How to Find a Sewer Line

PDF download Download Article
PDF download Download Article

Sewer lines transport wastewater from your home to either the city’s main line or to a septic tank on your property. If you’re installing a new sink or toilet, you need to connect it to your home’s sewer line so fresh water doesn’t get contaminated. When you’re trying to find the sewer line on your property, contacting the city or a professional service is the easiest way. If you still need to find the sewer lines, feed the detector of a pipe locator into a drain and use the wand to find it in your pipes. As soon as you know where your sewer line is, you can start working!


Method 1
Method 1 of 2:

Using a Pipe Locator

PDF download Download Article
  1. A pipe locator is usually broken into 2 parts, which are a long detector line with a transmitter that you feed into the pipes and a handheld wand that’s used to locate the line. Turn on the transmitter and the wand using the power switches or buttons and look at the frequencies they’re reading. Use the “Frequency” option or the arrow keys on the machines to adjust the frequencies so they have the same readout, or else the locator won’t be able to find the pipes. [1]
    • You can buy pipe locators online, but they can cost upwards of $1,000 USD.
    • Contact local hardware stores to see if they offer pipe locator rentals so you can use one without spending a lot of money.
  2. Feed the detector line 15 ft (4.6 m) into a drain or sewer cleanout . You can use any drain in your home, such as a sink or bath, to feed your line into if you need to find the line in your home. If you’re looking for a sewer line outside, look for a black or white pipe with a plastic cap along the outside of your home, which allows direct access to your home’s main sewer line. Unwrap the detector line from the spool and push the end through the pipe so it extends out about 15 feet (4.6 m). Leave the line in place so you can find it with the wand. [2]
    • Avoid putting the line into your toilet since it won’t work as well if it’s submerged.
    • Older homes may not have a sewer cleanout in their home. Contact a plumber to come to install one for you to make it easier to locate lines later on or break apart clogs.

    Tip: If the detector line stops or doesn’t go the full 15 feet (4.6 m), then there may be a clog in the pipe .

    Advertisement
  3. Keep the wand pointed vertically at the ground so it can pick up the best signal reception from the detector. Walk in the direction you think the sewer line travels and move the tip of the wand back and forth. As you follow the detector line, the wand will create a beeping signal that gets louder and higher when you get closer to the end of the line. When the wand creates the loudest and highest pitch, you’re close to where the line ends. [3]
    • Try rotating the wand if you hear a weak signal since it could mean that you’re nearby but facing the wrong direction.
    • The display on the wand may also have arrows or a number indicator that tells you when you’re getting closer to the end of the detector line.
  4. If the wand maxes out its reading, then the end of the detector line is nearby but you won’t know where it is accurately. Locate the button that controls the sensitivity and reduce it to ¾ power. Keep the wand pointed down as you wave the end around the area again. Listen for the loudest and highest pitch again to get a better idea of where the sewer line is located. [4]
    • If the reading maxes out again, reduce the sensitivity by another 10-15% and try waving the wand over the area again. Repeat the process until it doesn’t max out anymore.
    • Some pipe detectors may also be able to tell you how deep the pipe is on the display.
  5. Once the wand only produces a signal over a single area but goes quiet when you wave it around, you have successfully found the end of the detector. Place a strip of tape on the ground going in the same direction you’re facing to mark the pipe. If you’re outside, put a small utility flag in the ground so you know that the sewer line is directly below it. [5]
    • You can buy utility flags from your local home or yard care store.
  6. Go back to the detector line and transmitter and unspool more into the pipe. Don’t extend the line any further than 15 feet (4.6 m), or else you may not get as accurate of a reading or it may be difficult to find the end of line if the pipe turns. [6]
  7. Repeat the process of waving the wand around until you hear the strongest signal from the end of the detector line. Turn down the sensitivity once it maxes out and keep honing in on the location of the pipe. Mark the second spot with more tape or a flag so you know where the sewer line travels. Keep extending the line and locating until you’ve marked the length of sewer line that you need. [7]
    • If the detector line ever gets caught, there may be a fork in the sewer pipe or it could be clogged.
    8. Advertisement
Method 2
Method 2 of 2:

Checking with the City

PDF download Download Article
  1. The zoning office for your city controls the city plan and keeps track of utility lines and services in your area. Either call or go directly to the office to ask them if they’re able to check where the sewer lines are located. Most times, they’ll be able to show you where the underground lines come from your home and extend to the main city line. [8]
    • Some zoning offices may not be able to locate the sewer lines on residential property.
    • Learn the official property lines for your home so the zoning office doesn’t give you any false information.

    Tip: If your area doesn’t have a zoning office, check for a city maintenance department since they may be able to locate sewer lines for you.

  2. Some cities will post interactive maps online so you can easily see all of the sewer and utility lines on your property. Search online for your city’s name with the phrase “water and sewer map” to see if one is available online. Type in your address or locate your property on the map to see where the sewer lines run in your home. [9]
    • Smaller towns and cities may not have online maps for water and sewage.
    • Some maps show detailed information, such as the length of the pipe and how deep it is, when you click on a specific sewer line.
  3. In the United States, 811 is a phone number you can call to notify utility companies before you dig so they can mark hidden lines underground. Reach out to 811 and tell them your address so they know where to send utility workers. Within the next 2–3 days, professional utility companies will visit the area and mark the lines in your yard with either small flags or lines of paint. Once they mark the location, check for a line that’s labeled “S” or “Sewer” to know where your line is. [10]
    • Calling 811 is a completely free service, so you don’t have to pay utility companies to mark your yard.
    • The utility companies that are contacted depends on the area where you live, so they may not mark sewage lines.
  4. Tell the plumber that you want to locate the sewer lines running through your home and property so they can point them out to you. The plumber will go through your home and locate the pipes connecting to your home’s main sewer line with little to no damage to your home. [11] Write down the locations that the plumber tells you or mark them with tape so you know where to access the lines later. [12]
    5. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do I find the sewer trap on my home?
    David Balkan
    Professional Plumber
    David Balkan is a Professional Plumber, CEO of Balkan Sewer and Water Main Service, and President of Balkan Sewer and Drain Cleaning. As a hands-on owner of these companies for over 40 years, David is knowledgeable about water service lines, sewers, and drain line issues. David is a Committee Chairman of the Master Plumbers Council and has sat on the Executive Committee of the Sub Surface Plumbers Association of New York for over 30 years. His knowledge and solution-oriented approach contributed to Balkan Sewer and Water Main Service being the largest and most trusted service in New York City and the recipient of the 2017 Angie’s List Super Service Award.
    David Balkan
    Professional Plumber
    Expert Answer
    For most people, the easiest way to find that is to find the fresh air inlet. It's a U-shaped pipe usually located near the front of your home, but it's sometimes covered by a round or square vent plate. The main trap is always in front of that vent.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You are responsible for the sewer lines that are on your property, so make sure that they stay well-maintained. [13]
        Thanks
        Helpful 0 Not Helpful 0
      • If you have a clog in your sewer line, check for a sewer cleanout in your yard or home so you can easily access the pipes.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never dig in your yard to find a sewer line unless you know where the pipe is located, or else you may damage it.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Construct a Small Septic System
      How to
      Unclog a Main Sewer Line Without a Snake
      How to
      Install a Septic System
      How to
      Install a Sump Pump
      How to
      Clean out a Sump Pit
      What to Do (and Not Do) to Break Down Solids in a Septic Tank
      How to
      Unclog Your Septic Tank
      How to
      Install a Sump Pump Check Valve
      How to
      Clean a Septic Tank
      How to
      Use a Submersible Pump
      How to
      Find Your Septic Tank
      How to
      Care for a Septic System
      Advertisement

      References

      1. ↑ https://youtu.be/ftyTG6xhYwQ?t=164
      2. ↑ https://youtu.be/GRc_yq7uMX4?t=121
      3. ↑ https://youtu.be/ftyTG6xhYwQ?t=340
      4. ↑ https://youtu.be/ftyTG6xhYwQ?t=357
      5. ↑ https://youtu.be/rfKL4INvijQ?t=36
      6. ↑ https://youtu.be/SzMrGujPyNo?t=558
      7. ↑ https://youtu.be/ftyTG6xhYwQ?t=465
      8. ↑ https://www.monroeohio.org/270/Building-and-Zoning
      9. ↑ http://www.seattle.gov/utilities/construction-and-development/dso/water-and-sewer-map
      1. ↑ https://call811.com/start-here/homeowners
      2. ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 23 February 2021.
      3. ↑ https://www.sandiego.gov/public-utilities/customer-service/your-home-plumbing/sewer
      4. ↑ https://www.suisun.com/sewer-laterals/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 79,797 times.

      Reader Success Stories

      • Carol

        Jun 14, 2021

        "I am an older female who needs to handle all home issues on my own. I was very stressed before reading this because ..." more
      Share your story

      Did this article help you?

      Advertisement