Download Article
Download Article
A lot of people love Converse sneakers, and for good reasons. They are comfortable to wear, and they go with just about anything. Best of all, they are easily customizable and a blank canvas for any artist. The fabric parts can be colored with markers, paints, or fabric dyes. The rubber parts can be colored with markers.
Steps
-
Start with a clean shoe. The best Converse to work on are brand new. If you can't get new ones, you will need to clean the ones you already own. This will help the ink stick and show up better. Wipe down the rubber parts with a cotton ball soaked in rubbing alcohol. Wipe down the fabric parts with a damp towel. Let the shoe dry before moving on.
- Most markers are translucent, and will show up best against a white shoe. If you are going to buy a new pair of Converse, try to get white ones.
- If you are going to color the entire shoe, remove the shoe laces. You can even color those ones as well.
-
Get some permanent markers or fabric markers. Permanent markers will work on all parts of the shoe. Because they are translucent, they will show up best against white Converse. Fabric markers will only work on the fabric part of the shoe. They may smear if you use them on the rubber part.
- Make sure you get the right type of fabric marker. If your shoe is colored, get a fabric marker intended for dark or colored fabric. If your shoe is white, you can use any type of fabric marker.
Advertisement -
Come up with a design, and practice it on a sheet of paper or scrap of fabric. Once you start coloring your shoe, it will be difficult to erase any mistakes. Sketch out your design on a sheet of paper or scrap of fabric, then color it in using the markers. Try simple designs, such as lightning bolts, hearts, and stars. You can also try geometric designs as well.
- If you are going to color the rubber parts, practice on a sheet of paper.
- If you are going to color the fabric parts, try to practice on a scrap of canvas, linen, or cotton fabric. The texture will give you a feel for what it is like to color on Converse.
-
Sketch your design on the shoe using a pencil. If your shoes are white, try to sketch lightly so that the pencil doesn't show through. If your shoes are dark, use a white colored pencil instead. -
Color in your design, starting with the lightest colors first and finishing with the darkest. Depending on the type of marker you are using, you may need to wait for the ink to dry before moving onto the next color. Don't start with the darker colors. If you do, the ink will smudge and bleed into the lighter colors and make them muddy.
- If you are using fabric markers meant for colored fabrics, shake it first, then tap the tip on a flat surface. This will help get the ink into the felt tip. The ink will gush out, so don't do the tapping part on your Converse.
-
Wait until the ink dries before adding the outlines, if desired. The outlines are not necessary, but they can help make your work stand out some more. Try to use thicker lines on the main/larger shapes, and thinner lines on the smaller shapes and details.
-
Spray the fabric part of the shoe with a shoe sealant or a waterproofing spray. You can also use a spray-on acrylic sealer. Whatever you choose to use, make sure that it is matte, or your shoes will end up shiny. This will help protect your work and make it last longer.
- You do not need to spray the rubber parts, if you colored them. Keep in mind that the designs will wear off of the rubber parts on their own the more you wear your shoes.
-
Wait until the sealer dries before putting the laces back in and wearing your shoes. Keep in mind that even with the sealer, your work will still be delicate. Wear your shoes with care and try to avoid getting them wet or muddy.
-
Finished.
Advertisement
-
Take out the shoe laces and cover the rubber parts with masking tape. This method will only work on the fabric parts of your shoe. Fabric paint and acrylic paint will not stick to rubber for very long. If you'd like to color the rubber parts, you will need to use permanent markers.
- If you are only painting the sides of the shoe, you do not need to remove the shoe laces.
-
Come up with a design, and practice it on a sheet of paper or scrap of fabric. Once you start painting your shoe, it will be difficult to erase any mistakes. Sketch out your design on a sheet of paper or scrap of fabric, then color it in using acrylic or fabric paint and some thin paintbrushes.
- Cotton, linen, or canvas fabric will give you the best feel for what it is like to work on Converse. Paper will do in a pinch, however.
- If your paint is too thick, thin it out with some water.
-
Sketch your design on the shoe using a pencil. Press lightly, so that the pencil doesn't show through once the paint dries. If your shoe is a very dark color, use a white color pencil instead.
- Simpler designs, such as stripes, stars, and hearts will look the best.
- If you like cartoons or comics, consider painting your favorite character.
-
Fill your design in with paint primer if you are using acrylic paint. This will help your colors show up better and make them last longer. Let the paint primer dry before you move on to the next step. [1] X Research source
- If you are using fabric paint, you don't need to use paint primer.
-
Color in your design starting with the largest shapes first. Paint the edges first, then fill the shape in. If you want to add any details, wait until the paint dries. For example, if you want to paint a ladybug, paint the entire bug red first. Add the spots after the red paint dries. Keep in mind that some colors, such as yellow, will need several coats before they show up well.
- If you want the outline to be another color (like black) wait until the very end.
- If you make a mistake, wait for the paint to dry, then paint over it.
-
Wait for the paint to dry before you do the outlines. You can do the outlines using a thin, pointed paintbrush or a black permanent marker.
-
Spray the shoe with a shoe sealant or a waterproofing spray. You can also use an acrylic spray sealer. Whatever you decide to use, make sure that it is matte, or your shoes will be shiny. The sealer will protect your paint work and help it last to longer. [2] X Research source
-
Remove the masking tape once the sealer dries, and put the laces back in. Your shoes are now ready to wear. Keep in mind that even with the sealer, your work will be delicate. Try to avoid wetting your shoes soaked or muddy.
