PDF download Download Article
Style experts weigh in on the best way to wear and adjust a watch
PDF download Download Article

You love the way your shiny new watch looks on your wrist, but you can’t help but wonder, “Is it supposed to feel this way? Am I wearing it too tight?” Your comfort is the #1 indicator of a too-tight watch, but if you’re thinking about style or getting the most accurate readings from your fitness watch, there are a few simple guidelines to follow for the perfect fit. In this article, we’ll show you easy ways to test and adjust your watch position and tightness whether you’re wearing a Rolex or a Fitbit. Your perfectly fitted watch is just a tick away!

Things You Should Know

  • Adjust your watch so you can snugly slip a pinky under the clasp. The watch face should sit securely on top of your wrist without rotating or twisting much.
  • Tighten smartwatches so the sensors under the watch face are in constant contact with your skin. Move the watch 2 finger widths up your wrist during exercise.
  • Adjust ill-fitting straps by punching a new hole in leather or rubber strips, removing links from metal bands, or visiting a jeweler or watchmaker.
Section 1 of 4:

Fitting Dress Watches

PDF download Download Article
  1. Slide your pinky between your skin and the clasp of the watch strap. If it fits snugly without having to jam it in there, then your watch is the perfect fit—loose enough to be comfortable, but tight enough to stay in place. [1]
    • Check for marks around your wrist when you take the watch off. If you notice any irritated spots, try wearing the watch a notch looser next time.
    • It’s usually better to err on the side of wearing your watch too loose than too tight. If it’s really tight, it can be painful or affect your circulation.
  2. Stand up and put your arm down at your side, then notice if your watch drops closer to your hand. Ideally, it should only budge a little bit (preferably not any lower than your wrist bone). Raise your arm straight up into the air, too. The watch should fall just beyond its original placement. [2]
    • A great spot to position your watch is just above the wrist bone so that the watch face peeks out from under the cuff of a long sleeved shirt. [3]
    Advertisement
  3. Adjust the strap so the watch face sits securely on top of your wrist (or on the back side if that’s your preference). Check to make sure there’s a little wiggle room for comfort and good circulation, but not so much that the watch face can turn all the way to the other side of your wrist. [4]
    • Wear the watch face on top of your wrist for most casual or formal occasions.
    • Position the watch face on the back side of your wrist to reduce glare, prevent scratches, or to check the time super quickly and discreetly. [5]
  4. Tighten the strap if you’re worried the watch will slide around too much and irritate you, or loosen it if you feel any pain, discomfort, or loss of circulation. Your comfort is the most important factor in the fit, and this will be slightly different for everyone. [6]
    • Other factors that affect comfort include the weight of the watch or the material of the band (metal links can pinch your skin or pull wrist hairs if they’re too tight).
  5. Advertisement
Section 2 of 4:

Fitting Smartwatches

PDF download Download Article
  1. Whether your smartwatch has metal sensors or light sensors, make sure they’re always touching your skin so the watch can monitor your activity accurately. Once it’s on, look under the watch from various angles and try to see the sensors. Ideally, they won’t be visible at all. [7]
    • Tighten the strap so it’s snug, but not so tight that it’s restricting blood flow or causing you pain or discomfort.
    • It’s OK if the watch moves around a little bit as long as the sensors stay in contact with your skin. If it’s sliding around a lot, tighten the strap another notch.
    • This rule of thumb applies to any smart or fitness watch like a Fitbit, Apple Watch, or Garmin.
  2. Slide your watch a bit higher up your wrist than you might normally wear it—this makes it fit a little more snugly and ensures the sensors will touch your skin while you’re working out. If it keeps slipping back down, tighten the strap another notch to keep the watch in place. [8]
  3. Wear your smartwatch slightly looser when you’re not exercising. Tug it closer to your wrist bone or loosen the strap by a notch. Check to make sure it’s still snug enough that the sensors are in contact with your skin. [9]
    • If your watch is too loose, the sensors won’t be able to check things like your pulse or movement very accurately.
    • If your watch is too tight, the extra pressure on your veins and arteries could make your watch think your pulse or blood pressure is higher than it actually is.
  4. Advertisement
Section 3 of 4:

