How to Make Curtain Tiebacks

Download Article

Secure your curtains or drapes with a homemade solution

Co-authored by Shaelynn Haning

Last Updated: January 23, 2024

Download Article

Fabric Tiebacks

|

Beaded Tiebacks

|

Brooch Tiebacks

|

Q&A

|

Tips

|

Things You'll Need

Curtain tiebacks are a great way to draw curtains aside and bring light into your room. Making your own tiebacks is a simple and cost-effective way to personalize your room decor, and add an individual flair to your window accents. We'll show you 3 simple ways to make them: with fabric, beads, or a DIY brooch.

Method 1

Method 1 of 3:

Making Fabric Tiebacks

Download Article

1
Cut a 5 by 22-inch (12.7 by 55.88-centimeter) strip out of fabric. ^{[1]
X
Research source} Choose a color and pattern that matches your curtains. This will be enough to make one fabric tieback. If you'd like to make another, simply cut a second piece of fabric.
- If you'd like to make larger tiebacks, try 9 by 30 inches (22.86 by 76.2 centimeters) instead. ^{[2]
  X
  Research source}
Press the strip flat with an iron, using a heat setting that is suitable for the fabric you are working with.

Advertisement
Sew along the long edge and one of the narrow edges. Leave the other narrow edge open so that you can turn the curtain tieback inside out.
Use a chopstick, knitting needle, or some other blunt tool to push the curtain tieback inside out. To reduce bulk and prevent bunching, snip the corners of the seams first, just be careful not to cut through the stitching.
^{[3]
X
Research source} If the raw edge won't stay tucked inside the tieback, secure it with pins.
^{[4]
X
Research source} Use a color that matches your fabric; you can also use a contrasting color if you'd like something more interesting. Be sure to sew back and forth over the start and end of your sewing a few times to prevent unraveling.
^{[5]
X
Research source} Make sure that the rings are big enough to fit over the wall hooks. If you don't have any wall hooks, you'll want to mount some to either side of your curtain. The hooks should be the same color as your wall so that they blend in.
Find a pretty silk or fabric flower that matches your curtain, and hot glue it to the front corner of your tieback. You can also get several flowers, and attach them to the tieback with snaps. This way, you can change out flowers as the seasons change. ^{[6]
X
Research source}
Hook the tieback onto the wall hook. Pull the curtain towards the wall, then wrap the tieback around it. Hook the other side of the tieback onto the hook.

Method 2

Method 2 of 3:

Making Beaded Tiebacks

Download Article

1
Cut a 22-inch (55.88-centimeter) long piece of flexible, aluminum wire. Use a pair of heavy-duty wire cutters to do this. The type of wire used to hang pictures would be ideal, because it is strong to hold back curtains, yet thin enough to go through an acrylic bead. This is enough to make one beaded curtain tieback. If you'd like to make more, you'll have to repeat this method for each one that you make.
- Consider making 3 to 5 beaded strings, each one a little shorter than the other, and tying them all onto the same ring. This will created a tiered effect.
2
Slide the end of the wire through a metal ring, leaving a 2-inch (5.08-centimeter) tail. The ring needs to be big enough to fit over the metal hook mounted on your wall. Something that is about 1-inch (2.54-centimeter) wide would be ideal.
- If you do not have a tieback hook, you should mount one. It does not need to be very big.
With each turn, use a pair of flat-nose pliers to push the wrapped wire up towards the ring. You want it to be as snug as possible. When you have about ½-inch (1.27 centimeters) left, use your pliers to tuck the tail into the wrapped wire.
You will need about 5 to 8 spacer beads for this. The beads need to be small, but not so small that you can't fit them over the wire.
If you have a focal bead, put it in the center. When you are 5 to 5½ inches (12.7 to 13.97 centimeters) away from the end, stop. Acrylic beads are recommended, because they are less-likely to chip or break if they fall.
Again, you will need about 5 to 8 spacer beads for this. You will end up with a 4-inch (10.16 centimeter) long tail.
Slide the end of the wire until you have a 2-inch (5.08 centimeters) long tail. Wrap it tightly around the wire, as before, and tuck the excess into the coils. You will have some wire visible between the beads and the coils. If you don't want this, then start wrapping with a longer tail. Snip off any excess wire when you are done.
8
Use the curtain tiebacks. Hook the ring part of the tieback onto a wall hook. Pull the curtain towards the wall, then wrap the tieback around it. Hook the other end of the tieback onto the hook.
- If you have not already done so, mount a small wall hook to either side of your window.

