Download Article
Download Article
Ever wanted to grow bacteria for a science project or just for fun? It's surprisingly simple! All you need is some agar (a special gelatinous growing material), a number of sterilized Petri dishes, and some disgustingly good sources of bacteria!
Steps
-
Prepare the agar. Agar is a jelly-like substance used to culture bacteria. It is made from a type of red algae, which provides an ideal growing surface for many different types of bacteria. Some types of agar contain added nutrients (such as sheep's blood and others) which help to promote more vigorous bacterial growth.
- The easiest type of agar to use in this experiment is a nutrient agar which comes in powder form. You could also use any type of powder agar or any agar in general. You will need as much agar as you need, but don't use less than 1.2 grams (½ teaspoon) of agar powder for every 10 centimetres (3.9 in) Petri dish you wish to use.
- In a heatproof dish or bowl, stir 1.2 grams (½ teaspoon) of the nutrient agar powder into 60 millilitres (0.25 c) of hot water. Multiply these quantities by however many Petri dishes you plan on using.
- Place the bowl or dish in the microwave and let it begin to boil for 1 or more minutes, watching to make sure that the agar solution doesn't boil over.
- When the solution is ready, the agar powder should be completely dissolved and the liquid should be clear in color.
- Allow the agar solution to cool for several minutes before proceeding. You don't want to get burnt!
-
Prepare the Petri dishes. Petri dishes are small flat-bottomed containers made of clear glass or plastic. They have two halves - a top and a bottom - which slot into one another. This protects the contents from any unwanted contaminated air, but also allows any gasses produced by the bacteria to escape. [1] X Research source
- Petri dishes must be completely sterilized before they are used for growing bacteria, otherwise, the results of the experiment could be affected. Newly purchased Petri dishes should come pre-sterilized and sealed in plastic packaging.
- Remove the Petri dish from its packaging and separate the two halves. Very carefully, pour the warm agar solution into the bottom half of the Petri dish - just enough to form a layer over the bottom of the dish. Work in the presence of a candle with a tall flame or a Bunsen burner to keep contamination low.
- Quickly replace the top half of the Petri dish to prevent any airborne bacteria from contaminating the experiment. Set the Petri dishes aside for 30 minutes to 2 hours, until the agar solution cools and hardens (when it’s ready it will resemble set Jell-O).
Advertisement -
Refrigerate the Petri dishes until ready to use. If you don't plan on using the agar-filled Petri dishes immediately, they should be stored in the refrigerator until you are ready to proceed with the experiment. [2] X Research source
- Storing the Petri dishes in the refrigerator prevents the water inside the dishes from evaporating (bacteria need a moist environment to grow). It also allows the surface of the agar to harden slightly, which prevents any tearing or gouging when you transfer your bacteria samples.
- When storing Petri dishes in the refrigerator, the dishes should be placed upside down. This helps to prevent any condensation on the lid from dropping down and disrupting the growing surface.
- Agar-filled Petri dishes will be kept in the refrigerator for as long as a couple of months. When you are ready to use them, remove them from the refrigerator and allow them to reach room temperature before introducing your samples.
Advertisement
-
Introduce bacteria to the Petri dishes. Once the agar solution has hardened and the Petri dishes are at room temperature, you are ready for the fun part - introducing the bacteria. There are a couple of methods of doing this - through direct contact or through sample collection. [3] X Research source
- Direct contact: This is when bacteria are transferred to the Petri dish using direct contact, i.e. touching the agar. One of the most common ways of doing this is to simply press your fingertip (either before or after washing your hands) lightly onto the surface of the agar. However, you could also try pressing a fingernail or the surface of an old coin into the agar or even placing a small hair or drop of milk into the dish. Use a sterile cotton swab if you have one available. Use your imagination!
- Sample collection : With this method, you can collect bacteria from almost any surface and transfer it to the Petri dish, all you need are some clean cotton swabs. Simply grab a swab and swipe it over any surface you can think of - the inside of your mouth, a door handle, the keys on your computer keyboard, or the buttons of your remote control - then use it to streak the surface of the agar (without tearing it). These places harbor a lot of bacteria and should provide some interesting (and disgusting) results in a couple of days.
