Download Article
Download Article
Pencil pleat curtains are a great addition to the decor in your house or office. When choosing your curtains, make sure they are the right size. Secure the cords at one end of the heading space before you scrunch the curtains. You may need to use a stepping stool or a ladder to hang the curtains. Once the curtains are hung, step back and admire how they liven up the room.
Steps
-
Pick curtains that are twice the length of the pole or track. Use a measuring tape to measure the length of your pole or track. The width of the curtains you choose should be double the length of the pole or track. If the curtains are not wide enough, they will not fit the pole once they are scrunched. [1] X Research source- For example, if the pole is 2 feet (0.61 m), then pick curtains that have a width of 4 feet (1.2 m).
-
Place the curtain rings on the pole. Remove one side the curtain pole and slip on the curtain rings. Use an even amount of rings. This way, each curtain will have the same amount of rings. [2] X Research source- You will need to purchase the curtain rings separately. Choose rings that match the curtain pole.
- If you have a curtain track instead of a pole, attach an even amount of gliders to the track.
Advertisement -
Tie the cords into a knot to secure one end of the heading tape. The heading tape is the top section of the curtain that contains 3 cords, which are used to scrunch the curtains into pleats. Gather the 3 cords at one end of the heading tape. Tie a knot by looping the cords and pulling the loose ends through the loop. Pull tightly to secure the knot. [3] X Research source- Some curtains may already have one end of the cords sewn into the heading tape. If yours do, then you can skip this step.
- It does not matter which end you tie the curtains off at. However, most people like to tie the knot at the leading edge, i.e., the edge that meets the other curtain in the middle of the pole.
Advertisement
-
Scrunch the curtain until it is half the length of the pole. Hold the untied, loose cords with one hand. Pull the cords to start scrunching the curtain. Use your other hand to gently pull the curtains along the cords. Keep scrunching and pulling until the curtain is half the length of the pole. [4] X Research source- For example, if the pole is 2 feet (0.61 m), then scrunch the curtain until it is 1 foot (0.30 m).
-
Use a slip knot to tie off the loose cords. Hold the loose cords with one hand. Loop the cords around your fingers. Pull the cords through the loop, but not all the way. At this point, the cords will resemble an ear or a loop. Tighten the string around the loop to create a slip knot. Tuck the cords into the pocket between the curtain and the heading tape. [5] X Research source- If your curtains do not have a pocket, then tuck the cords underneath one of the pleat strings.
- Using a slip knot will make untying the knot easier when you take the curtains down to clean them.
-
Even out the pleats once the curtain is secured. Some pleats may look larger or smaller than others. Even out the pleats by gently pulling the curtain along the string. Pull the curtain until all of the pleats along the heading tape are uniform in width and shape. [6] X Research source
Advertisement
-
Choose which row to fasten the hooks onto the heading tape. The heading tape contains 3 rows of pockets located at the top, middle, and bottom. If you want the pole or track to be visible, then choose the middle or top row. If you do not want the pole or track to be visible, then choose the bottom row. [7] X Research source- You will need to purchase the curtain hooks separately.
-
Attach the hooks to every 4th or 6th pocket. Divide the number of rings on the pole by 2. This number is the number of hooks that you need to attach to each curtain. Starting at the outside edge, slip and loop the hooks into every 4th or 6th pocket, depending on the width of the curtain. Make sure the hooks are spaced evenly apart. [8] X Research source- Make sure to attach the hooks to the pockets instead of the cords.
- If you have too few hooks, then the curtain will sag in between. If you have too many hooks, this will restrict the curtain.
-
Hang the curtain up. Drape the bottom of the curtain over your forearm while you attach the hooks. Your forearm will support the curtain’s weight while you hang it. Attach each hook to their designated ring. [9] X Research source- Use a ladder or stool to hang the curtains if you cannot reach the pole or track.
- Repeat this process for the other curtain.
Advertisement
Community Q&A
Search
-
QuestionWhat if I have a curtain rod that uses hooks on a "track" in the back of the rod, not hooks on rings on track? And, can I re-use old hooks from the curtains I'm replacing?T. ChinsenTop AnswererThe hooks that match the curtain rod can always be reused to hang new curtains, so long as they are not damaged or deformed. You may want to lubricate the track of the curtain rod to allow easy movement of the curtain.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Pencil pleat curtains
- Curtain rings
- Curtain hooks
- Measuring tape
- Ladder or stepping stool
References
- ↑ https://youtu.be/zWQDCX3Gang?t=24s
- ↑ https://www.curtains-2go.co.uk/hanging-curtains.htm
- ↑ https://youtu.be/-6nP_Z2u4W4?t=25s
- ↑ https://youtu.be/-6nP_Z2u4W4?t=1m10s
- ↑ https://youtu.be/-6nP_Z2u4W4?t=1m42s
- ↑ https://youtu.be/zWQDCX3Gang?t=1m12s
- ↑ https://youtu.be/-6nP_Z2u4W4?t=2m36s
- ↑ https://youtu.be/zWQDCX3Gang?t=1m16s
- ↑ https://youtu.be/-6nP_Z2u4W4?t=3m15s
About This Article
Article Summary
X
Pencil pleat curtains are a great addition to the decor in your home or office. When choosing the curtains, you’ll want to make sure they’re twice the length of the pole or track so they’ll fit once they’re scrunched. You’ll also need to get curtain rings or gliders to hold your new curtains on the pole or track. To prepare to hang your curtains, scrunch them to half the length of the pole and tie off the cords at the top of the curtains to help them hold shape. Once the curtain is secured, even out the pleats by gently pulling the curtain along the string. You can then attach the hooks to every 4th or 6th pocket, depending on the width of the material, and hang them on the ring or glider. To learn how to choose which row to fasten the hooks to, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 142,815 times.
Reader Success Stories
- "Very helpful in making curtains, measuring and buying the right fabric."
Advertisement
"Very helpful in making curtains, measuring and buying the right fabric."
"Helped me to see how easy it could be to make eyelet top curtains."
