PDF download Download Article PDF download Download Article

It can be frustrating to deal with constantly foggy goggles when you're trying to work or swim. Luckily, though, there are some simple ways to get rid of the fog quickly. If you have swim goggles, you can try using saliva as a quick fix or buy an anti-fog spray to get rid of the problem completely. If you have scuba gear, consider burning away the film to keep your goggles from fogging up, and for other protective eyewear, try to select a breathable, anti-fogging design.

Method 1
Method 1 of 2:

Using DIY Fixes to Prevent Fog

PDF download Download Article
  1. By lowering the difference in temperatures between the outside of the goggles and your face, you might be able to decrease the amount of fog that forms on the lenses. Splash a little bit of cold water over your face 4 or 5 times immediately before putting your goggles on to cool your face down. [1]
    • While this might work on the fly, this isn't a great long-term fix. Consider investing in different goggles if the problem persists.
  2. Just before putting on your goggles, spit lightly into each lens. [2] Use one finger to lightly spread the saliva around the lenses until both are covered, building up a small film that can reduce fog. [3]
    • While this isn’t a long-lasting method for preventing fog in your goggles, it is one of the most effective methods that won’t cost you a cent. Use this technique if you need to stop your goggles from fogging up for a short period of time.
    Advertisement
  3. Put a small drop of a liquid soap on your finger and rub it around the lenses of your swimming or work goggles. Dip the goggles in some clean, non-chlorinated water and wash the soap away. A tiny amount of soap remaining on the inside of your goggles will stop fog from forming on the plastic.
    • Make sure you wash the excess soap out of the goggles before putting them on, so as to avoid getting soap in your eyes. Using baby shampoo or something similar may also help, as it will hurt less if you get it in your eyes.
    • Instead of soap, you can also use a tiny amount of shaving cream smeared thinly over each lens. Again, make sure you wash it off to avoid getting any minty gel in your eyes as you swim. [4]
  4. Cut a small chunk from a potato to expose some of the flesh. Rub this over the lenses of your goggles to build up a thin protective layer that will work to repel water and moisture from sticking. Wash the lenses in clean water to remove any visible residue. [5]
    • While this may work on plastic lenses, it’s generally most effective when used on goggles with lenses made from glass.
  5. Put a small amount of toothpaste on the inside of your lenses. With a clean, damp toothbrush, spread the toothpaste around and lightly scrub the inside of the lenses. Rinse your goggles in clean, unchlorinated water to remove any leftover toothpaste. [6] [7]
    • The light abrasion of the toothbrush and the toothpaste will remove any protective film on the lenses, as well as giving it a thorough clean. A thin layer of toothpaste will remain, that can help prevent fog from building up on the lenses.
  6. Advertisement
Method 2
Method 2 of 2:

Using Commercial Options to Keep Your Goggles Clear

PDF download Download Article
  1. If you don’t like the idea of putting saliva or soap on the inside of your goggles or don’t find that either of these methods lasts long enough, you can also purchase anti-fog products from your local sporting goods or swim store. You should always follow the manufacturer’s instructions provided, but here are a few products and the recommended way to use them. [8]
    • Spray a small amount of anti-fog spray on the inside of your goggles. Use a clean cloth to rub it into each lens before rinsing them clean. This will get rid of excess spray and leave a thin layer on the inside of your goggles.
    • Take a single fog prevention wipe from its packet and use it to wipe down both lenses of your goggles. [9]
  2. The main cause of fogging in protective eyewear or masks is moisture from your breath or face getting heated and trapped inside the goggles. Look for eyewear with better ventilation, or that will sit further from your face to reduce the amount of moisture and heat that can build up on your goggles.
  3. There are several different types of swimming and scuba goggles that come pre-coated with a layer of material that prevents fog from forming. [10] Look at your local swimming or sports store for goggles that are marked as “anti-fogging” or something similar to easily reduce condensation.
  4. Scuba diving masks are often made with a thin, protective film coating the inside of the lenses, which will easily accumulate fog. Hold a lighter around 2 inches (5.1 cm) away from the lenses and move it around, trying to cover the whole surface of the glass. Let the goggles cool naturally before rinsing them. [11]
    • Make sure not to burn or melt any silicon, rubber or plastic insulation around the edge of the goggles, as this may stop them from being entirely waterproof.
    • If you don’t feel comfortable doing this yourself, your local diving shop may be able to burn your goggles for you.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Does this work with glasses?
    Community Answer
    It all depends on the material of the lens. My guess would be that it probably would.
  • Question
    How do I keep glasses from getting foggy while wearing a mask?
    Community Answer
    Spit into them, rub the saliva and wash away the saliva with water. This will prevent them from fogging up the next time. This also works with action cameras.
Ask a Question
      Advertisement

      Tips

      • Try not to touch the inside of your goggles with your fingers, as this will transfer oil and grime to the lenses that can leave big smudges. [12]
      • If you’re swimming in a chlorinated pool, rinse your goggles in clean water when you’ve finished with them. The chlorine will cause the thin film on your goggles to disappear more quickly, requiring you to apply more soap or anti-fog spray much more often.
      • Keep your goggles as dry as possible when you’re not using them. Any moisture that gets trapped inside the lenses will turn into condensation the next time you go swimming.
      Show More Tips


      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about swimming, check out our in-depth interview with Jacob Siegel .

      About This Article

      Article Summary X

      If your goggles are always fogging up when you go swimming, you can use a few simple tricks to stop this from happening. For a short-term solution, rub a little cold water around your eyes before you get into the pool to lower the difference in temperature. You can also rub a little saliva on the inside of your goggles to build a small film that can reduce fog. Alternatively, rub some liquid soap on the outside of your goggles to stop condensation. Keep your goggles dry when you're not using them. Otherwise, moisture that's trapped in between the lenses will turn into condensation next time you go swimming. For a long-term solution, spray your goggles with anti-fog spray or buy fog prevention wipes from your local sporting goods or swim store. For more tips, including how to choose goggles that don’t fog, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 173,100 times.

      Reader Success Stories

      • Alexis Campbell

        Jan 3, 2019

        "Almost every summer vacation, I end up in a swimming pool splashing and playing around with friends. The thing is, ..." more
      Share your story

      Did this article help you?

      Advertisement