Adjusting the Strap

PDF download Download Article
  1. If your watch strap is one solid piece with holes (i.e. no links or chains), then simply put the prong of the clasp in a different hole until you find a fit that’s comfortable. If your watch is still too loose or too tight after trying all the holes, add a new hole similar to how you’d punch a new hole in a belt . [10]
    • Mark the exact spot where the new hole needs to go so your watch fits comfortably.
    • Use a leather hole punch , a drill, or a similar object to puncture the strap. Put on the watch to test the new hole for comfort.
  2. Put on the watch and gather the slack to determine how many links to remove . Then, use a pin pusher or small screwdriver to remove the pins that hold the excess links in the band. Depending on the style of your band, you may have to remove the clasp or separate the band from the watch face first. [11]
    • Once the excess links are out, reconnect the band to the clasp or watch face and try on the watch to test the fit.
    • A lot of times, metal watch bands come with extra links to accommodate many wrist sizes (it’s generally easier to take them out than to add them in).
  3. If you’re unsure about adjusting the watch yourself or have a watch with an easily replaceable band (like a smartwatch), get a new strap that’s bigger or smaller, depending on your need. This is helpful for people with very thin or very thick wrists who struggle to fit into standard watch band sizes. [12]
    • Measure the circumference of your wrist for the right length (straps are usually measured in millimeters ).
    • Check the width of the old strap so your new one fits onto the watch face.
    • Get a strap of the same quality as your watch. For example, you wouldn’t want a cheap rubber strap on a Rolex (unless that’s your style, then go for it!).
    • Buying a new band or visiting a jeweler may be your only options if your band is a solid metal bracelet.
  4. If you’re hesitant about punching holes or disassembling your fancy new watch strap yourself, take it to a pro for peace of mind. A quality jeweler or watchmaker will have no problem shortening or lengthening the strap for you, although depending on the quality of the watch, it may be a little costly. [13]
    • A jeweler is probably your best bet if the watch is very expensive, vintage, or a family heirloom.
  5. Advertisement
Section 4 of 4:

Benefits of a Good Fit

PDF download Download Article
  1. When your watch fits just right, the face will stay on top or on the bottom of your wrist (whichever you prefer) without rotating around your arm. The band will also stay near the same spot on your wrist, meaning you won’t have to tug it up or down throughout the day to adjust it. [14]
  2. When your watch is too tight, it can be painful and even cut off your circulation. If it’s too loose, on the other hand, you might feel anxious that it will slide right off your hand or get caught on something, and then find yourself checking or adjusting it all day. When it fits just right, you’ll barely notice it physically and your mind will be at ease knowing it won’t slip away from you. [15]
  3. When your watch is too loose and sliding or twisting around, it can make your ensemble look a little more disheveled than you might like. When it’s snugly in place, though, everyone you pass will get to take a look at your timely accessory and admire your styling. [16]
    • Other people probably won’t be able to tell if your watch is too tight (unless it’s cutting off your circulation and your hand turns blue, which is a bigger issue!).
  4. When a band or strap is too tight, the leather, links, or pins can get stretched and wear out faster. Likewise, if it’s too loose, metal links can knock into each other and wear down from friction. You’ll also develop “wrist awareness” when your watch face sits securely in the same spot all the time, which will help you stop knocking the watch on doorknobs, doorways, or other obstacles. [17]
    • For the ultimate protection, wear your watch with the face on the inside of your wrist.
    • A little wear and tear is normal. For fine scratches, just buff the watch face with a soft cloth and polish for acrylic or mineral crystal.
    • Use a jewelers cloth to buff out scratches on a stainless steel band.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can I adjust a watch band without removing the links?
    Bill Green
    Jewelry & Watch Expert
    Bill Green is an Expert Jeweler and Appraiser. He is also the Founder & Creative Director of Jewelry & Timepiece Mechanix, and the Founder and Designer of Amaroo Handmade Opal Jewelry, based in Haddonfield, New Jersey. With over 40 years of industry knowledge, he and his team are known for restoring everything from new watches to vintage jewels and being one of the few shops that still design and make jewelry and watches. Jewelry & Timepiece Mechanix is part of the American Society of Jewelers and Gemologists and Ethical Metalsmiths. Bill studied at the Miami Jewelry Institute and the Gemological Institute of America as well as apprenticed with many accomplished craftspeople.
    Jewelry & Watch Expert
    Expert Answer
    Yes, you can tighten a watch band without removing the links, depending on the type of watch and its bands. Some watches with a snap-down deployment buckle have holes along the side, resembling dots. These holes accommodate a spring bar mechanism inside the buckle. To make the band smaller, you can depress the spring bar and move the clasp closer to the center, effectively shortening the bracelet by the distance between the dots. This adjustment allows for a tighter fit without the need to remove any links from the band.
Ask a Question
      Advertisement

      Tips

      • Your wrist size might change throughout the day to due slight swelling from heat or activity. If the watch starts to feel too tight all of a sudden, loosen it to accommodate. [18]
      • Most people choose to wear their watch on heir nondominant hand.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Wearing your watch too tightly can result in discomfort, pain, skin irritation, or even circulation issues. [19]
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about watch repair, check out our in-depth interview with Bill Green .

      About This Article

      Thanks to all authors for creating a page that has been read 44,812 times.

      Did this article help you?

      Advertisement