Download Article
Download Article
A moment of frustration with a poorly-fitting belt sometimes tempts a person to attack it with scissors or knives, but there are much better ways to do the job. A leather hole punch is ideal, but with patience, you can achieve a relatively tidy hole with an electric drill, or even a Phillips-head screwdriver.
Steps
-
Purchase a leather hole punch. If you want the new belt hole to be as tidy and discreet as possible, a leather hole punch is by far the best tool. These typically cost less than $10 US at a craft or hobby store. [1] X Research source
- Bring along your belt when shopping, to compare the size of the punch with the size of the existing holes. The punching tool tip should fit tightly through the existing holes.
- If you have many belts to adjust, look for a rotary model with a wheel of attachments in different sizes.
-
Mark the location of the next hole. Use a ruler or measuring tape to find the distance between each hole, then measure the same distance past the last hole. Dot the leather with a permanent marker to guide your punching.- "Protecting" the leather from the marker with tape is not a great idea, as the tape itself can cause damage. [2] X Research source A careful dot directly where the hole will go is the safer option.
- If you are making a belt from scratch, the holes are typically spaced ½" (1.25 cm) apart for belts under â…œ" (1 cm) wide, and up to 1â…›" (2.85 cm) apart for belts above 1" (2.5 cm) wide. [3] X Research source
Advertisement -
Position the belt. Place the belt's marked area in between the two halves of the punching tool. Use heavy objects to keep the belt taut, or have a friend pull the belt taut in front of you.
-
Squeeze hard. Squeeze the arms of the hole punch together tightly and firmly. Some thick belts may require strong hands, or someone to wiggle the taut belt back and forth as you squeeze. [4] X Research source Let go when you feel the leather go through, and the hole should be finished.
- If any leather scraps are stuck in the hole, use a toothpick to push them out.
Advertisement
-
Mark the location of the hole. Use a ruler to measure the spacing between the hole, then measure the same distance past the last hole. Use a marker to dot the belt over the area you plan on punching out.
- If your top priority is a comfortable fit, instead wear the belt and pull it to a comfortable position, then mark the belt where the strap tongue touches it.
-
Hold the belt in place. Use heavy objects to weigh down each end of the belt, with the location where the hole will be punched on top of a block of wood or other hard, flat surface.
-
Consider an electric drill. If you have one, an electric drill can be used to drill a hole through the belt, as long as you're careful. Use these tips to keep the hole tidy: [5] X Research source
- Insert drill bits by hand into the existing holes. Select one that fits smoothly but tightly into the hole.
- Use a brad-pointed drill bit if available. If using a smooth drill bit, create a small depression for it to stand in, using a sharp knife or nail.
- Drill in short bursts, especially when starting the hole.
- Make sure to put something, that you don't mind damaging, that doesn't move around behind the belt, that is thick enough, for when the drill bit goes through.
- You can also opt to snipping the other end, once it has penetrated the outer layer a bit, instead of drilling a perfect hole.
-
Use a sharp object instead. The tool designed for this purpose is called an awl, but any sharp, metal stick or even a Phillips-head screwdriver will work fairly well. Push the awl into the leather, then tap it repeatedly with a mallet or hammer. This method takes longer than the others, and you might end up with a messy hole.
- A nail will make a smoother hole through a thin belt, but if you're looking to save time, a screw can be turned through the leather, using its threads to tear through faster.
- Again, be careful of scratching the surface beneath. (Follow the precautions in the previous step.)
Advertisement
Video
Community Q&A
Search
-
QuestionHow do I get a hole in a web belt?Community AnswerYou should be able to do it using just a sewing needle and a pair of chain nose pliers. Stab the needle through, and use the pliers to dig out the piece you're taking out.
-
QuestionWhat if my waist is getting smaller?Community AnswerThat is what this article is for; you can punch a new hole in your belt to make it fit your waist better.
-
QuestionHow do I punch a hole in paper without a punch hole?Ayda CreekCommunity AnswerYou can use scissors, a knife, a pencil, or really anything round and slightly sharp to punch a hole. It may not be the most neat, but it works.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If you are making a belt from scratch, you'll also need an "English point" hole punch to create the hole where the strap end will be embedded. [6] X Research sourceThanks
- You can purchase oval-shaped leather hole punches, but most people will not notice a mix of round and oval holes.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Knives, scissors, or paper hole punches are not recommended. Punching a hole through a belt takes more effort than you might think. Finding a better tool will save time and frustration, and reduce the risk of injury.Thanks
Advertisement
References
- ↑ http://www.manmadediy.com/users/chris/posts/1676-how-to-3-ways-to-punch-a-hole-in-a-leather-belt
- ↑ http://leatherworker.net/forum/index.php?showtopic=17730
- ↑ http://leatherworker.net/forum/index.php?showtopic=27072
- ↑ http://www.extrapetite.com/2010/07/how-to-punch-extra-non-crappy-looking.html
- ↑ http://www.manmadediy.com/users/chris/posts/1676-how-to-3-ways-to-punch-a-hole-in-a-leather-belt
- ↑ http://leatherworker.net/forum/index.php?showtopic=21905
- Videos provided by mars1952
About This Article
Article Summary
X
To punch a hole in a belt, purchase a leather hole punch tool from a craft or hobby store. If possible, bring your belt to the store so you can compare the holes in the belt to the size of the punch. Use a ruler or measuring tape to measure the distance between each of the existing holes, then measure that same distance from the last hole to where you’d like the new one to be. Mark the spot where you want the hole to go with a permanent marker. Weigh the ends of the belt down with heavy objects to keep it taut, or ask a friend to pull it taut for you while you put the punching tool in place. Squeeze the arms of the punching tool firmly to make a new hole in the belt. To learn how to punch a hole in a belt using a leather hole punch, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 329,397 times.
Reader Success Stories
- "I have found wikiHow articles with their accompanying illustrations to be very clear, easily understood and useful and highly recommend wikiHow to others. Thank you!" ..." more
Advertisement
"I have found wikiHow articles with their accompanying illustrations to be very clear, easily understood and useful and highly recommend wikiHow to others. Thank you!"
..."
more