- If you like, you can place more than one sample of bacteria in each Petri dish - all you need to do is divide the dish into quadrants (quarters) and swipe a different sample of bacteria in each of them.
- It is recommended that you keep one quadrant of the Petri dish free of bacteria samples to use as a control group. This allows you to know if the agar had been contaminated prior to the introduction of bacterial samples.
-
Label and seal the Petri dishes. Once you have introduced the bacteria, you should replace the lid on the Petri dish and seal it with some parafilm or Saran wrap. [4] X Research source
- Make sure to label each Petri dish with the source of the bacteria it contains, otherwise, you won't be able to tell which is which. You can do this using some tape and a marker.
- As an extra precaution, you can place each Petri dish in a zipper-lock bag. This will provide an extra layer of protection against any hazardous bacteria colonies that may develop, but will still allow you to view the contents of the Petri dish.
-
Place the Petri dishes in a warm, dark place. Leave the Petri dishes in a warm, dark place where the bacteria can develop, undisturbed, for several days. Remember to store the dishes upside down, so the bacterial growth remains undisturbed by any water droplets. [5] X Research source
- The ideal temperature for growing bacteria is between 70 and 98 degrees F (20-37 degrees C). If necessary, you can place the Petri dishes in a cooler location, but the bacteria will grow a lot more slowly.
- Leave the bacteria to develop for 4-6 days, as this will give the cultures enough time to grow. Once the bacteria begins to grow, you may notice a smell coming from the dishes.
-
Record your results. After a couple of days, you will notice an amazing variety of bacteria, molds, and fungi growing inside each Petri dish.
- Use a notebook to record your observations on the contents of each dish and perhaps come to a conclusion about which locations had the most bacteria.
- If you like, you can measure the daily growth of the bacteria colonies by using a felt-tip marker to trace a circle around each colony on the bottom of the Petri dish. After several days, you should have a collection of concentric rings on the bottom of each dish. This will help you count and record the data.
-
Test the effectiveness of antibacterial agents. An interesting variation of this experiment is to introduce an antibacterial agent (hand sanitizer, soap, etc.) to the Petri dish in order to test its effectiveness. [6] X Research source
- Once you have introduced bacteria to the Petri dish, use a cotton swab to place a small drop of hand sanitizing gel, disinfectant soap, or household bleach into the center of the bacteria sample, then continue the experiment as normal.
- As the bacteria in the dish grows, you should see a ring or "halo" around the spot where you placed the antibacterial agent where no bacteria is growing. This is known as the "kill zone" (or more accurately, the "zone of inhibition").
- You can measure the effectiveness of different antibacterial agents by comparing the size of the kill zones in each Petri dish. The wider the kill zone, the more effective the antibacterial agent.
Advertisement
-
Take the proper safety precautions. Before you attempt to dispose of your Petri dishes, you first need to take the proper safety precautions. [7] X Research source
- Although most of the bacteria you grow will not be hazardous, large bacteria colonies may pose more of a risk - so you will need to kill them before disposal using household bleach.
- Protect your hands from the bleach by wearing rubber gloves, protect your eyes with plastic goggles, and protect your clothes by wearing an apron.
- Cover open cuts with rubber gloves and avoid ingesting or breathing in the bacteria as it grows.
-
Pour bleach into the Petri dishes. Open the Petri dish and carefully pour a small amount of bleach on top of the bacteria colonies, holding the dish over a sink. This will destroy the bacteria. [8] X Research source
- Be very careful not to let any of the bleach touch your skin, as it will burn.
- Then place the disinfected Petri dish into a ziplock plastic bag and dispose of the bag in the trash.
Advertisement
Expert Q&A
Search
-
QuestionCan you reuse petri dishes?Meredith Juncker is a PhD candidate in Biochemistry and Molecular Biology at Louisiana State University Health Sciences Center. Her studies are focused on proteins and neurodegenerative diseases.While it is generally recommended to use fresh dishes for each experiment, it is possible to reuse dishes if needed. Sterilization methods will vary depending on the material of your dish (glass vs. plastic). If your plastic Petri dishes were used to harvest live pathogens, it is recommended to use a new dish as the risk of cross-contamination is high.