Advertisement
-
Choose a white or cream-colored shoe. Dye is translucent. It adds color to whatever color is already there. For example, if you tried to dye a pair of blue shoes red or pink, you'll end up with purple. You also cannot dye shoes a lighter color. [3] X Research source You can, however, dye any color of shoe black.
-
Remove the shoe laces, and cover the rubber soles and toe with petroleum jelly or masking tape. This will protect the rubber from picking up the dye. [4] X Research source If you want to dye the laces as well, you will still want to take them out; you will dip them into the dye bath along with the shoes. This will help them dye more evenly.
-
Fill a large bucket with hot water, and stir in 1 cup (225 grams) of salt and 1 tablespoon (15 milliliters) of laundry detergent. Make sure that the bucket is deep enough to fit your shoe.
- The salt and laundry detergent will help make the dye brighter. [5] X Research source
-
Prepare your dye, then add it to the bucket. Each company may be a little different, so follow the directions on your bottle or packet. In general, liquid dyes do not need any preparation. If you are using powdered dye, you will need to dissolve it in 2 cups (475 milliliters) of hot water first. [6] X Research source
-
Dunk the shoes into the bucket. If your shoes float to the top, you will need to weigh them down with something heavy. You can use glass jars or bottles, or even sticks. If you don't do this, they will float to the top and your dye job will be uneven.
-
Leave the shoes in the dye bath for 20 minutes. This will give the dye enough time to soak into the fabric.
-
Take the shoes out, and rinse them with water until the water runs clear. Use warm water first to set the dye, and then cold water to get rid of the excess dye. [9] X Research source Be sure to get the inside of the shoes as well.
-
Wait 5 minutes, then rinse the shoes again. This is to get rid of any last traces of dye. Remember to rinse the inside of the shoes as well.
-
Set the shoes down on some newspaper and let them dry overnight. If you can, set them out in a sunny spot. This will help them dry faster. If you don't have any newspaper, you can use an old towel or even a paper bag instead.
-
Remove the tape or petroleum jelly. If any dye leaked onto the shoes, you can remove it using rubbing alcohol or a bleach pen. [10] X Research source You can also try a magic eraser or a paste made from equal parts of baking soda, water, and vinegar. [11] X Research source
- If you are using a bleach pen, leave the bleach on the rubber parts for 10 minutes, then wipe it off with a damp cloth. Be careful not to get any bleach on the fabric part. [12] X Research source
-
Put the shoe laces back in. Your shoes are now ready to wear.
Advertisement
Community Q&A
Search
-
QuestionCan I dye pink Converse to tiffany blue? What color would be best to use?Community AnswerYou would have to first bleach them to remove the pink color, then mix a light blue dye to use.
-
QuestionI want to color the mid-soles with black. Would a Sharpie work, or would paint work better?Community AnswerSharpie is less time consuming and works almost as well as paint. If you have the time to wait for the paint to dry and also have black paint, then painting would be better.
-
QuestionCan I use pink sneakers instead of white?Community AnswerYes, but if you are using dye or markers, you will be putting the color on top of the pink. So if you use blue dye, the shoes will be a shade of purple.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
-
Thanks
- After dyeing your shoes, consider painting or drawing some designs on top of them. Use black permanent or fabric markers for delicate designs, and black acrylic or fabric paint for bold designs.Thanks
- Markers will show up best against white shoes.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you colored the toe caps, know that the designs may fade over time.Thanks
Advertisement
Things You'll Need
Using Markers
- Converse
- Rubbing alcohol (optional)
- Cotton ball (optional)
- Fabric markers or permanent markers
- Masking tape
- Pencil
- Shoe sealer, waterproofing spray, or acrylic sealer
Using Paint
- Converse
- Fabric paint or acrylic paint
- Paintbrushes
- Masking tape
- Pencil
- Shoe sealer, waterproofing spray, or acrylic sealer
Using Dye
- Converse
- Masking tape or petroleum jelly
- Fabric dye
- Salt
- Laundry detergent
- Hot water
- Bucket
- Bleach pen or magic eraser (optional)
Expert Interview
Thanks for reading our article! If you’d like to learn more about coloring shoes, check out our in-depth interview with Victor Adrian .
References
- ↑ https://empressofdirt.net/how-to-paint-shoes/
- ↑ https://empressofdirt.net/how-to-paint-shoes/
- ↑ https://thedreamstress.com/2011/06/tutorial-how-to-dye-fabric-shoes/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://lynnandtonicblog.com/2010/03/05/how-to-dye-your-chuck-taylors/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://lynnandtonicblog.com/2010/03/05/how-to-dye-your-chuck-taylors/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://lynnandtonicblog.com/2010/03/05/how-to-dye-your-chuck-taylors/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://lynnandtonicblog.com/2010/03/05/how-to-dye-your-chuck-taylors/
- ↑ https://livingbetweenthelines.com/how-to-dye-chucks/
- ↑ https://empressofdirt.net/how-to-paint-shoes/
About This Article
Article Summary
X
If you want to add some color to your Converse, make sure to start with brand new white sneakers, as these will make your designs look brighter. Alternatively, you can clean converse you already own with a damp towel. Before you start coloring on your shoes, pick out the permanent markers you want to use and sketch out a design on a piece of paper. When you’ve made a cool design, outline it on your Converse in pencil, then color it in with the markers. As you color, use light colors first and let the ink dry before moving on to darker markers, or they might smudge. After your design has dried, spray the fabric with a matte shoe sealant or water-proofing spray to protect your work. For more tips, like how to paint your Converse, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 222,404 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It worked great."
