If you have a large canvas painting or picture that you can't wait to display, you may be wondering the best way to hang it in your home. You will need to prepare your canvas and take some measurements to figure out the best placement for your new lovely piece of art. When you’re done, your friends may think you had help hanging it from a gallery professional!
Steps
-
Check the mounting hardware on the canvas. Check the quality of the frame and wire on the back of the canvas by holding the canvas by the wire and lifting it up and down a few times, as if lifting weights. If you don’t hear any creaking or feel any give to the wire, it should be secure to hang. [1] X Research source
-
Add mounting hardware and wire to the canvas if necessary. If your canvas doesn’t come with hanging wire, or if you need to replace it, you can do so by attaching two D-rings with screws to both sides of the back of the canvas. With a ruler, measure 1/3-1/4 down the back of the canvas from its top and make a mark in pencil. Use the exact same measurement on both sides. Attach the D-rings with screws at the pencil marks.
- Measure your wire across the width of the canvas and cut it so that it is 8 to 10 inches (20 to 25 cm) longer than the D-rings on both sides. You need it longer to have enough wire for twisting. Twist the wire around each D-ring and underneath itself several times so that it is knotted and secure. Clip any excess wire.
- Use a wire gauge that can withstand the weight of your canvas. Most picture wire packaging will display how much weight the wire can hold, but ask a hardware store employee if you are unsure.
- You can also use sawtooth hangers to hang up a large canvas. Position a sawtooth hanger about 3 inches (7.6 cm) in on either side of the top of the canvas for best results. [2]
X
Expert Source
Peter Salerno
Installation Expert Expert Interview. 10 June 2019.
Advertisement -
Obtain picture mounting hardware for the wall. Painting hooks are available at most hardware stores, and they come in 10 pounds (4.5 kg) up through 75 pounds (34 kg) varieties. You can double them up for heavier canvases. Floreat hangers are a popular brand because the nails are tempered, they go in at the appropriate 30 degree angle, and are relative easy to remove in case of error. [3] X Research source
-
Obtain drywall anchors if necessary. For pieces over 120 pounds (54 kg), you will want to install drywall anchors at your hanging point. The best type to use are expanding metal screws that are driven into the wall with a hammer and then screwed in to create a flange behind the drywall.
- Follow all directions carefully on the packaging when installing drywall anchors.
- For hanging a canvas on other wall material such as brick or concrete, you will need to use mortar or concrete anchors. [4] X Research source
-
Measure the height of your canvas and divide that number by 2. This will give you the halfway height, or midpoint, of your canvas, which is important in determining how high up on the wall your canvas should go. Use a tape measure to measure the height, divide by 2, and write this number down. [5] X Research source
-
Add the halfway height number to your ideal height. Your ideal height is how high on the wall you want the center of your canvas to be. Most galleries place the center of a canvas at average eye level, or 58 to 60 inches (150 to 150 cm) from the floor. If you are hanging the canvas above furniture, it still looks best with the center at this height; you will just want to leave 8 to 12 inches (20 to 30 cm) between the bottom of the canvas and the top of the furniture. This works for most pieces except especially tall ones.
- Try holding the piece with the center at 58 to 60 inches (150 to 150 cm) from the floor, and if the canvas bottom is closer than 8 inches (20 cm) to the top of your couch (or table, etc.), you may want to find a different space for the canvas.
- For instance, if the halfway height of your canvas is 10 inches (25 cm), and your ideal height is 60 inches (150 cm) from the floor, the number you’ll write down is 70 inches (180 cm). [6] X Research source
-
Subtract the distance between the top of the artwork and the highest point of the picture wire. Measure the distance between the top of your canvas and the highest point in the wire on the back, if it is stretched up to its highest point. Subtract this number from the number in the previous step. This will give you the distance from the floor that you will mark your hanging point.
- For instance, using the same size canvas as the previous example, if the distance between the top of the canvas and the highest point on the picture wire is 8 inches (20 cm), you’ll subtract 8 inches (20 cm) from 70 inches (180 cm). This point, 62 inches (160 cm) from the floor, is where your mounting hook will go into the wall. [7] X Research source
-
Mark where you will place your hook on the wall with pencil. Measure from the floor the number that you got in the last step. This is where your hook(s) will hang on the wall. [8] X Research source
-
Hammer your hook(s) into the wall. A single hook or nail will go directly onto the point that you marked on the wall. For heavier pieces, or if you want to be extra sure that your canvas will not shift with vibrations, use two hooks spaced 4 to 5 inches (10 to 13 cm) from each other. From the central point, measure 2.5 inches (6.4 cm) to the left, and 2.5 inches (6.4 cm) to the right, and mark two new spots to hammer in two hooks.
- To be sure that multiple hook points are the exact same height, measure the distance from them to the floor and adjust if needed before hammering the hooks into place. [9] X Research source
-
Place your canvas on the hook(s). Carefully set the wire onto the hook(s) attached to the wall. Adjust the canvas to look as straight and level as you can from where you are standing. [10] X Research source
-
Use a level to check that the canvas is straight. Gently place a level at the top of your canvas. If the bubble in the tube is in the center of the two lines, then your canvas is level. If the bubble slides more to one side or the other, your picture is slanted. Adjust the canvas as needed until the bubble falls in the center of the level’s tube. [11] X Research source
Community Q&A
-
QuestionThe canvas picture I have is 24" x 36", and has 2 black square type hangers on it that look like claws along the bottom of the square. What do I use to hang this canvas picture?Community AnswerYou should probably go the safe route and hang it with a nail. If there isn't something like a rope or a string attached to the top of the canvas, you can glue one on yourself so that you can hang it onto the nail.
-
QuestionWhat is the best way to hang a canvas?Drew Hawkins1Community AnswerNails and wall hooks are the easiest and most effective way to hang up a canvas. Mark the spot where you want to hang the canvas and use a hammer to install a single hook and nail at that point. For heavier pieces, or if you want to be extra sure that your canvas will not shift with vibrations, use two hooks spaced 4 to 5 inches (10 to 13 cm) from each other. From the central point, measure 2.5 inches (6.4 cm) to the left, and 2.5 inches (6.4 cm) to the right, and mark two new spots to hammer in two hooks. Then, carefully set the wire on the backside of the canvas onto the hooks and adjust it so it looks straight. If you want to be absolutely sure the canvas is straight, place a level at the top of your canvas. If the bubble in the tube is in the center of the two lines, then your canvas is level.
-
QuestionHow do you hang a large canvas without nails?Drew Hawkins1Community AnswerIf the canvas isn't too heavy, you can use adhesive hooks such as Command hooks. Use a ruler or tape measure to measure and mark the locations where you want to attach your hooks. Make sure you've marked even points so your canvas won't look lopsided. Peel off the paper backing to expose the sticky adhesive underneath. Press and hold the adhesive hooks against your wall for 10 seconds so it firmly attaches. Then, gently place your canvas onto the hooks and adjust it so it looks straight.
Video
Tips
Things You’ll Need
- 2 D-rings and 2 screws (optional)
- Picture hanging wire and wire cutters (optional)
- One or two pieces of picture mounting hardware (ex. Floreat hooks)
- Tape measure or ruler
- Pencil and paper
- Hammer
- Drywall, mortar, or concrete anchors (optional)
- A level
References
- ↑ http://reddotblog.com/how-to-hang-a-painting-a-free-guide-from-xanadu-gallery/
- ↑ Peter Salerno. Installation Expert. Expert Interview. 10 June 2019.
- ↑ http://reddotblog.com/how-to-hang-a-painting-a-free-guide-from-xanadu-gallery/
- ↑ http://reddotblog.com/how-to-hang-a-painting-a-free-guide-from-xanadu-gallery/
- ↑ http://www.wetcanvas.com/forums/showthread.php?t=578714
- ↑ http://www.wetcanvas.com/forums/showthread.php?t=578714
- ↑ http://www.wetcanvas.com/forums/showthread.php?t=578714
- ↑ http://www.wetcanvas.com/forums/showthread.php?t=578714
- ↑ http://reddotblog.com/how-to-hang-a-painting-a-free-guide-from-xanadu-gallery/
About This Article
To hang a large canvas, start by checking the mounting hardware on the canvas. If your canvas doesn’t come with hardware or hanging wire, attach two D-rings with screws to both sides of the back of the canvas and add heavy-duty wire. You will also need to buy a picture mounting hook that can handle the weight of your canvas. Once you’ve determined where the hook needs to go on the wall, mark the spot with a pencil. Use a hammer to insert the hook into the wall exactly where the mark is. Then, hang the canvas on the hook and use a level to make sure the canvas is straight. To learn more about measuring placement for the mounting hook, read on!
Reader Success Stories
- "I used this article explicitly to learn how to hang a large framed abstract piece for the first time!"