Method 3

Method 3 of 3:

Making a Brooch Tieback

Download Article

1
Trace a circle onto a sheet of sturdy cardboard. You can make the circle using a compass or a small plate. You can also use a CD instead. The circle should be between 4.75 and 5 inches (12.1 and 12.7 centimeters) wide.
- Use a thin, but stiff, cardboard, such as mounting board or illustration board.
- The color does not matter; however, if you plan on using a light-colored ribbon, you may want to choose a light color for your cardboard.
2
Trace a smaller circle inside the first one. The circle should be about 2 inches (5.08 centimeters) smaller than the first one, and placed right in the center. You will end up with a 1-inch (2.54 centimeters) thick ring.
- For a more delicate-looking tieback, make the circle 1-inch (2.54 centimeters) smaller, so that you end up with a ½-inch (1.27 centimeters) thick ring.
Cut the larger circle out first, then cut the smaller one. Save the ring, and discard the small circle.
4
Secure the end of a ribbon to the back of the ring with some hot glue or fabric glue. You will be winding the ribbon around the ring, so glue the ribbon at a slight angle. Choose a ribbon that is between ½ and 1-inch (1.27 and 2.54 centimeters) wide. The ribbon an be either satin or grosgrain; avoid sheer or lace ribbons.
- Pick a color that contrasts with your curtains. If your curtains have a pattern on them, match the color either to the background or to the pattern.
- For a rustic theme, use jute twine.
Overlap the ribbon with each turn, so that you don't get any gaps. ^{[7]
X
Research source}
Once you are back where you started, cut off the excess ribbon with a pair of scissors, then glue the end down to the back of the ring.
7
Decorate the ring, if desired. Your ring will have a top, bottom, left, and right side. You can only decorate the top and bottom. If you decorate the left and right sides, you won't be able to slide the pin through it. Use hot glue or fabric glue to attach your decorations. Pearl beads, silk flowers, and ribbon flowers are great choices! Make sure that the decorations match the color of your ring or the color/theme of your curtain.
- For a rustic theme, use flat-backed seashells, sand dollars, and starfish.
- Use different sizes for a more interesting design. Place the larger flowers/beads towards the middle, and the smaller ones towards the edges.
- Don't get carried away; less is more!
8
Wrap some matching ribbon around a chopstick to make the pin. Place a dot of glue at one end of the chopstick, and press the end of your ribbon into it. Start wrapping the ribbon around the chopstick, overlapping it with each turn. When you reach the other end, cut off the excess ribbon, and glue the end down. ^{[8]
X
Research source}
- Choose a color that is the same color as your ring, or a contrasting one.
- Try to cover both ends of the chopstick with ribbon as well to conceal any raw wood.
9
Decorate the top, wider part of the pin, if desired. Choose smaller versions of the decorations you used on your ring, and glue them to the top of the pin using hot glue or fabric glue. You don't need to decorate all the way around the pin; just the front will be enough. Don't decorate more than 1 to 2 inches (2.54 to 5.08 centimeters), or the pin won't be able to go through the curtain.
- If you weren't able to cover both ends of the chopstick with ribbon, you can hide the raw wood with a dab or paint or nail polish. Choose a color that matches your ribbon, then let it dry.
10
Use the tieback. This tieback works in a similar fashion to those ring-shaped brooches. Here is how you use it:
- Position the ring in front of the curtain panel.
- Gather the curtain in your hand, and push a small part of it through the ring.
- Place tip of chopstick pin in front of the ring.
- Slide the pin behind the gathered curtain, and out the other side. Make sure that the tip of the pin is in front of the ring.

Community Q&A

Search

Add New Question

Question

How do I determine the length of the tieback?

T. Chinsen

Top Answerer

The article has 5 x 22" (12.7 x 55.88 cm) for a standard tieback length, with larger tiebacks at 9 x 30" (22.86 x 76.2 cm). The thickness of the curtain and how far back you want it pulled needs to be considered for the best look. The article tiebacks' space will basically be at half the length, i.e. a 5.5" / 14 cm and 6" / 15 cm space to hold back the curtains. You can decide the width space needed for the curtains and cut the length accordingly.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 2

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Use colors that match your curtains. You can also use a color that contrasts nicely, with your curtains.

Thanks
Helpful 1 Not Helpful 0
Topstitching can easily become part of the design. Instead of matching the thread color to the fabric, use a contrasting color instead.

Thanks
Helpful 3 Not Helpful 0
Match the theme of the tiebacks to the theme of your curtains or room decor.

Thanks
Helpful 1 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!