How to Harden Modeling Clay

PDF download Download Article
PDF download Download Article

Modeling clay comes in many forms, including polymer and self-hardening, which are often used for making fun projects like dishes, jewelry, and other crafts. You can easily finish your modeling clay craft by hardening polymer clay in the oven, or by letting self-hardening clay air dry.

Method 1
Method 1 of 2:

Baking Polymer Clay

PDF download Download Article
  1. For models that have a closed-off pocket of air, include a vent hole to prevent cracking due to temperature changes in the oven. Pierce the clay with a needle all the way through until you reach the inner air pocket. [1]
    • If you don’t have an air pocket in your model, don’t worry about creating vent holes!
    • Be sure to pierce at least 1 hole for each air pocket to ensure proper venting.
    • For example, many clay models of animals have an air pocket inside to make them lighter. Additionally, jewelry like earrings and pendants can have air pockets, especially if they’re very intricate pieces.

    Keep in mind, some clays aren’t meant to be hardened, such as oil-based modeling clay, so check the packaging of the clay that you’re using to make sure it’s possible!

  2. Most brands have the amount of temperature labeled on the package, which can range from 212.5 to 300 °F (100.3 to 148.9 °C). Check the packaging to see if the baking temperature changes based on the thickness of the clay, and set the temperature on the oven. [2]
    • If you’re using multiple different brands of clay in one model, go with the directions for the brand that you used the most. If you’re not sure, set the temperature to 265 °F (129 °C).
    Advertisement
  3. Watermark wikiHow to Harden Modeling Clay
    While the oven heats up, transfer your clay model onto a piece of oven-safe ceramic. You can use a baking dish, like a ceramic pie dish, or even a ceramic tile. [3]
    • Ceramic holds heat well and prevents the temperature from changing too quickly when the oven door is opened.
    • Avoid using metal or glass, which tend to fluctuate in temperature.
    • Bake the clay over a surface that you're not going to reuse for food, as polymer clay has a lot of colorants. [4]
  4. One of the great things about painting polymer clay is that you don’t need to let the paint dry before baking the clay. As soon as you’re finished covering the model in 1-2 coats of paint, fire up the oven to prepare for baking.
    • Adding a glaze or paint might add to the baking time of your model. In general, for each coat or paint or glaze, add 3-5 minutes onto the baking time.
  5. Most brands of clay have a bake time somewhere between 10-30 minutes, depending on the thickness and color of the clay. As a general rule, bake for the amount of time specified on the package for each 1 ⁄ 4  in (0.64 cm) of thickness. [5]
    • For example, if the package says to bake for 15 minutes, and your clay is 1 ⁄ 2  in (1.3 cm) thick, then you would bake the clay for 30 minutes.
    • If you’ve lost the packaging, it’s generally safer to bake at a lower temperature for a longer period of time, like 30-40 minutes.
  6. Get a large cooking pot or bucket that will fit your clay model. Then, fill it with ice water, with about 2 inches (5.1 cm) of space at for the water displacement.
    • You want the clay to be completely submerged in the water, so try to use as large of a pot as possible.
  7. Once the clay has reached its baking time, use a spatula to separate it from the ceramic. Carefully transfer the model to the pot, and submerge it in the ice bath for at least 30 seconds to prevent the clay from over-baking. Then, carefully remove the model with your hands or a pair of tongs.
    • When you remove the clay from the oven, it might be somewhat soft on the outside, and some tools, like tongs, can leave marks and indentations on the hot clay. Only use the tongs to remove the clay from the ice bath, not put it in.
    • If you’re not sure how to transfer the model, try submerging it while it’s still on the ceramic.
    8. Advertisement
Method 2
Method 2 of 2:

Drying Self-Hardening Clay

PDF download Download Article
  1. Keep the clay in a dry, well-ventilated area, and leave it undisturbed. Every 4-6 hours, check on the clay to look for cracks or chips, and make sure the clay is hardening. The drying time will vary based on the thickness of the clay and the moisture in the air, but most types of air dry clays will be completely dry within 72 hours. [6]
    • If your clay isn’t hardening after 12 hours or so, try increasing the temperature by blowing the clay with a hair dryer, or placing it in the oven on the lowest temperature for 1-2 hours. Check on the clay often.
  2. Watermark wikiHow to Harden Modeling Clay
    As the clay begins to dry, you might notice some cracks or dents forming in the clay that weren’t there before. To smooth them over, dip your fingers into a glass of clean water, and rub the water over the imperfection a few times to smooth it out. [7]
    • If you notice larger cracks forming throughout the drying process, you may need to rework the project by reviving the clay . This involves adding a small amount of water to the clay, and placing it in a plastic bag to sit for about 10 minutes. Then, knead the clay and continue adding small amounts of water until it is usable.
  3. Watermark wikiHow to Harden Modeling Clay
    If your clay model is multidimensional, like a pot or a piece of jewelry, flip the piece over to let the bottom dry. You should do this about halfway through the drying time, which will vary depending on the type of clay you’re using. [8]
    • When handling the clay, be very careful. Try to avoid touching it for longer than you absolutely need to.
  4. Adding color or a design to your clay is easy. Simply wait until the clay has dried, and use a paintbrush to apply acrylic or tempera paint. Then, let the paint dry for 24 hours, and protect the paint by using a spray-on or brush-on paint sealant all over the clay. [9]
    • If you’re making an intricate design on a clay pot, for example, make sure you use a thin, fine paintbrush, and seal the entire pot after the paint has dried.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Why doesn't modeling clay harden?
    Community Answer
    Because modeling clay is oil-based. If you put the clay in the oven it will melt and could start a fire.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 69 Helpful 268
  • Question
    Will painting modeling clay make it harder?
    Community Answer
    The paint on the modeling clay will harden, but the structure will still be fragile to the touch.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 43 Helpful 108
  • Question
    After hardening, how can I loosen the clay to make another model?
    Community Answer
    You can't loosen any hardened clay. Either it's modeling clay, and it won't ever harden; or it's one of the other 3 types mentioned, and it isn't designed to be remoldable.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 43 Helpful 80
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • When baking clay, try to avoid opening the oven door. This can cause heat to escape or lead to cracks in the clay due to abrupt temperature changes.
        Thanks
        Helpful 0 Not Helpful 0
      • Be patient! For some brands, it can take up to 72 hours for the clay to harden completely. If you touch it or move it before that time, you risk ruining your project.
        Thanks
        Helpful 0 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Make Modelling Clay at Home
      How to
      Sculpt Using Polymer Clay
      How to
      Make a Silicone Mold
      17 of the Most Valuable Pottery and Porcelain Marks
      How to
      Bake Polymer Clay in a Conventional or Toaster Oven
      How to
      Make a Clay Person
      How to
      Color Air Dry Clay
      How to
      Soften Polymer Clay
      How to
      Revive Dry Clay
      How to
      Make DIY Clay Dolls at Home
      How to
      Drill a Clay Pot
      How to
      Dry Non‐Hardening Modeling Clay
      How to
      Make a Clay Volcano
      How to
      Make a Clay Pot
      Advertisement

      References

      1. ↑ https://campaugusta.org/wp-content/uploads/2020/05/Polymer-Clay.pdf
      2. ↑ https://campaugusta.org/wp-content/uploads/2020/05/Polymer-Clay.pdf
      3. ↑ https://www.youtube.com/watch?v=SjWekXs1HOE
      4. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.
      5. ↑ https://www.youtube.com/watch?v=DiqCDaR37eU
      6. ↑ https://www.artinhealthcare.org.uk/2023/01/25/air-dry-clay/
      7. ↑ https://www.artinhealthcare.org.uk/2023/01/25/air-dry-clay/
      8. ↑ https://www.thetechedvocate.org/3-ways-to-revive-dry-clay/
      9. ↑ https://youtu.be/1bRFJW7Ftd0?t=411
      1. ↑ Deanna Ranlett. Pottery & Ceramics Professional. Expert Interview. 12 November 2021.

      About This Article

      Article Summary X

      To harden modeling clay that's polymer-based, start by placing the clay on a ceramic baking dish. Then, bake the clay in the oven for 10-30 minutes at 215-300 degrees Fahrenheit, depending on what the packaging your clay came in says. When the clay is finished baking, immediately dunk it in a bath of ice water for 30 seconds so it stops baking. To learn how to harden self-drying modeling clay, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 777,181 times.

      Reader Success Stories

      • Joel Wakayima

        Nov 15, 2016

        "Generally speaking, reading about what you people are doing with clay was fascinating. Considering that clay is one ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement