cleaners for mineral stains. Always wear gloves and eye protection while working with highly acidic products.
      • Never mix cleaners. Vinegar and bleach (and ammonia and bleach), for example, make poisonous gas when combined.
    • Before you begin cleaning your toilet, check your manufacturer's instructions. Certain products can damage the inner workings of your toilet—such as the flapper—while others may cause discoloration.
    Advertisement
  3. Having extra water in the toilet bowl dilutes the cleaning products, so turn off the water (with the valve behind your toilet) and flush it to empty the bowl. You may need to use a cup, towel, or wet vacuum to get up the last of the water. [2]
    • Open the door and any windows in the bathroom before you start. When the toilet is dry the drain opens directly to the sewage pipe—it can get pretty smelly.
      • Consider wearing a mask, especially if the room isn’t well ventilated.
  4. Advertisement
Part 2
Part 2 of 3:

Cleaning Hard Water Stains

PDF download Download Article
  1. To break up mineral deposits (which are basic), pour white vinegar up to the normal waterline (roughly 3  c (710 mL)) and let it sit overnight. [3] Give the whole thing a good scrub with a stiff-bristled toilet brush in the morning. [4]
    • You can also use lemon juice—it’s only slightly less acidic than vinegar.
    • To get things even more concentrated, soak some paper towels in vinegar and stick them directly on the stains.
    • You may have heard that bleach is good for hard water and limescale, but bleach is basic (high pH) and not effective for dissolving minerals. In fact, if you use bleach on rust (red and brown) stains, they can become even worse. [5]
  2. Soak paper towels in vinegar and stick them to the stains for 4 hours. Mix baking soda and water until it forms a thick paste. Take off the paper towels, rub the paste into the stained areas with a cloth, then wait 5-10 minutes. Spray the bowl down with vinegar to rinse it off. [6]
    • Use at least 8 oz (230 g) of baking soda for the paste, and make the consistency very thick, so it can stick to the stains.
      • Use a few drops of water at a time while making the paste.
    • Flush your toilet three times (and remove the water again) between switching cleaning products.
  3. Hydrogen peroxide is an all-around great disinfectant, and it can tackle hard water stains, too! Pour ½ cup (118 ml) of hydrogen peroxide into the bowl, then let it sit for half an hour. [7] Scrub the stains with a toilet brush.
    • If the stains are higher than the water line, put hydrogen peroxide into a spray bottle and spritz it directly onto them or soak paper towels in hydrogen peroxide and stick them to the area.
  4. Muriatic acid , or brick acid, is incredibly acidic (pH 2) and can take a serious bite out of hard water stains. Pour about 3  c (710 mL) of brick acid up to where the water usually settles, then let it sit for an hour. [8] Scrub the stains with a toilet brush.
    • Stick paper towels soaked in the acid directly onto stains that are higher than the water line.
    • If you get any brick acid on your skin, run cold water over the area for ten minutes. [9]
  5. If nothing else works, try using a pumice stone toilet bowl cleaner (or just a pumice stone, if you happen to have one lying around). Soak the stone in warm water for 20 minutes, then use very light pressure to scrub away stains. [10]
    • Pumice is very soft, but it’s still a rock. While this method is great at getting rid of stains, too much pressure can scratch your toilet bowl.
  6. Advertisement
Part 3
Part 3 of 3:

Combating Mold and Mildew Stains

PDF download Download Article
  1. To kill the organisms making these stains, spray the areas or pour 3  c (710 ml) of white vinegar directly into the bowl, then scrub with a toilet brush. White vinegar is acidic enough to effectively kill mold and mildew and prevent it from coming back. [11]
    • Another natural product you can try is tea tree oil, which is believed to be a fungicide. [12] Add 10 drops of tea tree essential oil to your toilet bowl or spray a tea tree oil solution (5-10 drops of oil to a bottle of water) directly onto any mildew or moldy spots.
    • Flush the toilet at least three times between cleaning methods so nothing mixes together or gets stuck in the internal mechanisms of the toilet.
  2. Put hydrogen peroxide into a spray bottle and cover the mold or mildew. Get the liquid up under the rim if you’re seeing mildew stains—that’s an area it likes to grow in. Let it sit for at least 10 minutes, then scrub it off. [13]
  3. If the stains persist, move on to bleach. Dilute the bleach to a ratio of 1:32 (bleach to water) and spray it onto the stains, or add 3  c (710 ml) to the toilet bowl. Use a toilet brush to scrub the bleach into the stains.
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I put blue toilet cleaner in my toilets before a 6 week trip. I forgot to finish the cleaning. I now have blue stains in my toilets. I have tried many cleaners. Any Ideas?
    Community Answer
    Use a pumice stone made for removing stains from a toilet. Make sure to read directions before use. It will take some time, but it should work.
  • Question
    My toilet seems to accumulate stains below the water-line. Sometimes there are what looks like black mould strings. Sometimes the waterline is brownish. This happens even when I clean it with a bleach.
    Katelyn Grosso
    Community Answer
    If the stain is happening at the waterline, it may be limescale. This can be removed by scrubbing the stain with a pumice stone.
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Hard Water Stains

      Mildew and Mold Stains

      About This Article

      Thanks to all authors for creating a page that has been read 226,988 times.

      Reader Success Stories

      • Rick C.

        Mar 28, 2019

        "Vinegar and baking soda made my toilet sparkling clean! Thank you."
      Share your story

      Did this article help you?

      Advertisement