PDF download Download Article PDF download Download Article

Acrylonitrile butadiene styrene, or ABS plastic, is a durable yet malleable material used in a variety of products, like computer keys and car interiors. Whether you’re cutting out smaller sections from a larger piece or using the whole sheet for a project, cutting ABS at your home workstation can be easy with the right tools.

Method 1
Method 1 of 3:

Preparing Your Workstation

PDF download Download Article
  1. A clean bench will help ensure the ABS maintains its integrity and look without getting metal or other debris embedded in it. [1] Wipe any dust or debris from the benchtop using a shop cloth.
    • For a slightly deeper clean, use a mild household detergent along with a shop cloth. [2]
  2. A sheet of ABS plastic will have a smooth side and a textured side. You’ll want to display the textured side since it is more resistant to scratches. [3] Mark the shapes that you are cutting out.
    • Use a water-soluble marker so the marks can easily be wiped away with a damp cloth when you are finished. [4]
    • If making straight cuts, use a ruler or straight-edge to guide the marks.
    • For curved lines or circles, use a compass or protractor. You can also trace curved objects, like bowls or coffee cans to stay precise.
    Advertisement
  3. Using a few hand clamps will help keep the plastic steady as you are making your cuts. Place the clamps near the edge you are about to cut for the least amount of movement.
    • Use a flat board and clamp each end to the table to hold the entire sheet of plastic flat and to provide yourself with a straight-edge. [5]
  4. Advertisement
Method 2
Method 2 of 3:

Picking the Correct Tools

PDF download Download Article
  1. Plastic-cutting blades have a higher tooth count than a standard wood-cutting blade. [6] This allows for a smoother cut without having jagged edges. It also helps prevent kickback if you’re using an electric saw. Ensure you’re using a blade meant for cutting plastic.
    • Use a thicker blade so the plastic does not melt and stick back together. [7]
    • Other alternatives include cutter tools or a grinder with a metal cutting blade.
  2. If you are trying to cut out smaller windows in larger sheets or making small handheld crafts, use a craft blade to chip away small bits of plastic. [8]
    • Drill holes to use as starting points for the blade and shave away the plastic until you reach the guide lines. [9]
  3. Clamp a piece of straight wood across the plastic with the line you intend to cut hanging slightly over the edge to cut a straight line. Guide the saw through the plastic sheet, keeping your hand on the wide portion of the saw shoe. [10]
  4. Jigsaws allow for better mobility as you make curved cuts into the plastic. Using a blade with 10 teeth per inch, turn the plastic to make the shapes you need. [11]
    • Drill holes in the plastic along the guide lines so your blade has places to start and stop easily. [12]
    • Make straight relief cuts from the outside of the plastic to the curves. This will help prevent the plastic from warping and shortens the cutting distance.
    • Leave room between the guide lines you’ve drawn and where you cut. You can always file these down later.
  5. This type of saw makes cuts only when you pull it, unlike other hand saws that cut when you push and pull it. [13] A pull saw helps make a cleaner, smoother line in your plastic and may be easier for making shorter straight cuts than an electric saw.
    • Use your thumb to guide the blade when you make the initial cut. From there, place the saw into the line you’ve made and pull the saw through. [14]
  6. Advertisement
Method 3
Method 3 of 3:

Working with the ABS Plastic

PDF download Download Article
  1. When making long cuts, clamp a straight piece of plywood to the plastic near the guidelines. If you’re using a circular saw, hold the saw shoe against the board to ensure the line you cut stays straight. [15]
  2. Leave extra room between the guide lines and the cut you make. This added space will help guarantee that you do not cut too far into the shape you are trying to make and can always be filed down once you are finished.
  3. Remove any areas that seem bumpy or rigid by applying pressure to the side you are filing. Continue using the file until you reach the desired smoothness for the plastic.
    • Use long, steady strokes to avoid heating and melting the plastic. [16]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do you attach polycarbonate to steel beams?
    T. Chinsen
    Top Answerer
    E6000 is a clear industrial strength glue that works well in attaching two dissimilar materials. There are other compounds that can secure these materials but are not clear. Be aware that there may be some chemical reaction from the glue as it will contain solvent to keep it flowable. Check the adhesive package for its recommended usage.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 63,471 times.

      Did this article help you?

      Advertisement