-
QuestionWhere or how do you get nutrient agar? Or do you need to use agar for this project?Community AnswerTo grow bacteria in a lab-like setting, you need agar. You can find it online or through a science supply store.
-
QuestionHow do I find the effect of hand washing on microbial growth?Community AnswerUsing two sets of petri dishes, create one group of bacteria samples taken before washing your hands and one group taken after washing your hands. Compare growth of the bacteria between groups over time.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Try using a potato dextrose agar as a growth medium. Prepare a potato dextrose medium by boiling a 20 grams (0.71 oz) potato, 4 gm (2 tsp) of agar, and 2 gm (1 tsp) of dextrose in a beaker. Put this solution in a Petri dish and let it dry. Take some sterile cotton swabs and rub them over any place (remote, door handle, water pipe, etc.). Close the Petri dish using plastic wrap. Let it incubate for 24 hours in a warm place. The next day, check the Petri dish. You should be able to see colonies of bacteria. [9] X Research sourceThanks
- Petri dishes are not reusable. When left unattended the bacteria will multiply uncontrollably.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- You can make your own agar by combining ½ teaspoon of beef stock powder, ¼ cup of water, 1 teaspoon of sugar, and 1 teaspoon of gelatin.
- Make sure you do not grow bacteria above 40°F (4°C). This is considered the "danger zone" where dangerous bacteria can grow!
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Melted agar is very hot and sticks to your skin, meaning it could give you serious burns if touched.Thanks
- Never put anything in the dish that is likely to grow into dangerous bacteria, such as body fluids.Thanks
- If the dish is reopened it could cause serious illness.Thanks
Advertisement
References
- ↑ https://learning-center.homesciencetools.com/article/bacteria-experiment-guide/
- ↑ https://www.sciencecompany.com/Bacteria-Growing-Experiments-in-Petri-Plates.aspx
- ↑ https://www.giftofcuriosity.com/growing-bacteria-in-a-petri-dish-stem-activity-for-kids/
- ↑ https://www.sciencecompany.com/Bacteria-Growing-Experiments-in-Petri-Plates.aspx
- ↑ https://www.sciencecompany.com/Bacteria-Growing-Experiments-in-Petri-Plates.aspx
- ↑ https://learning-center.homesciencetools.com/article/bacteria-experiment-guide/
- ↑ https://www.sciencecompany.com/Bacteria-Growing-Experiments-in-Petri-Plates.aspx
- ↑ https://sciencing.com/sterilize-petri-dishes-5892646.html
- ↑ https://www.addgene.org/protocols/inoculate-bacterial-culture/
About This Article
Article Summary
X
If you want to grow bacteria in a petri dish, prepare an agar by mixing 1/2 teaspoon of agar powder with 1/4 cup of water. Place the mixture in the microwave for 1 minute until the water boils, and then let it cool to room temperature before pouring the mixture into the dish. Move the dish to the refrigerator until you need them, and then introduce the bacteria by rubbing a swab or dropping liquid onto the agar. Then, use a piece of tape to label and seal the dish, and place it in a dark, warm place for 4-6 days to grow the bacteria. For tips on recording your results and getting rid of the dishes, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 698,441 times.
Reader Success Stories
- "I'm a class 12 student studying in CBSE curriculum. There is an investigatory project section which has 10 marks out of 100. This article has helped my friend and me to carry out our research on finding the most powerful antimicrobial product." ..." more
Advertisement
86%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm a class 12 student studying in CBSE curriculum. There is an investigatory project section which has 10 marks out of 100. This article has helped my friend and me to carry out our research on finding the most powerful antimicrobial product."
..."
more
"This was my first time preforming a science fair experiment, which included growing bacteria. At first I panicked, because I had no idea how to prepare agar plates. Thanks to this article, I received a very high mark! Thank you so much!"
..."
more
"I am a cosmetology teacher, and teach bacteriology to my students. It is very important for them to know how bacteria is produced for preventive measures in a salon setting. I will use this experiment with all my students."
..."
more
"I was doing a science fair experiment and needed help on it. I especially didn't know where to place the Petri dish in order to grow the bacteria. Thank you very much!"
..."
more
"I was going to do an experiment about bacteria growth, and this helped me to prepare my petri dish and keep my experiment organized. "
..."
more
